Forms :: Move From Last Field In Form To New Record Field On First Page
Aug 27, 2014What is the best way to move from the last field on the last page of a form to a new record field on the first page?
View RepliesWhat is the best way to move from the last field on the last page of a form to a new record field on the first page?
View RepliesAfter I enter data into one field in a record I would like the form to save the record when I move to another field in the same record. It seems that the record is only saved when I exit it entirely. Is there a way to save a record when moving between fields in that record? Can this be done without using an Event Procedure for each field?
View 8 Replies View RelatedI am currently stuck on set focus property. I have a main from with nested subform. I am trying to move the focus from last field of the subform to another field on the main form.
Customers(mfrm)....>Addresses(sfrm)...>Orders(sfrm Add)......>OrdDetails(sfrmOrders)
Now I have a field name [Securedesign] in frmOrderdetails and I want the tab order to navigate to field [CustomerID] in frmAddresses which is a subform to frmCustomers.
I have a form we use for data entry, and not all the fields willhave data in them. When we click the new record button the cursor stays in the field where it was for the last record. We would like the cursor to move to the first field on the form everytime a new record is started.
Can anyone help me out here??
Thanks
Becky
I made a form for use in touch screen app. I would like to make a form button that will act as TAB- move from field to field in the form.
View 4 Replies View RelatedI have a form where I would like to validate (restrict) choices in subsequent fields.
Example
Combobox choices are Air, Fire, Water, Earth, Space
In the form I have 4 fields = Material1, Material2, Material3, Material4. (all in same record on my table)
Basically I need the validation to not allow duplicates across the 4 fields.
something like....
[Material1] <> [Material2] or [Material3]or [Material4]
I am not sure of the proper syntax for the validation field in the Form Properties. Or if I am even putting it in the right place.
How move to next record (without enter) after fill mask in first record in access form?
View 4 Replies View RelatedI have a form containing these fields
trantype,Damount, Camount,Description
And trantype look-up field containing transaction type debit or credit.
Here in this form i want when i select debit transaction type then control move to the Damount and on pressing Enter key Camount skip and control move on Description, and same like this when i choose transaction type Credit then Damount skip away and control move on Camount field and next to description, and access doesn't ask for enter value in Damount.
If I have a field in a tabbed form (the form has pages), can this field be moved from a tab to another programatically?
The form is called "ProjectMain". The field is called "Lenght" and the page (form tab) it is on is "specs1". Sometimes I need to have this field in the page (form tab) "specs2"
I have two subforms on a "Page"/Tabs. Subform #1 is a continuous form which accepts data about dimensions of a pattern piece. The other subform needs to update its information display each time the last control of the first subform loses focus, because it tells me how much material is required for all pieces of this pattern that are entered.
My first feeble attempt at this was to add the following code to the "Lost Focus" event of the final control on the first subform:
Form.Parent.Refresh
This succeeded in forcing the second subform to re-run its calculation.
However, after the recalculation took place, I wasn't able to move to the next record on the first subform. This subform is a continuous form, and I need to be able to add another row of data and then see the second subform change based on the additional information in the first subform.
Obviously I've done this wrong.
I have a form, combo box selection, when i make a selection, all the info is good on all my tabs, which holds the subform.My issue is, on one of the subform, it's a data entry form, where I want it to be on a new record page. instead it list all records. I want my users to see a blank page, but have one field populated. is this possible?
1) blank data entry page, but with a populated field?When a CU Name is selected,I want the (Enter Note) tab to go to a data entry or last page or new page.I have tried putting it to data entry form, but the CU Number will not populate.
I have several different sub-forms that have a button that opens a new form which creates a new record. Each of the different sub-forms have a field value that needs to be passed to the new record when the other form is opened. I've tried a few solutions, but to no avail. Right now I'm using the macro functionality as follows for one of the subforms:
ACTION ARGUMENTS
--------------------------------
RunCommand SaveRecord
OpenForm frmDocumentNew, Form, , [AssociatedClientTracking]=[Forms]![sfrm_ClientTracking]![ID-ClientTracking], , Normal
OnError Next,
GoToRecord ,,New,
MsgBox =[MacroError].[Description], Yes, None,
SetProperty [AssociatedClientTracking], Enabled, Me.ID-ClientTracking
The problem I think is that I'm creating a new record so the value doesn't get passed. The new record is only created after the user begins to enter data in the new form that was opened.
I would like to be able to lock a form's field temporarily until certain information has been added to other fields. Once the required fields are complete, I want to be able to allow the field to be updated.
Here is a simplified version of the table fields (only including relevant fields):
tblContacts
LastName (Text, Required field, Duplicates OK)
FirstName (Text, Required field, Duplicates OK)
CurrentEmployee (Yes/No field)
Basically, I don't want the user to be able to update the CurrentEmployee field in a new record until the LastName and FirstName fields have been completed.
The reason I want to prevent this is that when CurrentEmployee field is updated, the record is then assigned a ContactID number (PK autoID field) which means that my subform is assigned an ID# and the result is messy if the user decides to abort the creation of the record.
In short can I display a field on a form that is not in the forms field list without using a sub-form? I am trying to show a value from a query on this form. I tried this in the control source:
[qry_op500_entry_delta]![countofphone model]
I get an error stating that this is not in my field list for the form.
If the answer is No or if needed I can give more information on what I am trying to do.
I have created a Form based from a Table. On one of the fields, I need to be required inside the Form before moving to the next record of that form. I can not make the required field in the table, because I have to append information day to day.
Also, the required field is a combo box option that is limit to the list.
What kind of Code I can do inside the form of the specific field to make it required before clicking onto the next record. It does not matter if the processor closes out of the form before updating, only if moving to the next record.
This is what the search box must do:
- Searches 3 fields (StudentID, FirstName, LastName) and jumps to the relevant record.
The closer to the search box in the navigation bar below, the better, so this is what I would really like too.
- A repeat click would take me to the next result/record (if any) with the same criteria
- Instant search as soon as I start typing
Access form fields (ID, Name,File_Ref,Mobile,Email, Closed (yes/No)
If Click My Command button at the same auto tick the current record closed filed and duplicate record.
Access 2002 . Can I condition a field to 'locked' on just one record of a continuous form subfile, based on the contents of a 2nd field in same record?
View 14 Replies View RelatedI am building a database where one Form displays records from 14 different tables. For some reason, when I recently try to add a field on to a form from a new table, the ENTIRE form loses the record source, and every single field that is already on the form gets that green dot in the corner with errors surrounding a record source that cannot be found. What am I doing wrong? Am I exceeding some limitations with forms?
View 4 Replies View Relatedin a continuous form i want to click on one record and have the one field change the background colour to highlight it. When I use the code: Field. BackColor = vbYellow it changes the background on all the records. Is there a code to say only for the record with focus?
View 1 Replies View RelatedI wish to change the backcolor of a field on a current record being dispalyed in a 'multiple items' form. However when using me.A.backcolor = makes refrence to all fields called A on the 'multiple items' form and therefore all fields change colour not just the current record.
View 2 Replies View RelatedThe school director is going to input a date (by default today) and a subform will display all of the students who started before that date and haven't been closed as of that date. Next to each name, there will be 4 radio buttons (present, absent, holiday, hospitalized), which by default will be set to present. The director will go down the line, only needing to click when a student isn't present. At the end, she'll push a save button and the new records will be added.
My proposed method:
1. When the textbox with date input is changed, the subform (or just form and I put the textbox in the header?) will populate itself with a query based on student names whose corresponding startdate and enddate work with the inputted date.
2. The subform will be in continuous view so that it kinda looks like a data sheet but it has radio buttons rather than just spreadsheet cells.
3. When the save button is pushed, some visual basic code in the background will look at record 1, grab the student name and selected radio button value, and add a new record to the AttendanceRecords table with the name, attendance type, and date. Then the code will move to the 2nd record, rinse and repeat until it goes through all of them.
Questions/problems:
1. At its core, is this the Access way of doing something like this? Is there a simpler, more efficient, or generally smarter way of doing attendance?
2. How is step 3 going to work? I can look up how to add new records to a table, but I'm not sure how to move around from record to record collecting corresponding data.
3. Since the AttendanceRecord table uses studentID and typeID rather than actual names and actual attendance types, what's the easiest way of adding the new records with that data efficiently? I'm thinking of making the RecordSource of the subform some sort of linked up set of tables such that if I'm looking at record 1 and the name in the textbox on the subform is "Bob" I can just reference studentID in the background without needing anything on the form at all with studentID?
How can I get the value from a field in one table (in the sub form) to copy/insert into a field in another table (in the main form) when adding a new record?The main form and sub form are linked using parent/child linking, and the sub form is in a tab.I have table A (Visit Dates) in the main form which is used to record the date of a visit to a church. Table B (Quarters and Peals) is used to record an event that took place at that church during that visit. Note that not all visits in table A require a record to be created in table B - but half or more do.
In tables A and B I have a field called "QuarterOrPealID" and these are both primary keys, though the field in table B is set to 'no duplicates' and in table A it's set to 'duplicates allowed', as table A has its own auto number/pk. They are both linked in the relationships.
So, when I add a new record to table A using the main form, I might then need to click on the tab in the sub form to create a new record in table B, which has to be linked to the same record in table A. When the "QuarterOrPealID" auto number/pk is generated in the sub form (table B), I need that value to update to the "QuarterOrPealID" field of the main form (table A), so that when I'm viewing these records the form pulls all the information nicely together.
I have my Assets form and the primary key is the ChargerID, in this form I have an "Add New Job For This Asset" button, which opens up the Jobs form at a new record.
How do I make it so that the ChargerID field is automatically filled with whatever the previous record was instead of being blank.
For example if I have Charger12345 open in the Asset form, I'd like to click the Add New Job button and it automatically have Charger12345 in the ChargerID field of the Jobs form.
I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
View 2 Replies View RelatedI am creating a training database and first I have tables in relationship to the courses:
tbl_Courses
Course ID (Primary Key)
Course Title
Objectives
Instructors (lookup field allowing multiple instructors to be selected, meaning they are skilled to teach the course)
tbl_Instructors
Instructor ID (Primary Key
Last Name
First Name
Full Name (Caluclated to put Last Name, First Name)
[code]....
What I am trying to do on a form to create a new event is once the user selects the Course from the Course ID combo box, then I need the Instructor combo box to only display the instructors who are skilled to teach the course which are selected in the tbl_Courses.
I can get all Instructor ID's, but not the names and the class that has multiple instructors show on one line.Should I have not put the Instructors field in the tbl_Courses? Do I need another table for instructor skills or something?