I have a single form with multiple tabs. At the top of the form appears the name of an individual and below the name are multiple tabs containing information specific to that individual. Each tab has a separate underlying table, which is the data source for the information contained on that tab.
As best as I can tell, I can only use one single data source (a query at the moment) to populate all the data that appears on all the tabs. Is there a way that I can have a separate data source (namely, a table) for each tab?
I am creating a database in which to store my data collected in my research. I have 8 tables that are linked by a SampleID number. I have created a form which has tabs, the first tab contains the information required for entry on table 1; how I am going to add the controls from table 2 onto the second tab.
I know how to make additional tabs and I have created a separate form for table 2 with the form wizard, cut and pasted the fields into the second tab on my first form BUT how to establish the source for those controls back to the second table. To make matters worse (of course not to be too dramatic here) I can see the other table in my Field List of related tables.
I have a reservations form, which will be used to store the checkin and checkout dates for customers; these are related to the reservations table. On the same form I also want room details showing such as room number, this is on a separate rooms table. I believe that the room number will be a query to show which rooms are available and therefore display the room number on the form. So I need integrating this into the form. Also I have not set it as a subform, the reservations form carries on from the customers form, as a new form.
I'm trying to clean up a form a bit and have it only show certain subforms/graphs if the data exists. I already have columns in a combobox query to show an "X" for if certain data appears:
Now, I know I could build another query and have some system go through and identify these things, but the easiest thing would be to reference the "X" in the columns of the combobox. Is there an easy way to reference values in the other (non-primary) columns? Or can you think of an easy way to make these subforms only be visible when the data exists? Maybe have an on load event for the subform?
I have a main form with multpile tabs - each tab containing a different subform.
Link Master Field: ClientID (field in Master Form) Link Child Field: Client ID (field in all subforms)
There is another field that all the subforms (continuous type) have: ObligorName. All the subforms are based off of a huge table (subtable) with fields: Obligor Name, Address, Zipcode, City, DOcuments Required, Bank Account Number, etc......
Essentially, the user will fill in the 10 obligor names associated to ONE client on the first subform on the first tab + address + zip code + city.
When the user clicks on the second tab to fill out the next subform, I want all 10 obligor names to be there already, so then they can fill out Documents Required + BAnk Account Number.
If I fill out the first subform and then exit out of the form and then reopen it, the other subforms autofill.
HOWEVER, I dont want to have the user have to do this. It wastes a lot of time. What can I do about this so that the table is automatically updated right away. They are all based on the same table so I do not see why there is so many issues.
hi guys, im doing a uni project in access for a small business and the problem i have is that i am making a booking form, and on there needs to be owner details, animal details, and booking details.
these all need to be entered when making a new booking, the problem i have is that i can only seem to be able to use one control source (from the owner table) how do i use multiple control sources on that one form? :confused:
I know that it isnt advised to store the concatenated value but in this case, I have a memo field which is the description of a particular system component.
i have Unbound Combo Boxes for descriptive elements such as COLOUR, SIZE, CONNECTIVITY, MAKE.
ALL of these i would to store in a field in my table and called Description and separate them by colons or the actual words which describe the category.
I work for a small manufacturing company and have been asked to set up an access database to track production. The end goal is to have a touch screen at every machine where operators will input data. This data will then dump to a different workbook for each machine. My question is: Is it possible to link one access tables with multiple xls documents so that, as data is added to any of the workbooks, it is then updated to a single access table? I also will need to find a quick way to link new files to the table as new parts are put into production.
I am trying to create a columnar report that relies on information that are expressions in various queries. Unfortunately, I can't seem to create them in one query because the criteria is mutually exclusive. I used the report wizard to start the report based on the single expression in the first query. Now I want to start adding the other data but I can't seem to get it to work. All I really want to do is include fields that have the have the value, which is already summed, from the other query. When I try that I get error messages like "you tried to execute a query that does not include the specified expression 'expressionName' as part of an aggregate function' and it just goes further downhill from there. What is the easiest way to get this simple values into the report? Is there a way I can create a field in the report that uses a SQL statement for just that field so I don't have to have the report linking to 50 different queries?
I have a tab control form with about 5 tabs. However when I move to the tab that has a datasheet form, the page moves down. You have to scroll up to see the above tabs. Is there something I'm missing on this simple tasks? Is it better to have it as a basic form for easier interface.
Wondering if anyone has a solution for my problem.
I have 2 data sources, one which is an ODBC and one which is an import table. I have a 2 queries each querying the 2 data sources seperatly.
My problem is... One of the fields which I need to do a join to a reference table has a different data type in each of the data sources. I have tried changing this in the imported table NO JOY!! You cant change the data type in the ODBC link.
I am using Access 2010 and Excel 2010. I need to have VB script to export the access table 502 records by 38 fields into Multiple Excel workbooks each having multiple tabs. In the Access table each record has two fields: Div and Tab that will be used to name each workbook and each tab (sheet). There are 6 unique "Div"'s to name the 6 workbooks and there are several "Tab" names for each Div (workbook).
Note: These 6 workbooks with multiple tabs were originally imported into Access from one common folder on my desktop by this routine:
Option Compare Database Option Explicit Private Sub Command1_Click() Dim blnHasFieldNames As Boolean, blnEXCEL As Boolean, blnReadOnly As Boolean Dim lngCount As Long
I am using Access 2010 and Excel 2010. I need to have VB script to export the access table 502 records by 38 fields into Multiple Excel workbooks each having multiple tabs. In the Access table each record has two fields: Div and Tab that will be used to name each workbook and each tab (sheet). There are 6 unique "Div"'s to name the 6 workbooks and there are several "Tab" names for each Div (workbook).
Excel workbooks would take names from the "Div" field and the tab names would come from the "Tab" field in the Access table. First need to find workbook name (Div - Field) then the look for each sheet name (Tab - Field) to create 1st Excel workbook with all the sheets (Tab) and repeat the process. I think you need to approach of read the Access table one record at a time keying on the "Div" and "Tab" fields in creating each Excel workbook with the associated multiple tabs (sheets) that are written to a common folder.
Note: These 6 workbooks with multiple tabs were originally imported into Access from one common folder on my desktop by this routine.
Option Compare Database Option Explicit Private Sub Command1_Click() Dim blnHasFieldNames As Boolean, blnEXCEL As Boolean, blnReadOnly As Boolean Dim lngCount As Long Dim objExcel As Object, objWorkbook As Object Dim colWorksheets As Collection
I'm trying to make a very simple click through data entry screen in Access 2007. For each record I want to have a standard form with three buttons at the bottom. Each button opens a new form (each form has a set of tabbed pages on it as there is lots to enter).How do I make sure that each of the additional forms populate the same record as the main form.
I have a form with a lot of data structured in tabs. Since the tab loads all the data at once while the navigation form browses to the desired form. I have tried but the issue is the Master-Child link. The form in the navigation form is not considered as a subform, hence, no way to set a Master-Child link. The navigation form itself is the subform but even when setting up a link there it has no influence on the form displayed by the navigation form.
I am working on a project where I have data coming in from about 70 different sources across my state... but right now, they're all submitting their data in different ways (some through websites, some through databases, and some through excel spreadsheets they send monthly). As you can imagine, this is a nightmare for trying to get all of the data in one place to do some statistics on.
My question is this - if I were to set up an Access form where each client could fill in the blanks with the same information they've been submitting to all these other sources, could I send it out to them and have it all compile in one place? The last place I worked, we used Access to manage all of our on-site stuff, but we were all on the same network. Could it work the same way if everyone is spread across one state?
I have a master form named frmCustomer. I then have a set of tabs (not the navigation tabs) embedded within frmCustomer. The tabs are Invoice (frmInvoice), Contacts *frmContacts), Notes (frmNotes) and Orders (frmOrders). All form are Single Form. There is another form named frmInv that displays an invoice in a formatted manner. frmINV gets its data from a q1uery called InvQ.
It has a criteria that reads [Forms}![frmInvoice]![Invoice_ID]. I placed a button on frmInvoice that calls frmInv. If I run frmInvoice separately outside the tab the correct invoice displays. If I click the buttom from within the tab I am asked to enter the vale of [Forms}![frmInvoice]![Invoice_ID]. How do I call the frmInv form from the tab?
I have a tabbed form built in Access 2007. It's a series of about 32 different questions, with some being fill-in, some drop down boxes to select from, some radio buttons to choose a rating from 1 to 5. The reason I used a tabbed form was just to keep things consolidated on one screen where no scrolling was involved. All of the entries on each of these tabs are deposited into the same single table. I have 7 tabs, and all of the fields on the 7 tabs compose a single record in the table.
I have the actual tabs hidden, and instead use a button to switch to the next tab (Continue button at the bottom) once all the fields on that tab have been completed. I have all of the necessary fields set to be required, but Access does not validate the entries until the very end of the survey when they click a 'submit' button that actually saves the responses and returns to the opening splash page to start the survey again.
What I want to happen is for the fields on the current tab to be validated before it lets the user move to the next tab with the continue button. If they click continue and have left any fields blank they should get a message that all required fields must be completed or something similar to that.
I have found a thread here entitled "Form Validation before Moving to another Tab" which sounds similar to what I'm doing, but using the button method to navigate to the next tab, there is no BeforeUpdated event to assign that code to.
I have navigation form with 2 tabs I'd like to limit access to users with certain type of account.
There are 2 tables in database that contains user names and types of accounts (tblSecurityLevel and tblUser), and they are used to set user name, login and security level.
It works this way: when you open form, it checks if PC name corresponds to name in UserLogin field (tblUser), if it does it gives appropriate access level depending on set user security, if PC name is not on the list user will be logged as guest.
So far, I used this code and it works great for limiting access to 1 tab:
Code: Private Sub Form_Load() Dim UserLogin As String Dim userLevel As Integer UserLogin = Environ("Username") Me.TxtLogin = UserLogin
[Code] ....
Is there a way to expand the code and add second tab (or even third) with this table structure (I'd like to be able to keep login which 1st checks for pc name).
I have an Access 2003 database. I have a form with 5 tabs. I want to prevent some users from editing data on some of the tabs.
I added some logic to the OPEN property of the parent form but it does not work. "Object doesn't support this property or method." What is the correct way of controlling access of the data on the tabs?
In the logic below I first determine the user's permission for each tab. If the user has read-only access they will not be allowed to edit anything on this tab. There are 50 fields on the accounting tab and a subform. If possible, I don't want to have to specify each field individually in the code. Plus there are 5 tabs with numerous fields on each.
BTW: [add designer] is the parent form and [accounting] is the tab.
If DLookup("[permission_studentacct_ReadOnly]", "Users", "Contact_ID = " & Forms![Global]![UserID]) = True Then Forms![Add Designer].[Accounting].AllowEdits = False Else End If
Hi, I'm trying to connect to SQL Server Express from MS Access 2003.
I've created an ODBC data source and tested it within the ODBC Wizard. It successfully connects to the SQL Server database.
From within MS Access, I choose File > Get External Data > Import and I'm presented with a dialogue for choosing the data source. As soon as I choose ODBC from the Files of Type drop-list, the dialogue disappears. No error-message, nothing!
I have created a new form with a few tabs, I need to let the value's of the last record be carry to a new record, but it must only show when I press the first letter on the new record, I did rerad about this, but only find it for normal forms. Did try to get it to work, but it dows not work on tabs form
I want to create a form that incorporates a number of different tables & tabs. When I switch tabs (which represent the information on the different tables) I need it to be consistent with the main table and all the information that follows it from the different tables.I've been told the best way to do that is with a parent form but I haven't been able to find an EASY step-by-step instruction on how to do that.
importing data from two excel sources to one table. I have a table with: Unit, Info1, info2, info3, info4, info5, info6, info7. I have been able to import from the first file which has all of the unit information-'info1-5'. I need to import another file to fill 'info6-7' based on specific unit numbers. I have created two excel tables the first with the headers "unit, info1-5" and the second with the headers "unit, info6-7." The first works fine and adds all the data I want it to, but when I try to do the same with the second it doesn't add any new data.I cannot add the last two fields to my first spread sheet because it would involve sorting through 700+ units and adding the data manually to 400+ of them.
I have a form with 3 tab controls. Within each tab, there is a bound list box that lists records based on a combo box selection. All list boxes are bound to the same table and records in each tab will be in the same order.
I would like the same record be selected in each list box within the tabs, e.g. when record #2 is selected on tab1, the same record will be selected on tab2 and tab3, or if I click on tab 2 again and change the selection to record #3, record #3 will be selected on tab1 and tab2.