Forms Navigation
Jan 18, 2006How can I stop a mouse (with a roller scroll) in the middle from navigating through records without me clicking on the forms navigation buttons.
View RepliesHow can I stop a mouse (with a roller scroll) in the middle from navigating through records without me clicking on the forms navigation buttons.
View RepliesI am not able to disable NavigationButton when i login navigation form using login form. I am using MS access 2007 - 2010.i am using below code but getting error.
Forms![Navigation Form]!NavigationButton13.enable = False
Error
Run-time error '438'
Object doesn't support this property or method.
Any other method to disable NavigationButton.
New to the navigation form: I need several forms in the navigation form to all relate to the same client ID field. I have this information on the main form but the form with in the navigation form will not pick it up.
I have tried =[Forms]![Frm Client Information Navigation Panel]![ClientID] But just cant get it to pick up that information...
I would like to have something like the master link fields and, child link fields but when I add a form to the navigation form this option in not available.
I want create combination of navigation forms, navigation forms with two horizontal level and vertical level that link to navigation buttons in second level of horizontal navigation.
View 1 Replies View RelatedI am attempting to create a Navigation Form to allow another computer in my network to be able to utilize necessary forms within a database (through RunTime). I was hoping this would be a clean task by simply loading the forms into the tabs of the Navigation Form, however that is clearly not the case.
For starters, When attempting to use a form that has some VBA behind it (Docmd.ApplyFilter based on a selection from a combo box), I am given the error stating: "The action or method is invalid because the form or report isn't bound to a table or query."
After searching on this error, I believe it's because my Navigation Form does not have a record source. If this is the case, then I am confused as to what record source it should have, as with the 3 forms I need to access through the Navigation Form all pull data between various tables and queries within the database (some not related).
Now I've also come to the conclusion that my VBA references now must change in order to correctly use my forms. A correct reference would look something like:[Forms]![Navigation Form]![NavigationSubform].[Form].[My Form's Control]..Is this necessary in order to write any events, such as an AfterUpdate on a combo box?
I have set up my main data entry form as a navigation form with 5 tabs/pages. The first three all contain fields from my main data table, the other 2 tabs/pages have fields from related tables.
Ok, so my question is: is if there is a way to go from tab/page 1 through the other 4 in succession with the main primary key (in this case an object ID number) automatically populated through. As it is now, when I start a new record for an object on tab/page 1, and then go to the next tab/page, it registers a new record has been created (at the bottom of the form it updates the total amount of records entered), but I have to manually enter in the ID field at the top the object ID number that I am entering info for. Otherwise it is still showing the details associated with the last record I was in the form updating.
I have a Main (Home) form that has a sub navigation form (frmNavigationSubform).Need to access 3 forms. Forms 1,2 and 3. Also, have 1 options form.
Subform has 2 Navigation buttons. NavigationButton2 and NavigationButton3.
NavigationButton 2 Navigation Target Name = 1 (frm #1).
NavigationButton 3 has no Navigation Target Name. This is passed on when user picks Option1 or Option2 form options pop screen.
Now I can pass the name to the Navigation Buttons2 but the subform does not show it. I have to click on the Navigation Buttons2 again for it to show. What I want is when the user makes the choice in the options screen the name is passed and form 2 or 3 should load/show.
I have a form imbedded in another and would like to remove the navigation bar from the form being imbedded so 2 do not show in the final product.
Is there a way to do this and if so, how would I do it.
Thanks!
I cannot get rid of the navigation bar from the subform. Navigation bar property from the subform is not appearing at Properties.
Also, how do I remove the left column?
Attached is a picture.
Sorry if this is too trivial to be posted as a new thread, I have spent a considerable amount of time trying to do this but have failed miserably.
I want to remove the set of command buttons at the bottom of the forms, (the navigation buttons to move the next record etc.) as i want to create my own. And also when I have got two or more subforms this looks too cluttered.
Can anyone help me?
Thanks.
I have a Navigation form that has multiple forms that I linked to buttons at the top. They open the forms (now subforms) for the most part just fine. The issues come into play when I click on a combobox that pulls from a query of a table. Once this data is selected I have another combo box that is supposed to be filtered based off of the original combo box selection. Everything works on the original forms but once they are in subform form I get the error "Forms!MGM Search Form!STATE" which is the name of one of the forms and its asking for me to enter a parameter value for the query. Its almost like its not requerrying the data like it does in the original form
Private Sub State_AfterUpdate()
me.Facility.Requery
End Sub
basically the first combo box is a list of states and then the second combo box is a list of facilities in that state. Once you click on the state in the first combo box it filters the facilities in that state. But again once in the subform view it will not requery.
I am using Access 2007 and am a former user of an old flat-file 32 bit program under Windows 3.x. I am fairly new to MS Access 2007. I run a filter or query, which will return X number of records. Then, I will search those X records by specific text, such as "assist" from the record navigation buttons. I search for "assist" and the text will be highlighted each time it is found in any text or memo field in the record. Hitting Enter takes me to the next occurrence and highlights the text. If "assist" occurs in 4 fields in a record, for instance, it will be highlighted in each of those 4 fields one by one as I hit Enter. The next Enter takes me to the next record and will then continue to the next occurrence of assist" in any of its fields. It will continue to highlight "assist" in those fields, in succession, until the last occurrence in all of those records is found, in which case Enter does not return "assist" anymore because the last occurrence has already been found.
This does not always work. Often, I get every occurrence of "assist," but in the current record only, even though the word exists in other remaining records that were returned with my original filters/query.
I am using Access 2010.
In my database forms, i try to use Ctrl + F and its working fine. But when i link that form to a Navigation form and tried ctrl + F , i got the following error message, how to fix it.
Error msg.
You Can't use find or replace now.
I also attached the error msg.
I've spent far too long searching for the answer to this. On my form's onCurrent event I want to check if I am on the last record and if so, disallow navigating to the next "record" which is blank. I'm not sure why Access will let this happen to begin with when selecting Next Record. Isn't that what New (blank) record is for?
View 11 Replies View RelatedI have inherited forms, some of which somehow lock the Navigation Pane. For those that do I cannot find how the Nav Pane is locked. Is it a form property? If so which? "acCmdWindowHide" is not used in the program.
This issue prevents me from viewing form properties or Form VBA when such an open form is switched to the Design View.
In a form, I go to a textbox with setfocus. The whole text is selected then. But how can I place the cursor after the existing text, so that I can begin writing immediately?
View 3 Replies View RelatedI was just wondering if this could be done by code or he only way o do it was by the form properties?
View 1 Replies View RelatedA message "Microsoft Office Access has stopped working" appears everytime I input something in the Subform [Search] box beside navigation button. After that, the database closes. Attached is the screenshot of my subform.
View 5 Replies View RelatedI have a navigation form with two tabs. One tab contains a subform for a technician to enter several part request. The other tab is for the parts room to edit and update the request.The issue i am having is i need the parts room form to be requeried every time the technician enters information on his tab.
I added a command button and tried
[NavigationSubform].Form![FRM New Request Part Room] .Requery
but it can't locate this form since it is in a separate tab.how do i do this?
I'm attempting to create my first split database and I'm failing. Here is what I did in the exact steps.
1 - Created a database with one table and 11 forms (database is on my desktop).
2 - I created a split database and saved the back end on our company network.
3 - The front end is on my desktop(works fine)
4 - I put a copy of the front end on the company network (near the same location as the back end)
When I tried to open the front end from another persons computer who has access to the location i saved the back end and front end db's . It open fine, but my navigation form will not open the other forms. I get a blank sheet.
I am pretty new to access so i am using a very basic function structure to open a navigation form using if-then-else condition, Below is my VB coding:
Option Compare Database
Private intLogonAttempts As Integer
Private Sub Emp_Exit_Click()
DoCmd.Quit
End Sub
Private Sub EmpLogin_Click()
[Code] ....
I am getting an run time error '2467': "The Expression you entered refers to an object that is closed or doesn't exist"...
I have a form with a bottom that has a macro that uses applyfilter to filter the current form based on what is within a textbox located on the form.
I used the macobuilder and have my where condition as
[num] Like "*" & [Forms]![frm_Main]![Text181] & "*" Or [name] Like "*" & [Forms]![frm_Main]![Text181] & "*"
This works when I open the form by itself but when I try adding the form to a navigation form I get prompted to put in "num" and "[Forms]![frm_Main]![Text181] " etc. when I click the bottom.
I have decided to move away from Switchboard in Access 2010, to what I find to be more user-friendly; the Navigation Forms.
However, when I attempt to export any of the data from my navigation forms, the result is a blank Excel sheet. I can easily go into the forms themselves on the left navigation panel and export from there, but when myself or a user attempts to do this from the navigation forms themselves; well, the blank Excel sheet is the result.
How do you create a work-around, so that it is possible to export to Excel from these navigation forms?
I am fairly new to Access 2010.
I'm using Access 2010 and need to update a sub form in a form that is within a navigation form. So it goes:
Navigation Form > Main Form > Subform
How do I do this? I've attached the following to a click event of a cmd button but I just can't get it to work:
Forms!frmMain.NavigationSubform.Form.frmJobHeadSub Form.Requery
I need to execute some VBA to load a new form in my navigation view, not a popup form.
If use DoCmd.OpenForm "DB History" it opens the form as a new form.
DoCmd.BrowseTo acBrowseToForm, "DB History" set the focus on the DB History navigation button but doesn't open it.
So I think I need to add the path.
'DoCmd.BrowseTo ObjectType:=acBrowseToForm, ObjectName:="DB History", 'PathToSubformControl:="??"
This is where I am stuck.
My main form is Navigation Form1
The sub ins NavigationSubForm
and the form loaded is Form1 which I would like to replace with DB History
Can I use combo boxes placed in the detail area of a navigation form, above the sub menus but below the navigation? I am not able to get one to work properly . I can set it up but when I run the form, and try to pick an item from a list, it will not work...
View 2 Replies View Related