I can't seem to get past this expression/criteria problem.
[Actual] is my field I want to grab data from [L3-4-5] is my main table [CDATE] is a form control where the user enters a date [Quarter] is a number field and want it to equal 1 [Partname] is a text field and string it to equal 1
My current expression is:
=DLookUp("ACTUAL","L3-4-5","ID=" & [CDATE] And "[QUARTER]=1" And "[PARTNAME]='1'")
Although my other expression on another form works.In my if code statement I have
I am using MS Access 2010 and have an issue with one of my forms. First off, I have a table called coefficient which contains a column MIN, a column MAX, and a column COEFF.In my form, called CALC, I want to grab a number that it is in textbox [Text12] and place the related coefficient number in textbox [Text15].I placed a control source in [Text15] using =DLookup("[COEFF]","coefficient","[Text12]>[MIN] And [Text12]<[MAX]").
creating a DLookup expression for an unbound control on a report. This report displays data collected from the users from a table called tblaudit completed. This table contains (among others) three fields labeled below
Brand Form Area Changed
I also have another reference table labeled refevalareas. The fields in this table are as follows
BrandName FormName AreaName PointValue
I would like to create an unbound control on my report that "prints" the point value depending on the Brand, Form, and Area displayed for each record. Though the field names are different the data collected and displayed in each table is consistent. I haven't worked much with Lookups and the logic is challenging for me to grasp but I think I have the basic idea which is shown below..
I have a database which I have been using for over a year now which includes a Dlookup formula in a report.The dlookup references the query QRYDwgCount and looks up the number of drawings issued by a particular architect. I have been using the following formula which was previously working
The problem I have now encountered is a new job with an architect that worked on another job already in the database. Instead of bringing forward the number of drawings issued by the architect for this current job, the formula is showing the number of drawings issued for the earlier job. I therefore need to add "ContractName" = [ContractName] but I am getting either Error or an incorrect answer as the result.This is what I have written:
I have a form with multiple combo boxes. Once the combo boxes are populated, I need the text box to look up the value in the query based on two combo box selections.I am attempting to do a DLOOKUP, but I am obviously not doing it correctly because the result is #NAME?.
Here is what I have done: In Default Value section of the txtONE property sheet: =DLookUp([fieldTHREE],[qryMAIN],[cmbONE].[AfterUpdate] And [cmbTWO].[AfterUpdate])
I've been asked to get involved in some access development but don't seem to be get my dlookup syntax correct.I essentially want to lookup what salary band different employees are in.I have two tables:
Employee Table) has the fields: Name, Type, Salary
Salary Band Table) has the fields Employee Type, Salary Band, Lower range, Upper range..my query syntax is:
Code:
Band: DLookUp("[Salary Band]","Salary Band Table", [Salary] & " BETWEEN [Lower range] and [Upper range]" & "AND " & [Type] & " = [Employee Type]")
I can get the first criteria to work but can't get the second part to work - currently it produces an error.
I have a table named z_ResltsSampleCountMonthly. In that table I have fields SampleSize, Month and LOB.
I have a report that I need to use a Dlookup in order to pull the SampleSize by LOB into my report. However, my report has three columns that change based on the start and end dates for the report. It shows current month plus the two prior months to show a trend.
So I have each column heading update automatically based on the dates the user enters into the start and end date on the main menu form.
If they select 12/1/14 to 12/31/14 the three columns heading would update to October 2014, November 2014, and December 2014. In the table I have the data for all three months so when I use this formula it works but it's putting September 2014 data under October 2014 so I need to have multiple criteria; one being the LOB and the other being the column heading which is equal to the field Month in the table.
In the "qryEmployeeWTax" i need to Lookup the [InitialTax] from the "qryreftbl_WTAX" based from the [ETPES] and [SalaryAfterStatutoryDeductions], so i am using this function:
I have been trying to find a solution to why I can't get a Dlookup with multiple criteria to return the value I need.
Essentially I am trying to use an Order Number to find the item number which is contained within another table. However the order number has multiple lines (suffixes) which alter the item number. Therefore I am trying to have the item number be populated by the correct 'combination' of Order Number and line ("suffix").
I have managed to use the Dlookup in the after update of each box of the form separately and they retrieve values in the table correctly:
Afterupdate of main order number:
Code:
Private Sub OrderNumbertxt_AfterUpdate() ItemNumbertxt = DLookup("item", "dbo_job", "[job] = '" & Forms![**INPUT]![OrderNumbertxt] & "'") End Sub
Afterupdate of suffix:
Code:
Private Sub SuffixTxt_AfterUpdate() ItemNumbertxt = DLookup("item", "dbo_job", "[suffix] = Forms![**INPUT]![SuffixTxt]") End Sub
However when I combine them as follows in the afterupdate of the Suffix box I receive a "Run-time error '13': Type mismatch"
Code:
Private Sub SuffixTxt_AfterUpdate() ItemNumbertxt = DLookup("item", "dbo_job", ("[suffix] = Forms![**INPUT]![SuffixTxt]") And ("[job] = '" & Forms![**INPUT]![OrderNumbertxt] & "'")) End Sub
I think the reason is something to do with some being numbers and some being a combination of text and numbers (based on the replies of other topics), but have been trying to modify these slightly and can't get it to work still.
Also the Order Number is a combination of letters and numbers (normally in the form of AB12345678), the suffix is just a number between 0-9 and the Item number it finds is a combination of numbers and letters.
I am trying to create a Dlookup in Access 2010 within a query using query wizard. I want to lookup the tax rate for an employee based on a salary range and their 'tax category' (string). Through troubleshooting I can get the criteria to work separately.
These are: DLookUp("Base","TABWT","[TABWT].[Taxclass] = '" & [FirstOfTaxGroup] & "'")
DLookUp("Base","TABWT",[grosspay] & " Between [TABWT]![Minimum] And [TABWT]![MaxBracket]")
These work and return the correct values for each column/row when I run the query.
However, when I combine the criteria (using the build wizard) as follows:
Expr1: DLookUp("Base","TABWT","[TABWT].[Taxclass] = '" & [FirstOfTaxGroup] & "'" and [grosspay] & " Between [TABWT]![Minimum] And [TABWT]![MaxBracket]")
The Dlookup will returns 0 values but will not give an error message.
I've tried quite a few variations on syntax and quotes and so on. However, it's just not working for me.
I've never used DLookup before and I can't get it to work for me so far.
I have 1 table which contains products and different properties of each product, such as the weight of the product.
I have created a query which sums the weight of all products, but only for those that have a value >0 in a certain field. This all works fine.
Now I simply want to display that calculated total weight in a text box on a form. So I thought DLookup could be used for that. But I can't get it to work, maybe because I'm not putting in any criteria? In the control source of the text box I've put the following:
=dlookup("[TotalWeight]","qryTotals")
I don't have any criteria, I just want the value from my qry expression. The textbox on my form now displays #name?
So I'm working on something for housing. Each house has a "Property Reference". This property reference links to all other information on the property.
There's two tables, Referral (For a tenant, with the Property Reference as a foreign key) and PropertyInfo (Holding all the property information)
Basically I want to save users as much input time as possible, so I'd prefer if they could just enter the property reference for a person, and that populates the rest of the table.
I'm currently using DLookup on the main form where it displays the information related to the property reference, obviously it's not actually being saved into any fields.
Will this method be okay if I would want to search the records by the address on the main form?
I have a form that consist of many fields that the user needs to manually input data. 3 fields on that form are the criteria i need to determine which pricing to use back on the table. The first field, which name is LTYPE, is a combobox that the user needs to choose as its type (i.e 500,501,600,700). The second field, which name is EastCoast, is a checkbox (Yes/No) that tells me if it's East Coast (East = yes and West = No). The third field, which name is NewRenewal, is a combobox that the user chooses NEW or Renewal).
Example 1, if the user chooses type 501, checkbox is YES for East, Product is NEW. Then the pricing is $4,100
Example 2, if the user chooses type 700, checkbox is unchecked for NO (which is West), Product is Renewal. Then pricing is $3,300
I would like the unbound field to auto determine the pricing based on the 3 criterias chosen. I read around the forums that Dlookup would be the function for this, however, i tried many times but it did not work.
I have forms that are printed based on a query parameter of [enter item number]. There are several of these forms that I would like to print at one time (with one command) making it easier for the user to gather their information at the beginning of the day. I also don't want to lose the ability to print them out individually as we do now.
Access 2010 - I would like to use DLookup to show results values from a table and display in a unbound textbox on a form. the results from each column in the table need to be on seperate lines, a break if you may. Here is the code I have so far.
I have a sub form that shows me a companies history. This subform is used on 2 different Parent forms. The record source for the sub form uses a criteria that looks at a companyID field on the parent to determine which records to return. My question is how do I have the query criteria depend on which form is currently opened? The criteria would look something like this:
[Forms]![frmCompanyHistory]![txtCompanyID] OR [Forms]![frmCompany_Project_Details]![txtCompanyID]
If I open the form with this criteria, I will be asked for a value in txtcompanyID for whatever parent form is not open. How do I properly do this without making multiple queries that are almost identical?
I'm sure this one has been asked time and time again!
I currently have a set of staff questionairres each on a different table. Currently when I want to export all the scores for one employee to excel (eventually) I have a macro which runs 7 queries, but each asks for the same criteria (Date To & From) and (Staff Name) in turn - very time consuming!
How do I create a query or macro which will ask once for a date range and an employee name and apply to all of my queries?
I am a novice on access and am trying to do this without SQL
I have a form where users can enter the beginning and ending dates into text boxes. They could also do it for the number of the week (1 to 52) or a single text box for the quarter.
I set up VBA code where, if you click on a button, it will clear out the data from the other two options before a query is run based on the parameters in those text boxes. Here's a sample piece of code.
Code: Private Sub btn_UseDates_Click() Dim lngGreen As Long, lngWhite As Long
I've tried setting those txt boxes to Null and I've tried both "" and " ", but to no avail. The query will work if the three types of ranges (date, week, or quarter) are on OR lines, but not on the same line.