I've managed to create a multi-user login form with macro.
user1 is able to login with his password and user2 is able to login with his password. latter I noticed that user1 is able to login with any password in the table and use his previous password to login even after changing it.
I am working on a db for a restaurant expense account. I am trying to design a multi-user login form to allow administrator and other users to log in the data entry form. I am a newbie to MS Access.
View 3 Replies View RelatedI am trying to create a multi user login form for my Access 2010 database. I will have 2 different types of users (administrator and staff). The administrator will be able to see all tables and forms and edit/ add to them. The staff will only be able to view a switchboard form and 2 forms (as well as using combo boxes to look up specific records). However, I don't want the staff to be able to view the tables or edit anything.
View 3 Replies View RelatedI need to know the procedure or event code for user login form at opening.
I am working on database which is almost done and i defined tables for users with passwords.
I need to know how i can assign Login Form to be appear on opening of database no other person than listed users should be able to enter or open database without password, to enforce this i made a login form.
I have used Combo box. security_level field is the one that describes their levels and there are only two levels 1 and 2.. I have a table called User (user_ ID, User_Name, Password, Security_Level) On form there is a combo box for user name and text box for password. Two command button where one is for EXIT (Closing the application) and the second button is to run the code.
if the password in table User matches value chosen in combo box or user name and password are correct Then it should check if Security_Level of the user is equal to 1 to displays a form called Admin and when the Security_Level of the user is equal to 2 to display a form called user1.All that I want is to have a login that has two user and each user when login opens his/her own form which is different from the other user.
I changed the name of a form referenced in the Autoexec macro from "frmLogin" to "frmLoginPW". However when I Open Access 2010 instead of Form "frmLoginPw" opening I get a message box saying that the system can't find "frmLogin". If I do a search through all the code in the project there is NO reference to "frmLogin" as I changed any code to refer to "frmLoginPW" and recompiled the project.
I can not get rid of this error and if I press the OK button on this error message ( from MS Access not my error coding) the "frmLoginPw" opens and the code in the form works. (Password authentication etc etc.). I deleted the AutoExec macro and remade the macro and referred it to the new form "frmLoginPW", this did not work. I loaded the Accdb file using the Run command and the /Decompile command line parameter to no effect.
I have access 2010, I currently have a database in place and operational. What I am wondering is there a way to have a form come up whenever someone opens access and asks for a password and login name. Also I would like to have a 2 tier system. One for Admins and the other for users with limited access.
Is this even possible to accomplish?
I have created a login form, with a user name and password. It works great. However I need to use the login form for three different command buttons, on my main access form. The same login form will be used but It will need to open three different forms depending on what command button was selected on the main page.
Main page- PID
3 command buttons- building, documents, assessments
login form- login
3 documents- build, docs,assess
I open main page, PID- click on buildings the login form pops up and I enter the correct username and password the building doc opens. Got it?? The same process for each, I would like to know how is this possible? How do I change the differnt documet that opends according to the command button that has been pushed? :confused: Thanks in advance
hey,
can ne1 tell me how to create a User Login form in Access??? i want disply this form 1st, when i open the bd???? i am very new to Access. :)
thanks :) :)
I would like to put a text box (user) and checkbox (check100) on a form, that when the checkbox is not checked the value in Gender switches. In an AfterUpdate I would use a code to capture the user login.
Code:
Private Sub Check100_AfterUpdate()
Me.User = Environ("UserName")
If Me.check100 = 0 AND Me.Gender.Value = "Male" THEN
Me.Gender.Value = "Female"
ElseIf Me.check100 = 0 AND Me.Gender.Value = "Female" Then
Me.Gender.Value = "male"
End If
End Sub
Was trying to set the value of text to current date and time when a submit button is clicked. I've managed to set
Control Name:- txtLastLogin
Property:- Value
Value:- now()
The above expression works but the last logged data in tblEmployee gets replaced as another user logs in.
How can i add a time stamp to each user loged in.
Into the form named: Administratorsfrm, I added a textbox defined as usertxt and also a textbox named passwordtxt as well as a button named logincmd.
The user defined is the Network user and this is added automatically to the usertxt field everytime when I open the Administratorsfrm form. To do this I use the next code:
Private Sub Form_Open(Cancel As Integer)
Dim wshNetwork As Object 'New wshNetwork
Set wshNetwork = CreateObject("WScript.Network")
Me.Usertxt = wshNetwork.UserName
Set wshNetwork = Nothing
End Sub
I would like that the user types his/her password (Network password or Unlocking computer) and after this could Login to the database application. I mean, the user will type his password and then the event should compare the password typed with the network password or unlocking password and if this is correct should open the database application (Main Menu Form: Mainfrm)
I have made a very simple log on form that requires the user to type in a user name and password. The user name and passwords are stored in a table. New users are added to this table to allow access to the database.
Is there a way I can add a counter to see how many times a particular user has logged onto the database?
Is there a way to make the password expire every 365 days requiring the user to reactivate their account and log in details.
I am in the process of creating a database with multiple tables. Multiple users access through network with access data back end on server and Different Forms with user and group access of MS Access. The file is in mdb format and current version of MS Access used by all my users is Access 2007.
Requirements :
1. User Login (Access user login preferred as, one can set permission for read only, write permission for specific field etc.) But whether if any user who has readonly rights create his own db, wont be able to edit their own because of the rights that i have set rights in their pc??
2. need to fetch this user id with time stamp in each table to find who has altered the data, though audit trail table with ip address will be ideal.
3. Hide the navigation pane and ribbon for anyone other than administrator, including office button.
4. User level security is it required to set in every pc where the front end sits or one pc where the data is located.
I have a database where multiple users log in and work in 1 of 2 different forms. The 1st form in for initial data entry where users enter data then senter there initials and save each record. the other form is for QC'ing data that has been entered and they will add additional data to the form, then enter their initials and save the record.
How can I make it so that I can have a user once they log in to the database, it will autofill their initials? I have used a dropdown box before but it is not useful for people who have the same first name initial or worst, the same first and second initial because they end up selecting the wrong initials.
I do not currently have it set up where I have a login screen, I just have only forms visible to users when they enter data. Any easiest way to go about making this happen (I am just trying to shorten the amount of data entry that gets done).
I have recently started a project and become stuck already. I have a login form created that works (code below). What i want to do is allow access to the users of 1-7 in table (level of access) which will determine which page they view after logging in. IE if the have Access in table "Users" as "1" then when they log in the will see a form thats called L1. Same with 2,3,4,5,6 & 7.
Code:
Private Sub LoginButton_Click()
If IsNull(Me.LoginUsernameText) Then
MsgBox "Please Enter Username", vbInformation, "Username Required"
[Code].....
how i can get a current user from a custom login form CurrentUser() this function always return a system user name admin as default. In my login schema i have a Hidden splash form that have a unbound field that holds user name from custom login form after login a dashboard execute and also display user name on dashboard according to user login ,this working fine for mine. Actually i want to make a currentuser stamp in every entry when a record is entered in database.
View 1 Replies View RelatedI have been trying to create a login form that allows the user to change his/her temporary password logging it to the proper table along with timestamp and who done it info.But, after spending the morning trying to find the proper syntax I am flummoxed.
I can get everything to work accept the update of the fields. I can get the command to work (writes to the location) but it does the pop-up what is the parameter thing when it works. I have all the information just need to get it in so the command recognizes it.
DoCmd.SetWarnings False
DoCmd.RunSQL "UPDATE lut_TeamList SET Pass = txt_Password.value WHERE TeamListID = Me.cbo_UserName.Value"
DoCmd.RunSQL "UPDATE lut_TeamList SET UpdatedBy = Me.cbo_UserName.Value WHERE TeamListID = Me.cbo_UserName.Value"
DoCmd.RunSQL "UPDATE lut_TeamList SET UpdatedWhen = Now() WHERE TeamListID = Me.cbo_UserName.Value
DoCmd.SetWarnings True
DMax multi user.I don't get a PO number and when I click on my subform I can't change the values because it says I need to add multi user.Also code that Chris O and RainLover had references additional fields which I don't have. I only have the one field that needs updating.I have PONumber textbox and tbl.Purchase with the field PO..Here's the code I used.
Private Sub PONumber_AfterUpdate()
If (conHandleErrors) Then On Error GoTo ErrorHandler
' If we have some data
If Len(Me!PONumber) Then
[code]....
I am developing a small database for use in a multi-user environment: I have split the tables off and am testing with two copies of the front-end on different machines. All seems to work well except on one form.
On this form, the value of a bound control (exposed as a number of radio buttons) is used to make related controls on the form visible or invisible. I use the AfterUpdate event to trigger appropriate VBA code to accomplish this; it works well.
However if two users have the same form open at the same record (unlikely, but not impossible), and User A changes the value of the control via the radio buttons, Access will eventually propagate the change to User B's copy of the form but the AfterUpdate event will not be triggered and the form becomes inconsistent. I understand that events are only triggered when a user makes a change to a control; how can I be alerted when Access makes a change?
i am currently developing a database what i need to do is to restrict user to view selected record and change them. i have build a login form in which i have two areas as a user name in combobox and a password text box. i have another form in which i have a combo box named area what i need to do is to limit the area combo based on the selection of the user login form previously. for example if a user select LAS VEGAS in user combo and enters its password after clicking the button login the another form appears in which thier respective stores and sales are saved, their is a combo box named area in which i want to limit it by LAS VEGAS i mean it would only show LAS VEGAS in drop down based on the previous selection in login form.
View 4 Replies View RelatedI have multiple users entering data on bound forms. I have three required fields, all in the first 3 fields of the form. My question is, can I program something to where Access will update the record, after the 3rd required field, so that other users are not having to wait to enter there new record?
View 1 Replies View RelatedI have multiple users entering data on bound forms. I have three required fields, all in the first 3 fields of the form. My question is, can I program something to where Access will update the record, after the 3rd required field, so that other users are not having to wait to enter there new record?
View 14 Replies View RelatedI have a form "log_file" that I am going to be placing a nework. All I have done is create a new DB, create a table, and create a form. Now I want to make it so users open up the DB file and only see the form and cannot access/edit the table. Basically, It is okay if they go back and forth through the records and change those, but I don't want them to be able to edit the form either.
I'm just not sure where to go from here. If there is more info I should provide please let me know.
Thanks in advance.
Started a new thread: Rebuilt database and still working with auto number for multi user form. The code I have works for single user but not multi user. Also if someone opens the form and closes without adding anything to the form the number is used with blank record.
This is what I have thus far:
Private Sub Form_Current() Me.[PO] = Nz(DMax("[PO]", "tblPurchaseOrder"), 0) + 1
End Sub
Hi guys,
I've seen different log in forms and tips on multi-user use but can't seem to find info on the following...
We have 6 people at work and I'd like to assign which user updated a form or created a new record...this would be particularly useful on the sales part of the database to track who made a call to a particular customer...
Best ideas anyone?
dazza61