I am receiving the Method or data member not found error message when I attempt to add a new record in form view. I have been working in an old 2002-2003 version of Access until last week when it was converted to 2007. The old version allowed for additions just fine but now after the conversion something is wrong. The code is below. I underlined the line throwing the error message (FindFirst). Code is not my strong suit.
'Open form to new record
gstrCallingForm = Me.Name
strDocName = "frmNewApplicant"
I have a form (frmTimecardsDataEntry3*) that needs to requery combo boxes to narrow down the selections offered in the dropdown of each combo box.
It is a data entry form. I.e. Dataentry is set to yes.
The ClientName combo box has an after update event which requeries the matter combo box, so that the MatterName combo box dropdown only shows the matters relating to that client. This works just fine.
The MatterName combo box has an after update event which requeries the Rate combo box so that in the Rate combo box dropdown only the hourly charge rates relating to that matter are shown. That works too. So far so good.
I then tried adding another after update event to the MatterName combo box, so that another combo box, Application, was requeried too, so with the Private Sub it looked like:
Rate.Requery Application.Requery
But this resulted in the error in the title to this post and the debugger highlighted in red the word Requery in the phrase Application.Requery.
I thought maybe Access does not allow two requeries resulting from one after update event, so instead I took Application.Requery out and placed it as an after update event in another combo box which did not have any other after update events to run.
However, this resulted in the same error.So the error appears to have something to do with trying to requery the Application combo box but I cannot see what is causing the error.
The Application combo box SQL is:
SELECT Applications.ApplicationID, [ApplicationDate] & " " & [ApplicationName] AS ApplicationDisplay, Applications.ApplicationDate, Applications.ApplicationName, Applications.MatterName FROM Applications WHERE (((Applications.MatterName)=[Forms]![frmTimecardsDataEntry3*]![MatterName])) ORDER BY Applications.ApplicationDate, Applications.ApplicationName;
This is the same arrangement of SQL that I am using on the other requeried combo boxes that work. When I take the WHERE statement out of the Application SQL and run it the query returns all of the applications.
I am not sure what the error code is trying to tell me about the attempt to requery the Application combo box.
I have a yes/no box in the form and when the firm is first opened it has a small square dot in it, but as soon as any data is entered in the form the dot clears and leaves the usual empty tick box that you would expect to see.
Also, another possible symptom is that I had another version of this form previously working quite well except that when I did several data entries all at once, so I had several forms filled in with different data (before refreshing and thus entering the data in the table), when I scrolled between the forms I kept losing the MatterName data when I scrolled back, and then when I re-entered the ClientName data the correct MatterName data returned without me having to use the dropdown to select it.
I have had an earlier simpler version of this form working for some time, with ClientName requerying MatterName and MatterName requerying Rate, and I am using the same SQL structures in the new form but getting the error in the title to this post and the other isues just described.
I am getting method of data member not found for the following code when inserting values to a table. Form has three frames. Add/Insert is on OnClick Event.
i have the following code in a function but when i want to compile it i have the following code will be blue i have error in this line:
.NamedParameters = True
the error message is this :
method or data member not found
my code is as following:
Function Get_Bearbeiter_Detail(ByVal vBearbeiter_Code As String, Optional ByRef vBearbeiter_Name As String, Optional ByRef vReadOnly_Flag As Boolean, Optional ByRef vAnalyser_Flag As Boolean, Optional ByRef vAdmin_Flag As Boolean) As Boolean On Error GoTo Err DoCmd.Hourglass True Dim rst As ADODB.Recordset
I'm a newbie trying to upgrade a 2003 database to 2010. When I compile this database an error pops up saying "Method or data member not found". This is the code below:
Private Sub CBPrintReq_Click() On Error GoTo SendPrintError Dim NewID As String, Notice As String, Temp Dim CRLF As String * 3 CRLF = Chr$(10) + Chr$(13) Notice = ""
I have two similar forms with similar controls. I copy 20 pieces of controls to another forms certain tab. When I run code to update database table using the control box value, access can’t find the control box. I got this errors message.
Hi all, I’m trying to filter the records a subform shows based on the employee number (in a combo box) that the user selects in the main form. At the moment im getting the following message when I select an employee number in the combo box: “Compile error, method or data member not found”:confused:
Ive searched the forums on here and tried to make use of the information other people have posted but im still having trouble getting this to work
Below is the code I have on the combo box of the main form:
Private Sub Cbo_Emp_Filter_AfterUpdate() Dim strSQl As String
strSQl = " Select * from DATA-EMPLOYEE_MASTER where DATA-EMPLOYEE_MASTER.EMPLOYEE_NUMBER=" & Form![SCREEN-ABSENCE_TRACKING_MAIN]![EMPLOYEE_NUMBER]
Me.SUBFORM_ABSENCE_TRACKING.RecordSource = strSQl Me.SUBFORM_ABSENCE_TRACKING.Requery End Sub
Ive also posted the database if any one is willing to have a look for me (ive removed irrelevant tables/forms/reports). Im using access 97
For my text box, Text255, on the Subreport I have tried:
Code: Private Sub Report_Load() Me.Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
The table Performance_Requirements_Defaults_Table has just one record for lookup. No value is returned when I run the main report.
I found this: [URL] .....
And tried adding the lookup code to the main report instead of the Subreport, but I think I am having trouble understanding what they mean here: "Subform1 is the name of the subform CONTROL on mainform" Are they inferring that I need to have a text box on the mainform as well?
I tried using this Me!Subform1.Form!ControlName like this:
I know this is not correct, and I have tried several variations, but I am totally stumped. Everything I have tried with the lookup code in the main report returns "Member Not Found" and Text255 is highlighted. I feel like this should not be such a big problem.
I have a strange behaviour on a module which reference to Microsoft Outlook Object Library 14.0. The below code got an error 461 on the folderoutlook.display code,i.e. the method is not found. The funny thing is that the same code gives no problem in another accdb file, exactly same code with same reference on same machine.
Set appOutlook = GetObject(, "Outlook.Application") Set appOutlook = New Outlook.Application Set namespaceOutlook = appOutlook.GetNamespace("MAPI") Dim folderOutlook As Folder Set folderOutlook = namespaceOutlook.GetDefaultFolder(olFolderInbox) FolderOutlook.Display
I created a text box on a form to show the member's first and last name. Works great! I now want to add it to show if they are a Jr. or a Sr. I thought I knew enough to make it work, but now instead of the name it just shows "-1". Here's the expression in the box...(if possible I'd like to keep it as an expression, since I'm still new to the "behind the scenes stuff" and don't know VBA)
I've recently begun building a database to keep track of stock at work. Nothing particularly special or difficult. I have a little bit of prior experience with Access and VB, but not heaps.
Basically, I've created a tables for parts, companies etc, and am relating all the data together.
At the moment I've made a form that allows you to enter a new part, with Part Number, Description, Category, Supplier, etc.
The complication comes when I want to create an ASSEMBLY of parts. I'd like to create an assembly (which has a lot of similarities to a part, in that it has a part number, description etc), and that assembly needs to store a list of parts that it includes. A simple assembly might include a few items, ie, a bowl of meatballs includes the bowl, a fork, the spaghetti, and 5 meatballs. A more complex assembly (a complete dinner for 5) might include 5 bowls of meatballs (a sub assembly), pepper and salt, 5 glasses and two bottles of coke.
I'm not sure how to best store this assembly data...
I can't really have a table with a finite number of "part" spots because the assemblies get quite large. I'd rather not use an ugly VB macro that stores the PartID's with quantities either, as that could get thoroughly out of hand pretty quickly.
I'm sure there must be a simple method for doing this, but without having a clue as to what it might be called I can't really look for it in help!
I want to have my records in my form show the latest entry, not a completely new form. The user will click on the new record button to create a new record but I want the user to be able to see the last record. Anybody know how to do this?
Hello. I am quite new to Access and even newer to this forum. So please be gentle...
My question is quite simple i think. I want to display one particular record.
I have a keyboard wedge barcode scanner.. so basically a quicker and easier way to input digits or letters into a field. I also have lots and lots of CD's DVD's which i want to track and list the contents of, by simply entering the cd/dvd's barcode number istead of having to insert into my pc and browse manually.. if possible searching within results would be good too.~ think of it as a supermarket style.. input number - output entire contents... there could be hundreds or even thousands of programs or music titles,images, videos or documents.. along with any associated data, (where it is stored, who borrowed it last etc)
Can anbody outline the basics for me to implement this? remember i am quite new to Access and databases in general.
Thanks in advance, and keep up the good work on/in this forum. :)
I have a form "WorksheetList" that has a list of records upon which when one selects a record a new form opens "Worksheet" with the data from "WorksheetList" everything seemed to be working fine then suddenly I get the error "Method 'item' of object 'forms' failed"... Here's my code:
I have a macro in the On No Data event of a report that displays a message when the item number a user requests does not exist in the table being queried.
Now I need to get the same functionality in a form. The form is based on a parameter query with only one criteria [Please enter item number]. The form opens in Edit mode when a valid item number is entered.
I see that there is no On No Data event for either forms or queries, so I'm stumped on how to proceed.
I have a search query that searches for different results based on 3 criterior. I have set up a form so that the user can input the text into the form and then once the Submit button (that i created) is clicked the query table will be shown.
My question is:
Is it possible to have an error message box appear when i click submit and no data is returned by the search query?
I'm hoping for the message box to say "No corresponding records to your search criteria. Do you want to try again?"
Then the options given in the message box are Yes (where they should be taken back to the search form) and No (Where they are taken to another form).
I am setting up a database to hold staff details, and would like a query to show each member of staff's total hours and FTE.
Staff name etc is in tblStaff Staff shift details are in tblShifts linked via staffID
tblShifts will contain details of the shift worked on each day of the week, but the majority of our staff work a standard shift - e.g 8-4, 9-5. Therefore what I wanted to do was in tblStaff set a field named shiftPattern to 1 2 3 or 4. 1 indicating a custom shift, and any other number indicating a set shift defined in a separate table.
The problem I have is that my query only returns people who have details in tblShifts - regardless of their shiftPattern value. If I enter a blank record in tblShifts it will do the above as intended.
I have a table with 715K records. Each record is an inventory product, and the sixth field of each record is a short description. The tenth field is a single-letter category designation, and is currently blank. What I want to do is search through the description field of every line, and where the word "Paint" is contained, enter a letter "P" in the category field.
I am trying to locate a record on a multirecord form by using Findfirst method. Here is the code.
Dim UA1 As String, UAE1 As String, UA2 As String, UAE2 As String, UA3 As String, UAE3 As String, apost as string, repl as string apost = "'" repl = "''" UA1 = Nz(Forms(ParName).Form.NAME, " ") UAE1 = Replace(UA1, apost, repl)
[Code] ....
This code sometimes works and sometimes it does not work. The field CNO is a text field of 5 characters but contains the card numbers that is numeric data or nothing.
I have created a pop-up search form with the search criteria being one unbound field. When I populate the field and click search I want it to search the records and if there is a matching record, I want it to open the data entry form with the complete record showing and available to view/edit/delete. If there is no matching record, I want a message box to appear stating that a record was not found and when you click 'ok' it opens a blank data entry form to complete a new record. I also want it to automatically close the search pop-up form.The following works great... except that the MsgBox pops up even if the record was found.
Private Sub Search_Click() On Error GoTo Err_Search_Click Dim stDocName As String Dim stLinkCriteria As String stDocName = "MgrData"
