Forms :: Multi-Select Listbox Will Not Clear Selected Lines
Apr 7, 2013
I have a multi select listbox that I rebuild as I index thru some products in another listbox. This listbox then gives me the ingredients I can use. Works well, but the ghost selections in the listbox stay hilighted even after the rebuild.
I can select and de-select at will if there are actual items in the list box, but the ghosts remain.
Here is the code to clear the listbox
Dim _
ctlSource As Control, _
varSelected As Variant, _
intListCount As Integer
Set ctlSource = Forms.frm_select_UPC_LoinGrade!lstBox_ColdStorage
For intListCount = 0 To ctlSource.ListCount
ctlSource.Selected(intListCount) = False
Next intListCount
Forms.frm_select_UPC_LoinGrade.Refresh
Forms.frm_select_UPC_LoinGrade.Repaint
View Replies
ADVERTISEMENT
Jan 30, 2008
All -
For the life of me I can't get the Multiselect Listbox to correctly pass along all of the item selections to a Query which a form is based on.
I've been up and down the forum, and I can't figure out what piece of code to use and how to use it successfully.
I've been able to get a string created using the example posted here (http://www.access-programmers.co.uk/forums/showthread.php?s=&threadid=47909) and it's in the format of "54,67,89,100" etc.
Public Function
Public Function fMultiSelect(ctlRef As ListBox) As Variant
Dim Criteria As String
Dim i As Variant
' Build criteria string from selected items in list box.
Criteria = ""
For Each i In ctlRef.ItemsSelected
If Criteria <> "" Then
Criteria = Criteria & ","
End If
Criteria = Criteria & Format(ctlRef.ItemData(i), "0000000")
Next i
fMultiSelect = Criteria
gMultiSelect = Criteria
End Function
Call:
Call fMultiSelect(Forms!frmPreSPIPComp!lstProjects)
I now need to pass that string to a Query. Once it's been passed to the query, I can open the report based on it.
Essentially I have a button that will perform the string creation, and I would then like to open a report. I want to base the report off of a query and then have the query use Criteria to dwindle down the report.
Am I missing something here?
The long explanation:
I have a single form that allows for the selection of the report. Once the report is selected, certain fields appear that allow for certain criteria to be selected (ie. Class Name, Multi-Select Class Name, Student Names, Multi select Student Names, Dates, etc.)
Once the report has been selected and the criteria set, a user hits a single button that runs the specific report.
Any better ideas of how to set this up. The reports will ultimately be basing their criteria on what the form has in all of it's unbound fields.
I also have a table that specifies the Display Name, actual Report Name for the button to figure out what report to run.
Bottom Line. I want to use a Listbox to filter a report. If I can use a query to base the report off of even better. I don't want to create the SQL in VBA.
Any ideas? Thanks!
View 5 Replies
View Related
Jun 10, 2015
I am using the selections made of the form to generate a query for the user.
I have a CITIES listbox that is populated with values from a stored query.
I would like to make it multi-select and populate a LOCATIONS list box and a NAMES list box based upon the CITIES that are selected.
I have the locations currently populated from a stored query that reads the City selection from the Form. It looks like this
Code:
SELECT DISTINCT (t_location.LOCATION) AS Expr1
FROM t_location INNER JOIN t_asset_master ON t_location.LOCATION_PHY_ID = t_asset_master.LOCATION
WHERE (((t_location.CITY)=[Forms]![MasterQueryGenerator]![CityList]));
I also want multi-select so that is you can un-select all and get the results for all cities.
Here is my half thought approach.
Code:
Private Sub CityList_AfterUpdate()
'Dim LocQryStr As String
'Dim r As Integer
'Dim ctl9 As Control
'LocQryStr = "SELECT DISTINCT (t_location.LOCATION) " & _
[Code] ...
I intended to have the variable LocQryStr as the row source but I abandoned the idea of having multi-select when I saw that .Selected(I) never returned true. Its like the values aren't read in this subroutine.
View 5 Replies
View Related
Jun 15, 2014
I have a multi-select listbox (called PotentialItems) which behaves perfectly unless one of the fields has a null value in it, in which case I get an error 13, "Type mismatch" in the following code. It is valid business-wise for column 9 to be null.
Code:
Dim varItem As Variant
Dim dblTargetPrice As Double
With Me.PotentialItems
For Each varItem In .ItemsSelected
If Not IsNull(varItem) Then
dblTargetPrice = Nz(.Column(9, varItem), 0) '<----- Error here
End If
Next
End With
View 5 Replies
View Related
Jul 1, 2013
I am currently trying to make a form which will generate a report for the users. Currently the form has 3 combo boxes where users select which fields they want displayed from the table in the report. They also have sorting options next to them (Asc or Desc). I am now trying to put in a multi select list box under each combo box to allow users to filter the report to their liking. Currently I am trying to pull distinct values from the specific field of the table and display them in the listbox for users to select.
I have tried using vba to set me.filter1.rowsource = SELECT DISTINCT me.combo1 FROM EVAP_Database, but this doesnt seem to work. I have also tried a few other codes and still no luck.
Table: EVAP Database
Combo: Combo1
Filter Listbox: Filter1
View 6 Replies
View Related
Aug 19, 2005
i have a multiselect listbox in my form.
The multiselectlistbox contains the names of different persons from tblUsers.
it's allready possible to write the id's of the names to another table (tblPresent).
But what I can't manage to do is re-select the values in another multiselect listbox. This multiselectlistbox is located on my editform.
I can display the values using a valuelistbox, but i need to see the non-selected items too..
hope someone can help me out
View 1 Replies
View Related
Oct 24, 2013
I've been using the following code successfully in Access 2003 & now I need to migrate to Access 2010. The purpose of the code is to use the items that the user selects in the list box to build the criteria of a query. Access 2010 keeps giving me a syntax error when I try to run the query & I don't know why:
My code is:
On Error GoTo Err_Command151_Click
' Declare variables
Dim db As DAO.Database
Dim qdf As DAO.QueryDef
Dim varItem As Variant
Dim strCriteria As String
Dim strSQL As String
[Code] .....
The syntax error I get in Access 2010 is:
Syntax Error in query expression 'SELECT * FROM
qryContractListSummarybyDateContract3TYPEBREAK WHERE
qryContractListSummarybyDateContract3TYPEBREAK.Rep ortableName IN('Adbri
Masonry NSW');'
View 12 Replies
View Related
Jul 19, 2005
hello!
i'm trying to select more than one value in a listbox based on a comma-seperated string in a textbox. it seems to be doing what it's supposed to do, except it's only selecting the last value it loops through. it doesn't seem to remember the others. there's probably an easier way to do this than how i did it, but here is the code:
Code:Dim lst As ListBoxDim lngCount As LongDim strSelection As StringDim strNewSelection As StringDim intLen As IntegerDim lngLen As LongstrNewSelection = ""strSelection = Me.Text19.ValueWhile InStr(1, strSelection, ",") <> 0strSelection = Trim(strSelection)lngLen = Len(strSelection)intLen = InStr(1, strSelection, ",")strNewSelection = Left(strSelection, intLen - 1)Set lst = Me!List0lst.RowSource = lst.RowSourceFor lngCount = 0 To lst.ListCount - 1 If lst.Column(0, lngCount) = strNewSelection Then lst.Selected(lngCount) = True Exit For End IfNext lngCount strSelection = Right(strSelection, lngLen - intLen)Wend
any bright ideas???
thanks,
*j
View 3 Replies
View Related
Jul 27, 2006
Dear All,
I am just starting out in Access Development. I have a database that runs a logistics department. This was working fine until the users wanted a little more tweaking.
The report prints out the vehicles with all corresponding drops. This comes out all on sheet.
Is there a way that I can create a form to filter the report via a multi select listbox and print each drop selected on a seperate sheet of paper.
I am using Access 2003
Many thanks for any help or source code given
View 3 Replies
View Related
Jun 25, 2014
I am having a form that has a listbox, which brings up a lot of records, and the user may choose multiple records, but when user wants to scroll down the page to multi select, he cant do it with the ctrl keyboard button, when he press ctrl the page jumps back up, is there any workaround for that?
View 14 Replies
View Related
Nov 26, 2014
I recently have ontained some responsibilies from a coworker who has left the company.
I have frmEdgeReport which uses ratio buttons to populate the
multiselect listbox .. this all works.. now i need to add date ranges and
Everything I do seems to screw up what I already have working..
I have added two textboxes - txtStartDate and txtEndDate.
Currently I am getting error when i put the SELECT statement in its own query that says "Invalid SQL Statement; expected 'DELETE', 'INSERT', 'PROCEDURE', 'SELECT', OR 'UPDATE'."
and when I just run my form I am getting an error that says "Error 3142 - Characters found after end of SQL statement"
this is what i have so far :
Private Sub SetReport()
On Error GoTo Err_Handler
'Purpose: Open the report filtered to the items selected in the list box.
Dim varItem As Variant 'Selected items
Dim strWhere As String 'String to use as WhereCondition
Dim strDescrip As String 'Description of WhereCondition
Dim lngLen As Long 'Length of string
[Code] .....
View 1 Replies
View Related
Feb 6, 2015
I have two listboxes. One for Activities and the other for Organizations.
I set the Org listbox to be multi-select so I could run a loop on that listbox to join multiple Orgs to a single Activity. That part works well.
To do so, I am using the bound column (which is the pkey value) from the multi select listbox, and on the single select listbox I'm using the ListboxName.value to gather the pkey for the "1" side of this 1:Many series of inserts.
Now... I want to use one of the other-than-bound-column value from the multi-select listbox, but I don't know how. When setting a value I only know of the use of :
Code:
ListBoxOrganizations.ItemData(varItem)
and I don't know how to do the equivalent of
Code:
ListBoxOrganizations.ItemData(varItem's column(2).value)
yes, I just made that up, but I hope you get the point. Meaning, as the loop cruises the ItemsSelected on the multiselect I'd like to use other than the bound column when setting variables.
I've tried using the column property to then cruise to the proper record in the listbox, e.g. :
[code]
txtCollaborationDesc = "Collaborate " & ListBoxOrganizations.Column(2, varItem) & " with " & listboxActivities.Column(2)
[code]
But this seems to return the column(2) value of the first record loaded into the list box, as if the varItem piece is being ignored. I believe the loop is working properly, as when the inserts are happening correctly with the bound column of the multi-select list is correctly present as an Fkey in the resulting child records.
I just can't get any other column's value for some reason.
MS Access 2010 and this is an accdb.
View 3 Replies
View Related
Sep 24, 2014
1. I have created a parameter query in access 2010. This parameter is on only one field.
2. I have created a multi-select list box in a form so that users can select one of more items.
I want to pass the selected items as parameters to the save access query.
View 1 Replies
View Related
Oct 10, 2014
I'm using pbauldy's code to filter a report by a multi-select listbox. The only issue is..how do I include more (7 to be exact) listboxes to the code? It seems the OpenReport vba is only allowing 1 where clause?
Code:
Dim strWhere As String
Dim ctl As Control
Dim varItem As Variant
'add selected values to string
Set ctl = Me.VP_ListBox
[Code] .....
View 7 Replies
View Related
Dec 12, 2012
So I have a list box that lists organizations. I recently changed the list box type to extended multi select. On the same form, I have a button that opens a new form where the user can input contacts for each organization. When the list box was not multi select, the expression [forms]![media]!
[List30] made the default value of one of the fields in my contact form the bound column from the selection in the list box. However, now that the list box is multi select, the contact input form does not seem to be able to get the value from the bound column in the list box. When multi select is turned on, is the bound column stored differently.
To even get the contact input button to work, I had to change the code from:
Private Sub Command40_Click()
On Error GoTo Err_Command40_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "Contactsqry"
stLinkCriteria = "[Organization ID]=" & Me.List30
[Code] .....
View 14 Replies
View Related
Aug 22, 2014
I am attempting to filter records using a multi-select listbox, but all records are being returned. Here is my code.
Private Sub btnKeyboxCount_Click()
Dim varItem As Variant
Dim strCriteria As String
Dim strSQL As String
[Code] ....
View 1 Replies
View Related
Mar 2, 2015
I have a form with about 30 controls. I organized it carefully so that all the controls show on a single page. It actually looks really good. However, several of the controls allow multiple values. These appear as a check box showing up beside each item in the list from which these controls take their information. When I run a Filter by Form process, the form flawlessly pulls the data from the table that I'm seeking, and the check boxes are visible, both the ones with checks and without. In a few cases, in order to fit everything onto one page, I have most of the related list hidden, and use scroll bars. This works really well for data entry and for editing individual records.
Where it DOESN'T work like I want it to is in situations where the checked item(s) in the multi-value control don't show up in the box on the form without scrolling. In the table where these multi-value fields actually live, what shows up is just the code for each option, a simple numeral, with commas separating any multiple values. Is there a way to make my form show only the selected codes like in the table? My suspicion is that I'm going to be told no, that the best way to do this is to use a report and query.
View 4 Replies
View Related
Nov 11, 2014
I have an unbound listbox with 3 columns. Call it PeopleBx. How can I address the item in the first row and first column. How can I address the first column in the selected row and how can I address the item in row 3 and column 2. I tried with
Code:
Me.PeopleBx.Selected
and other possible variations but failed.
View 9 Replies
View Related
Aug 26, 2013
I have a form where a user can select from a listbox (pulled from a database) and "Add product" - it then goes into a Textbox, each taking a new line when "Add product" button pressed. Then when they press "Add Customer" those details along with other entered details gets stored in my Customer Database..
The textbox store multi-line entries in the "ProductName" field heading in database.
Is there anyway i can use a List instead of the textbox? Adding individual entries to one certain customer? I have an EDIT facility aswell so would be easier to have a "Remove Product" button instead of manually backspacing a whole product entry from another textbox (containing all products, on new lines).
View 4 Replies
View Related
Jul 24, 2013
How do I remove multiple selected items from listbox.
Noticed it is a table/query listbox, not value list.
Remove selected.zip
View 1 Replies
View Related
Nov 1, 2013
I'm creating an employee audit database, and, in the audit form, the user (ie. supervisor) can select a number of items from a listbox. Each item selected corresponds to an error that the employee has made, and, as such, the employee's Audit Score has two points deducted for each item that is selected.
Incidentally, there are other, solitary elements to the form, but this particular listbox houses a collection of items that are related under a single category.
The score is displayed at the bottom of the form, and it needs to update in real-time.
The problems that I am encountering are that I am unable to count the number of items selected and then I am unable to multiply that count by 2 (the point-value of each item on the list.)
View 2 Replies
View Related
Mar 24, 2014
I have a listbox and whenever I clicked on a row it will highlight black background and white font color. How can I disable this or change the formatting?
View 2 Replies
View Related
Jul 15, 2013
I'm using a sub form to display data form a table. The users wanted it display like a spread sheet. In order to get all the data to display on the same page I am trying to break some of the longer feilds out (i.e. comment field) and display them in a list/text box and not in the table with the smaller fields.
Basically what will happen is when a record is selected in the sub form the comment field tied to each record will be displayed below. I've tried a few things but I keep getting errors displayed in my list/text box (#Name?)
View 14 Replies
View Related
Feb 10, 2014
I've designed access form with one listbox and added 'up' and 'down' buttons to move up and down the selected item in the listbox. i.e from its selected position to one item up when 'up' button clicked and same as one item down when down button is clicked. Any VBA code will do this functionality?
View 7 Replies
View Related
Mar 6, 2013
I have a form which contains a multi select list box of team leaders. Unbound getting source from tl table. Based on one or more selection from user I want to run query that brings up those team leaders. When I have multi select to none in list box and select one to the query works fine. When I change it to simple or expanded it shows nothing. I have query criteria to get data from form list box.
View 1 Replies
View Related
Mar 7, 2013
I'm trying to create a right-click event on a listbox that will copy selected listbox item(s) to a temp table. So far, I've got this code to acknowledge the right click:
Code:
Private Sub List0_MouseDown(Button As Integer, Shift As Integer, X As Single,
Y As Single)
If Button = acRightButton Then
MsgBox "You pressed the right button."
End If
End Sub
Problem is the selected item on the list box doesn't move until after the mouse down event so whatever code I would run would involve the wrong record(s).
I'm using Access 2000 and 2003. How to get the the correct record selected on mouse down, or point me to a working example of right-click functionality on a listbox.
View 4 Replies
View Related
