Forms :: Multiple Field Screen Search - MSG Box Not Coming Up If No Records Found
Aug 18, 2015
I have created a multiple field search screen. The script is attached.
I would like to add a MSG Box "No records found" when the user types in information in any field where no records are available.
Just cannot get this working.
View Replies
ADVERTISEMENT
Aug 24, 2012
I am trying to add a field with a combo box which allows multiple values to the back end of a split database. When I do this and then open the form on the front end I get the following error:
"The search key was not found in any record." The values are chosen from a value list that I created.If I add a combo box field that does not allow multiple values I can open the form fine.The database was created in Access 2007 and is now running on Access 2010.
View 7 Replies
View Related
Feb 12, 2014
I have a screen with multiple records from a database. At the top of the screen I have a button that lets the user change the mode between read only and edit modes. The current mode is displayed near the button. When the user decides to update a record or records he goes into the edit mode and starts changing the records. The user may change any number of records on the screen. When editing is finished he presses a button called save and close gets feedback and leaves the screen. Now in this process how do I keep track of the records that are changed on the screen . Plus he can hit the page down key and go to the next page and make changes there also. Is it possible to stop the hitting of the page down key. What indicators can I use to spot the records changed?
View 14 Replies
View Related
Jun 9, 2015
I have a continuous form that I would like to filter with a combo-box in the forms header. The combo box is populated with the table's primary field [ID] which is an Autonumber. When I click the caret on the combo box, it provides a list of ID's but when I select one, I get this error message "Run-time error 3709, the search key was not found in any record". The code is:
Private Sub Combo 31_AfterUpdate()
If Me.Combo31 & ""<> "" Then
Me.Filter = "[ID]= '"& Me.Combo31 & "'"
Else
Me.Filter = ""
End If
Me.FilterOn = True
End Sub
View 11 Replies
View Related
Nov 7, 2013
I am trying to provide the user a custom search feature. They want to enter a keyword or phrase and search 3 memo fields and filter the form base on the records found. they also want to be able to search the whole phrase or any part of the phrase.
I have a like expression for any part of the phrase but I when I set it up for whole phrase it doesn't work. Even if I run a simple query and use
For example: There's an acronym the user is looking for : ACA
If I set my query up like this: [field1] like "*ACA*" or [field2] like "*ACA*" or [field3] like "*ACA*"
it not only finds records with that acronym but it also finds records where that combination is found in a word, for instance vacate.
How can I set up my query to find the whole word?
View 3 Replies
View Related
Apr 11, 2015
Below are what I have created.
Table 1 with 3 fields:
- UniqueID
- field1
- field2
Form 1
- text box to enter UniqueID
- button to save the new UniqueID and date/time stamp
I set the Default Value for UniqueID in Table 1 as Now()
Each time I enter a new UniqueID and click the button, a new record will be created in Table 1 with the entered UniqueID and current date/time in field1
This form seems to work well.
Form 2
- text box to enter UniqueID
- button to update
How I can use the UniqueID entered into the textbox of Form 2 and update the corresponding field3 with a new current date/time stamp?
View 1 Replies
View Related
Dec 10, 2014
Create form to search multiple fields in table
Return records that match search
Open the record that you want in Form View for editing
View 1 Replies
View Related
May 1, 2013
I would like to have 5 combo boxes from which users can choose fields to search, e.g.
cbo1 - choose YEAR, TYPE, LOCATION, COST, COLOUR, SIZE
cbo2 - choose YEAR, TYPE, LOCATION, COST, COLOUR, SIZE
cbo3 - choose YEAR, TYPE, LOCATION, COST, COLOUR, SIZE
cbo4 - choose YEAR, TYPE, LOCATION, COST, COLOUR, SIZE
cbo5 - choose YEAR, TYPE, LOCATION, COST, COLOUR, SIZE
criteria are stored in txtbox1, txtbox 2 etc. so the search string could be
WHERE cbo1 = txtbox1 AND cbo2 = txtbox2 etc.
If the user doesn't choose anything for a combo, the search should ignore that field.
View 6 Replies
View Related
Apr 21, 2013
I have a table in which there are approximately 15k records. The name field has approximately 2500 unique values. I need to search the table for multiple names and return the results from the table. This would then be used as a report. Due to the users being very novice, a form is needed for the search.
Example:
Search for Smith, John; Wilson, Bill; Jones, Jeff
Return
Name Year Brand Make
Smith, John 1999 Oldsmobile 88
Smith, John 2001 Chrysler 300s
Wilson, Bill 1994 Porsche Carrera
Wilson, Bill 2007 Kia Sporty
Jones, Jeff 2004 Chevrolet Camaro
Jones, Jeff 2011 Chevrolet Impala
My knowledge of forms is basic, however, I can be a quick learner if on the right track.
View 1 Replies
View Related
Jun 27, 2013
I am trying to get the records on start and end date, still showing error no records found.
My code is like this:
Private Sub Command90_Click()
Dim db As DAO.Database
Dim rst As DAO.Recordset
Dim strReport As String
Const strcJetDate = "#dd/MM/yyyy#"
[code]...
View 1 Replies
View Related
May 6, 2013
All. using 2010. I have a form and a subform. my master and child links are set but when I scroll thru my form; my subform does not change to show the matching records. I do have an unbound search field for the same field as the master and child links. When I type in the search field for a record; the subform does change to that particular record. Do you think that has anything to do with it?
View 1 Replies
View Related
Apr 28, 2014
Code:
Dim rs As Object
Set rs = Me.Recordset.Clone
rs.FindFirst "[OwnerID] = '" & Me![lstUsers] & "'"
Me.Bookmark = rs.Bookmark <---- error is here for the datatype mismatch or No record found
OwnerID is a string.
I have tried
Code:
rs.FindFirst "[OwnerID] = '" & Me.lstUsers & "'"
Me.Bookmark = rs.Bookmark
I have tried
Code:
Set rs = Me.Recordset.Clone
rs.FindFirst "[OwnerID] = " & Me![lstUsers]
Me.Bookmark = rs.Bookmark
View 14 Replies
View Related
Aug 19, 2005
Hi,
i was working with a database and accidently deleted the first row, i couldnt get the automatic number to number another row 1, so i took out this table and created another one. however even though my new record is in order, when i pull this through to the website it's coming in the order 1,3,4,5,6,2... and the coding for the page worked fine with the db beforehand!!! so now i'm a bit lost
if anyone has any ideas, they'd be appreciated!!!
Thanks in advance!!!
Megan
View 14 Replies
View Related
Sep 20, 2014
I have a report which gives me a count of records found for each group
group 1 - 10
group 2 - 13
group 4 - 82
what i want is a total below this - ive looked at calculated controls however cant seem to get it what soever - I've tried likes of =sum([counts])
View 1 Replies
View Related
Oct 28, 2014
I have a problem with my database I have a combo box that will search for my record. Actually its working I input the specific number it goes to the specific record. But I want, if there no existing record in my database it will display a Messagebox that "No record Found" I try to put a code in a macro builder in a after update property field but nothing happened.
Expression code that it will display the msgbox if there's no record found.
the given code from macro builder is attached. I try to have an if else statement but I dont know how to not equal that giver conditional expression.
View 10 Replies
View Related
Jun 12, 2013
I have a form listing tasks to which I make personnel assignments with a multi-value list field type. It takes some time to select from 15-25 employees on the list for each task, especially considering that small groups of employees will be assigned to the same selection of tasks.
What I want to do is select multiple records with the mouse, then click a command button opening a form in dialog mode with the selection list. The user then clicks to make his selections and clicks ok, which then updates the multi-select field for the selected records.
View 1 Replies
View Related
Jan 28, 2008
Hi
I am trying to import a table from a notepad doc and i get an error message " The search key was not found" Please can someone explain to me what this is about and if there is a solution for it. Does this have anything to do with size of the database beign too large?
Thanks
Avi
View 7 Replies
View Related
Mar 6, 2008
Hi,
I have a simple one table database which I made a few weeks ago to print letters. All was working ok until I hit record #14, I enter the client details and when I quit the database an error message appears saying 'The search key was not found in any record.' with an option to hit OK or Help buttons. If I hit OK another message box appears saying 'You can't save this record at this time.' and stating that Access has encountered an error & if I close the database I will loose any changes etc...
If I do close it, most of the data I have entered turns to chinese characters & the rest doesn't even ressemble anything close to what I have inputted.
Strangely enough records #15 & 16 work ok and the error only seems to be when I alter the data in the postcode field on record #14
Any assistance would be gratefully received
Ben
View 7 Replies
View Related
Jan 17, 2005
Hi Folks,
This is a Combo box, which I have changed to Text Box to search records based on the PRO Number entered. This works fine but if its not find a record, the form displays the first record in the table. How can I prevent this and just show a message that this record is not found and enter again.. "
****************
Private Sub Combo143_AfterUpdate()
' Find the record that matches the control.
Dim rs As Object
Set rs = Me.Recordset.Clone
rs.FindFirst "[PRO] = " & Str(Nz(Me![Combo143], 0))
If Not rs.EOF Then Me.Bookmark = rs.Bookmark
End Sub
****************
I have tried with the following but not working...
If Not rs.EOF Then
Me.Bookmark = rs.Bookmark
Else
msgbox("Record not found")
end if
I also want to hold control back on the box after displaying the message..
Could anyone please help..
Thanks,
binjos
View 2 Replies
View Related
Aug 16, 2005
We are running Access 2002 on Win2k. The database has been split into front and back ends, and synchronization occurs directly over LAN with 7 replicas. During synchronization I received a failure message "The search key was not found in any record. (Error 3709)."
I have tried several things found on Microsoft KB and other forums-- Compact and repair, removing indexes from memo fields, updated Jet and Microsoft Data Access Components-- but nothing has worked. Does anyone have any ideas on this one?
Thanks,
James
View 1 Replies
View Related
Aug 10, 2005
Hi,
Anyone can tell me what cause the message "The search key was not found in any record" when I try to delete a record from my table?
Appreciate your help.
Dny
View 1 Replies
View Related
Aug 16, 2005
I have a form / subform. The form has a memo field. I have 10,000 plus records in the Form table. Each time I make a correction in two or more of the fields, I get the error: The Search Key was not found in any record error.
For instance, I can even manually tie a many to many relationship in a join table without an error by adding a new record at the table level but I can't do this in the form. In neither place can I change the memo field more than once without this error. What resets it so I can make one more change is to Compact & Repair Database. A hassle and then some. :(
View 1 Replies
View Related
Sep 5, 2003
Anyone know why I might be getting this error?
Microsoft JET Database Engine error '80040e21'
The search key was not found in any record.
/***.asp, line 1113
This happens after a) I update an access Memo field, and b) query the record for re-display.
The only way I've found to resolve the problem is to compact and repair the db, but does anyone know what might be corrupting the data in the first place? The submitted text included html tags.
View 14 Replies
View Related
Jul 17, 2014
I am having today is that after making my database into an accde and putting it in a shared location for someone else to run it. The Error search key was not found in any record appears. Then macros single step, stop all macros appears and what ever I press from here crashes the database and it wont open.
View 2 Replies
View Related
Mar 16, 2015
I have a pop up window that maximizes and the need to format a Memo Field to users specification.
Unfortunately the Mini Popup Bar that comes up when you select text is very shy and annoying when it doesn't show up. It's Completely Unreliable.
So I thought I'll make the Controls on the form for Bold,Italic... etc but I can't seem to get the code to work.
My TextField is a Memo and I have changed the TextFormat to RichText, but I cannot use any of the commands like .SelBold or .SelColor etc.. It gives me a Compile Error: Member or Data Member Not found.
I don't understand why? Is there a Add In/Reference that I need to include?
View 2 Replies
View Related
May 5, 2013
I have created 2 tables:
StaffID
StaffTrainingID
Table 1 (StaffID) - contains all personal details in the form of forename + surname + position + email + contact numbers ect. Each field/person has an autonumber.
Table 2 (StaffTrainingID) - contains all mandatory training/lectures (18 fields in total). I don't wish to list each staff member again in table 2 so have put a StaffID field in (data type is number).
However, when I try to type in the StaffID number in that field so I can link that person to the relevant training he/she has taken, Access won't allow it.
View 4 Replies
View Related