Forms :: Multiple DLookup Syntax

Feb 24, 2015

Me.txtversion = "Ver:" & " " & DLookup("[txtVersionMajor] & " - " & [txtVersionMinor] & " - " & [txtVersionRevision]", "tblVersionInfo")

What's wrong with my syntax ? It's the "-" part that is the problem.

View Replies


ADVERTISEMENT

Queries :: DLookup - Combine Multiple Criteria Syntax In Query

Apr 17, 2013

I am trying to create a Dlookup in Access 2010 within a query using query wizard. I want to lookup the tax rate for an employee based on a salary range and their 'tax category' (string). Through troubleshooting I can get the criteria to work separately.

These are: DLookUp("Base","TABWT","[TABWT].[Taxclass] = '" & [FirstOfTaxGroup] & "'")

DLookUp("Base","TABWT",[grosspay] & " Between [TABWT]![Minimum] And [TABWT]![MaxBracket]")

These work and return the correct values for each column/row when I run the query.

However, when I combine the criteria (using the build wizard) as follows:

Expr1: DLookUp("Base","TABWT","[TABWT].[Taxclass] = '" & [FirstOfTaxGroup] & "'" and [grosspay] & " Between [TABWT]![Minimum] And [TABWT]![MaxBracket]")

The Dlookup will returns 0 values but will not give an error message.

I've tried quite a few variations on syntax and quotes and so on. However, it's just not working for me.

View 3 Replies View Related

Forms :: Date Field Syntax For DLookup

Apr 11, 2014

I have table [table1] which have 4 fields

EMPID - primary key
EMPFirstname
EMPLastname
EMPDOB

Input box as txtempid as string

I am trying to learn how I to display other field based on one field in my case last three field based on EMPID

I am actually getting syntax error when I dry to display DATE Field

Following are my attempts

Dim Verfirstname as string
Dim Verlastname as string
Dim VerDOB as date

Verfirstname = dlookup("[EMPfirstname]","table1","[EMPID]='" & me.txtempid & "'")
Msgbox Verfirstname

works fine. But when I use for Date, I am getting syntax error

VerDOB = dlookup("[EMPDOB]","table1","[EMPID]='" & me.txtempid & "'")
Msgbox VerDOB ---- now I am getting syntax error

I tried to understand over net and I believe i need to used with "#" before and after the date field but my criteria...

View 1 Replies View Related

How To Use DLookup Syntax

Feb 20, 2014

I need to use a dlookup on a report to look up fields on another query, other than what the report uses.

How do i use the dlookup syntax?

I have a field on another query called "Average" and the query name is AverageResults. The report is called Totals.

View 9 Replies View Related

DLookUp Syntax Error Help

Mar 26, 2008

Hello,

I have a table called "ShrinkWrapBinding" where I am supposed to look up a "Price" from. As you see in the code below, I calculate a "totalPackages" number which comes from values in a form. My problem is that when I try to use this value (totalPackages) on the DLookUp function (as seen in this code) it gives me a syntax error exactly on the totalPackages variable. Please note that I added single quotes to the 'totalPackages' variable when I use it on the DLookUp function, and have tried every possible combination (single quotes, double quotes) but still doesn't work. What is it that I'm doing wrong?

Code:
Dim totalPackages As Integer
Dim tempPrice As Double

totalPackages = Me.QuantityBooks1 / Me.ShrinkWrapQty

tempPrice = DLookup("[ShrinkWrapBinding]! [Price]", "ShrinkWrapBinding", "'totalPackages' >= [ShrinkWrapBinding]![RangeField]")


Thank you

View 8 Replies View Related

Syntax For Dlookup In Table

Jul 1, 2007

Hi all, instead of doing a dlookup via a query, i'd like to do a dlookup for price direct in a table where the criteria is the value in Text1 from Form1

outt = Nz(DLookup("[Price]", "Table1")) Where Product = ' Text1' from Form1

Whats the correct syntax for this please? Thanks

View 2 Replies View Related

DLookup Syntax Problem

Jun 7, 2006

I am trying to implement DLookup for the following sql to a linked SQL Server table to verify that the currentuser is in my Traders table:

select tr_username from Traders where tr_username='edobbie'

When I enter the following DLookup command I get the error 'compile error expected ='

The offending line is:

DLookup("tr_username","Traders","[tr_username] = " &CurrentUser())

The Editor doesn't seem to see the = sign in my criteria. I've modified the syntax a number of ways to no avail.

Does anyone see the problem?

View 2 Replies View Related

Modules & VBA :: LIKE In DLookup After Syntax

Nov 5, 2013

I am looking to use a "If" statement with DLookup to find a record and see if the field name begins with "TW" as the characters. Here is what I have so far:

Code:

Dim matchCriteria As String
matchCriteria = "LIKE 'TW*'"
If DLookup("end_user", "tbl_module_repairs", "prikey = " & Me.txt_rid1.Value) = matchCriteria Then
MsgBox "Success"
Else
MsgBox "FAILURE"
End If

I am trying to switch between two sets of pricing for customers that begin with "TW" and then all else. Would the use of a "case" statement be better? If so I do not have the "end_user" bound to the form so I would need to embed Dlookup in the "case" method.

View 5 Replies View Related

Syntax Error In My Dlookup Inside Qry

Dec 22, 2007

I wonder if you can help me. In my query, for this calculated field, i get an error message about a syntax error missing operator in query expression.
what did i do wrong? thanks

FormulaID is a text field.

UnitRM Combined: nz(DLookUp("UnitRM Combined","QryFormulaSummed","[QryFormulaSummed].[FormulaID]='" & tblCostJunction.FormulaID & "'"))

View 5 Replies View Related

DLookup Syntax Problem In Report

Jan 3, 2007

I have a report that when run, prompts a user for an id. The user enters and id and it pulls the information based on that id. The information is being pulled from data stored in Table A. I also have Table B that associates an id with a name. In my report I have the input being stored as a string, called strCampusId. I have a text box with called txtCampusMinistryName. I want the report to do a lookup based on the users input and display the CampusId Name, however I am getting an error. The error says, RunTime Error 3075, Syntax error (missing operator) in query expression 'ParishId=*0101'.


Table B (called CampusMinistry) only has 2 columns, ParishId and ParishName

Here is my code that I am trying to use.

txtCampusMinistryName = DLookup("ParishName", "CampusMinistry", "ParishId=" & strCampusId)

Thanks for any and all help.

View 2 Replies View Related

Modules & VBA :: Syntax With Filter In DLookup

Feb 26, 2014

If I type 2014 instead of b everything works out.

Code:

Dim a As Double
Dim b As String
b = Right(RepMonth, 4)
a = DLookup("[EUR/TRY]", "Plan_FX_RATES", "YEAR = '" & b & "'")
Debug.Print a
Debug.Print b
Debug.Print RepMonth

View 4 Replies View Related

Forms :: DLookup Multiple Criteria Function

Jan 31, 2015

I can't seem to get past this expression/criteria problem.

[Actual] is my field I want to grab data from
[L3-4-5] is my main table
[CDATE] is a form control where the user enters a date
[Quarter] is a number field and want it to equal 1
[Partname] is a text field and string it to equal 1

My current expression is:

=DLookUp("ACTUAL","L3-4-5","ID=" & [CDATE] And "[QUARTER]=1" And "[PARTNAME]='1'")

Although my other expression on another form works.In my if code statement I have

Me.DAYS_TRAINED.Value = DLookup("Days", "TRAINED LH A-PILLAR", "ID=" & FTM_NAME)

So I think I don't understand the multiple criteria part.

View 3 Replies View Related

Forms :: Multiple Criteria In DLookup Command

Nov 15, 2013

I have a form with combo box named "TEXT17" i have an another text box named(Basic Pay). How can I use dlookup creteria with two condition

EMPID= text17 value and
month in lbl9 value="mar"

I also paste my code here but show error

Me.Text43 = DLookup("Basicpay", "Salaryall", "[EMPID]='" & Me.Text17 & "'" And "[Month]='" & "Mar")

View 6 Replies View Related

Forms :: DLookup With Multiple Criteria With Label Caption Or Combo Box Column

Aug 14, 2015

I want to result as dlookup function in access 2007, when I use dlookup like this

=DLookUp("GPFDed","[SalaryAll]","[EMPID]='" & ![Cmb_EMPID] & "' And [SalMonth]='" & "Jan" & "' And [Salyear]='" & [me]![Label17].[Caption] & "'")

it gives #Name?

What is the problem and how can i change the label caption to Combo box column 2 value...

View 1 Replies View Related

Forms :: DLookup Show Results Values In Textbox On Its Own Line Multiple Columns

Mar 26, 2014

Access 2010 - I would like to use DLookup to show results values from a table and display in a unbound textbox on a form. the results from each column in the table need to be on seperate lines, a break if you may. Here is the code I have so far.

Code: txtKeywords = DLookup("colKeyword", "tblKEYWORDS", "cboCategory = '" & txtcategories & "'")

In colKeyword Column In tblKEYWORDS table match what i select in cboCategory Combo drop down box and populate txtcategories textbox on form

What I would like to do is show All colKeyword results in textbox [txtcategories] and display each result on its own line!

example

entry1
entry2
entry3
entry4

View 7 Replies View Related

Modules & VBA :: Syntax On Multiple Criteria In Where Statement

Dec 10, 2014

I need to get this syntax right. I have something similar that worked before to open a report but now I am using the same code structure on opening a form and I can't get it.

[prikey] is an autonumber and that has given me trouble before with the syntax. [EstimateFlagCleared] and [WarrantyFlagCleared] are Yes/No fields.

Dim maxFlag As String
Dim flagCriteriaWarranty As String
Dim flagCriteriaEstimate As String

[Code] .....

View 13 Replies View Related

Using DLookup With Multiple Criteria

Apr 8, 2013

I am using MS Access 2010 and have an issue with one of my forms. First off, I have a table called coefficient which contains a column MIN, a column MAX, and a column COEFF.In my form, called CALC, I want to grab a number that it is in textbox [Text12] and place the related coefficient number in textbox [Text15].I placed a control source in [Text15] using =DLookup("[COEFF]","coefficient","[Text12]>[MIN] And [Text12]<[MAX]").

View 2 Replies View Related

Reports :: DLookup With Multiple Criteria

Apr 11, 2013

creating a DLookup expression for an unbound control on a report. This report displays data collected from the users from a table called tblaudit completed. This table contains (among others) three fields labeled below

Brand
Form
Area Changed

I also have another reference table labeled refevalareas. The fields in this table are as follows

BrandName
FormName
AreaName
PointValue

I would like to create an unbound control on my report that "prints" the point value depending on the Brand, Form, and Area displayed for each record. Though the field names are different the data collected and displayed in each table is consistent. I haven't worked much with Lookups and the logic is challenging for me to grasp but I think I have the basic idea which is shown below..

DLookup( refevalareas.[PointValue], refevalareas, ("[BrandName] = '" & Reports!rptqryauditcompleted![Brand] = "'") & ("[FormName] = '" & Reports!rptqryauditcompleted![Form] = "'") & ("[AreaName] = '" & Reports!rptqryauditcompleted![Area] = "'")

View 4 Replies View Related

Modules & VBA :: Dlookup With Multiple Condition

Apr 8, 2015

I Have one main form in access 2003 i want to use Dlookup function to 1 text box with 2 criteria is it possible?

My Formula:

Text67. Value = DLookup("Balance", "dbo_WbookEdit", "[Lotno] = '" & Forms![Edit]![LotNo] & "'" And " & [Description] = '" & Forms![Edit]![Description] & "'")

View 6 Replies View Related

Reports :: Dlookup Multiple Criteria

Mar 11, 2015

I have a database which I have been using for over a year now which includes a Dlookup formula in a report.The dlookup references the query QRYDwgCount and looks up the number of drawings issued by a particular architect. I have been using the following formula which was previously working

="Total drawing count for " & [IssuedBy] & " = " & DLookUp("CountOfDrawingNo","QRYDwgCount","IssuedBy = '" & [IssuedBy] & "'").

The problem I have now encountered is a new job with an architect that worked on another job already in the database. Instead of bringing forward the number of drawings issued by the architect for this current job, the formula is showing the number of drawings issued for the earlier job. I therefore need to add "ContractName" = [ContractName] but I am getting either Error or an incorrect answer as the result.This is what I have written:

="Total drawing count for " & [IssuedBy] & " = " & DLookUp("CountOfDrawingNo","QRYDwgCount","IssuedBy = '" & [IssuedBy] & "'" And "ContractName='" & [ContractName] & "'")

View 7 Replies View Related

General :: Dlookup Default Value With Multiple Criteria

Aug 6, 2014

I have a form with multiple combo boxes. Once the combo boxes are populated, I need the text box to look up the value in the query based on two combo box selections.I am attempting to do a DLOOKUP, but I am obviously not doing it correctly because the result is #NAME?.

Here is what I have done: In Default Value section of the txtONE property sheet: =DLookUp([fieldTHREE],[qryMAIN],[cmbONE].[AfterUpdate] And [cmbTWO].[AfterUpdate])

View 4 Replies View Related

Queries :: Multiple Criteria In DLookup Query

Apr 23, 2013

I've been asked to get involved in some access development but don't seem to be get my dlookup syntax correct.I essentially want to lookup what salary band different employees are in.I have two tables:

Employee Table) has the fields: Name, Type, Salary

Salary Band Table) has the fields Employee Type, Salary Band, Lower range, Upper range..my query syntax is:

Code:

Band: DLookUp("[Salary Band]","Salary Band Table", [Salary] & " BETWEEN [Lower range] and [Upper range]" & "AND " & [Type] & " = [Employee Type]")

I can get the first criteria to work but can't get the second part to work - currently it produces an error.

View 1 Replies View Related

Reports :: DLookup With Multiple Criteria That May Change

Jan 5, 2015

I have a table named z_ResltsSampleCountMonthly. In that table I have fields SampleSize, Month and LOB.

I have a report that I need to use a Dlookup in order to pull the SampleSize by LOB into my report. However, my report has three columns that change based on the start and end dates for the report. It shows current month plus the two prior months to show a trend.

So I have each column heading update automatically based on the dates the user enters into the start and end date on the main menu form.

If they select 12/1/14 to 12/31/14 the three columns heading would update to October 2014, November 2014, and December 2014. In the table I have the data for all three months so when I use this formula it works but it's putting September 2014 data under October 2014 so I need to have multiple criteria; one being the LOB and the other being the column heading which is equal to the field Month in the table.

Code:
=DLookUp("[SampleSize]","z_ResultsSampleCountMonthly","[LOB] = ""CMES""")

This is what I tried to do to add the second criteria to pull based on text59 being equal to the Month field in the table but it's not working:

Code:
=DLookUp("[SampleSize]","z_ResultsSampleCountMonthly","[LOB] ="CMES" And [Month] = ' " & [Text59] & " ' ")

View 2 Replies View Related

General :: DLookup With 3 Multiple Numeric Criteria

May 10, 2015

I have this payroll system:JJAEPAYROLL.accdb

In the "qryEmployeeWTax" i need to Lookup the [InitialTax] from the "qryreftbl_WTAX" based from the [ETPES] and [SalaryAfterStatutoryDeductions], so i am using this function:

Code:
InitialTax: DLookUp("[InitialTax]","qryreftbl_WTAX","[ETPES]=" & [ETPES] & "AND [ValueRangeStart]<=" & [SalaryAfterStatutoryDeductions] & "AND [ValueRangeEnd]<" & [SalaryAfterStatutoryDeductions])

But it doesn't work

I am able to use DLookup successfully using 2 criteria s in my "qryEmployeesStatutoryInfo"

View 14 Replies View Related

Modules & VBA :: Multiple Criteria To Return Value - DLookup Error

Feb 11, 2014

I have been trying to find a solution to why I can't get a Dlookup with multiple criteria to return the value I need.

Essentially I am trying to use an Order Number to find the item number which is contained within another table. However the order number has multiple lines (suffixes) which alter the item number. Therefore I am trying to have the item number be populated by the correct 'combination' of Order Number and line ("suffix").

I have managed to use the Dlookup in the after update of each box of the form separately and they retrieve values in the table correctly:

Afterupdate of main order number:

Code:

Private Sub OrderNumbertxt_AfterUpdate()
ItemNumbertxt = DLookup("item", "dbo_job", "[job] = '" & Forms![**INPUT]![OrderNumbertxt] & "'")
End Sub

Afterupdate of suffix:

Code:

Private Sub SuffixTxt_AfterUpdate()
ItemNumbertxt = DLookup("item", "dbo_job", "[suffix] = Forms![**INPUT]![SuffixTxt]")
End Sub

However when I combine them as follows in the afterupdate of the Suffix box I receive a "Run-time error '13': Type mismatch"

Code:

Private Sub SuffixTxt_AfterUpdate()
ItemNumbertxt = DLookup("item", "dbo_job", ("[suffix] = Forms![**INPUT]![SuffixTxt]") And ("[job] = '" & Forms![**INPUT]![OrderNumbertxt] & "'"))
End Sub

I think the reason is something to do with some being numbers and some being a combination of text and numbers (based on the replies of other topics), but have been trying to modify these slightly and can't get it to work still.

Also the Order Number is a combination of letters and numbers (normally in the form of AB12345678), the suffix is just a number between 0-9 and the Item number it finds is a combination of numbers and letters.

View 3 Replies View Related

Modules & VBA :: Dlookup With Multiple Criteria - Count Of Callbacks For Day And Time

May 2, 2014

I have this

Code:
If Not IsNull(strCount = DLookup("[Number_Of_Records]", "All_Booked_Callbacks ", "[CallBack_Date] =#" & Me.CB_DAte.Value & "#" _
& " And [CallBack_Time] = #" & Me.CB_Time.Value & "#")) Then strCount = DLookup("[Number_Of_Records]", "All_Booked_Callbacks ", "[CallBack_Date] =#" & Me.CB_DAte.Value & "#" _
& " And [CallBack_Time] = #" & Me.CB_Time.Value & "#") Else strCount = "0"

All_Booked_Callbacks is a query which has a date and time columns and count of callbacks for that day and time, this always returns 0

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved