Forms :: Navigation Control And Switch Between Tabs

Jun 16, 2015

I'm using a navigation control with 3 tabs. I would like to open a specific tab after the user login. I tried this but it does not work:

NavigationControlName.Tabs.Item("tabNameToOpen").S etFocus

I have tried:

Me.NavigationSubForm.SourceObject = "FormName"

then the form change but the tab selection no!

View Replies


ADVERTISEMENT

Forms :: Embed Navigation Form Instead Of Using Tabs

Oct 21, 2014

I have a form with a lot of data structured in tabs. Since the tab loads all the data at once while the navigation form browses to the desired form. I have tried but the issue is the Master-Child link. The form in the navigation form is not considered as a subform, hence, no way to set a Master-Child link. The navigation form itself is the subform but even when setting up a link there it has no influence on the form displayed by the navigation form.

[URL] ....

View 3 Replies View Related

Forms :: Navigation Form - Limit Access To Tabs

Feb 7, 2015

I have navigation form with 2 tabs I'd like to limit access to users with certain type of account.

There are 2 tables in database that contains user names and types of accounts (tblSecurityLevel and tblUser), and they are used to set user name, login and security level.

It works this way: when you open form, it checks if PC name corresponds to name in UserLogin field (tblUser), if it does it gives appropriate access level depending on set user security, if PC name is not on the list user will be logged as guest.

So far, I used this code and it works great for limiting access to 1 tab:

Code:
Private Sub Form_Load()
Dim UserLogin As String
Dim userLevel As Integer
UserLogin = Environ("Username")
Me.TxtLogin = UserLogin

[Code] ....

Is there a way to expand the code and add second tab (or even third) with this table structure (I'd like to be able to keep login which 1st checks for pc name).

View 4 Replies View Related

Forms :: Navigation Forms - Moving Between Tabs

Aug 21, 2013

I have set up my main data entry form as a navigation form with 5 tabs/pages. The first three all contain fields from my main data table, the other 2 tabs/pages have fields from related tables.

Ok, so my question is: is if there is a way to go from tab/page 1 through the other 4 in succession with the main primary key (in this case an object ID number) automatically populated through. As it is now, when I start a new record for an object on tab/page 1, and then go to the next tab/page, it registers a new record has been created (at the bottom of the form it updates the total amount of records entered), but I have to manually enter in the ID field at the top the object ID number that I am entering info for. Otherwise it is still showing the details associated with the last record I was in the form updating.

View 7 Replies View Related

Forms :: Tab Control Form With About 5 Tabs

Nov 21, 2013

I have a tab control form with about 5 tabs. However when I move to the tab that has a datasheet form, the page moves down. You have to scroll up to see the above tabs. Is there something I'm missing on this simple tasks? Is it better to have it as a basic form for easier interface.

View 2 Replies View Related

Forms :: One Table / Three Forms - Each Form With Control Tabs

Jul 4, 2013

I'm trying to make a very simple click through data entry screen in Access 2007. For each record I want to have a standard form with three buttons at the bottom. Each button opens a new form (each form has a set of tabbed pages on it as there is lots to enter).How do I make sure that each of the additional forms populate the same record as the main form.

View 1 Replies View Related

Forms :: Carry Current Value Of A Control To New Records On A Form With Tabs

Nov 10, 2014

I have created a new form with a few tabs, I need to let the value's of the last record be carry to a new record, but it must only show when I press the first letter on the new record, I did rerad about this, but only find it for normal forms. Did try to get it to work, but it dows not work on tabs form

View 2 Replies View Related

Forms :: Edit Button With Navigation Control

Oct 21, 2013

I am working on Data entry form where a user can enter the details in the form and save and go ahead, its a single form in default view. I want to provide an edit button with navigation control in this form only where they can edit their wrong record for update.

View 1 Replies View Related

Forms :: Navigation Form - Using DB Forms Under Its Subform Control

Jun 19, 2013

I am attempting to create a Navigation Form to allow another computer in my network to be able to utilize necessary forms within a database (through RunTime). I was hoping this would be a clean task by simply loading the forms into the tabs of the Navigation Form, however that is clearly not the case.

For starters, When attempting to use a form that has some VBA behind it (Docmd.ApplyFilter based on a selection from a combo box), I am given the error stating: "The action or method is invalid because the form or report isn't bound to a table or query."

After searching on this error, I believe it's because my Navigation Form does not have a record source. If this is the case, then I am confused as to what record source it should have, as with the 3 forms I need to access through the Navigation Form all pull data between various tables and queries within the database (some not related).

Now I've also come to the conclusion that my VBA references now must change in order to correctly use my forms. A correct reference would look something like:[Forms]![Navigation Form]![NavigationSubform].[Form].[My Form's Control]..Is this necessary in order to write any events, such as an AfterUpdate on a combo box?

View 4 Replies View Related

Modules & VBA :: Hide Navigation Pane And Documents Tabs

May 27, 2014

I'm wondering if it is possible to create a module to hide the navigation pane and document tabs? I know this is possible via the Access Current Database options however I'd prefer this to be done via an Auto Exec that runs the sub. (i already have it for the ribbon)...

View 5 Replies View Related

General :: Minimize Navigation Pane And Upper Tabs

Jun 25, 2012

Is there a way to minimize the navigation pane and the upper tabs on start up? I have several big forms that don't seem to fit unless these are minimized.

View 5 Replies View Related

Forms :: Referencing A Control On Access 2010 Navigation System

May 29, 2015

I have an Access 2010 Database frontend to SQL Server 2008 Backend. So far there are 3 Tabs in the Navigation System. The first one is the primary Data Entry form which has a tab control with 3 subforms.

Here's the problem. The database is designed to track potential members based on different types of Ads. The primary Data Entry form holds all of the demographic data for the person that called in response to an ad. The first tab has a subform to track how many times that person has contacted us. The second subform tracks which advertisements the person is contacting us about and the third tracks which Events that person attended. There is no correlation between contacts, Ads and Events.

On the Advertisements we have about 7 different types of Ads we do and each ad can be run multiple times on different days. We want to be able to track which Ad the person contacted us about. The Advertisement subform has a comgo box for the Ad type and a combo box for the ad date. the source for the combo box for the ad date includes the combobox for the adtype as the criteria. That criteria is what's giving me the problem. I've used:

forms!mainmenu!navigationsubform.form!potential_me mbers!frmAdvertisements!cboadvid

Along with every other variation I can think of. The form itself is frmAdvertisements but I'm using it in a tab control and I also tried:

forms!mainment!navigationsubform.form!potential_me mbers!adv!cboadvid

View 6 Replies View Related

Forms :: Show Tabs And Subforms In Tabs Only If Data Exists

May 6, 2013

I'm trying to clean up a form a bit and have it only show certain subforms/graphs if the data exists. I already have columns in a combobox query to show an "X" for if certain data appears:

Now, I know I could build another query and have some system go through and identify these things, but the easiest thing would be to reference the "X" in the columns of the combobox. Is there an easy way to reference values in the other (non-primary) columns? Or can you think of an easy way to make these subforms only be visible when the data exists? Maybe have an on load event for the subform?

View 2 Replies View Related

Tabs Control Help

Jan 25, 2005

i have one form with 4tabs with name frmMain and one button open form frm1.

if i close frm1 i want open frmMain to 2tab

can i do this?


thanks :p :p :p :p :p

View 1 Replies View Related

Hiding Tabs On A Tab Control

Feb 7, 2008

I have on one of my forms a tab control with 5 different tabs on it. Each of the tabs has a different set of fields but all from the same table. I was wondering if it is possible to hide a tab if none of the fields on it have any data in?

So for example tabs 2 and 3 have data on them but tabs 1, 4, and 5 dont. I would want to hide tabs 1, 4 and 5.

View 4 Replies View Related

Hiding Individual Tabs In Tab Control

Oct 10, 2006

Hello,

I would like to hide some of the tabs of my tab control on load, and make
them visible only later via another event.

How do I hide individual tabs vs. the entire tab control?

Thank you.

View 1 Replies View Related

Switching Problem Between Tabs On A Tab Control

Nov 14, 2004

I have setup a tab control with three tabs. Can I use a command button placed on tab #1 to switch the focus to tab #3? If so, how?

View 1 Replies View Related

Index With Tab Control + Weird Problem With Tabs' Captions

Mar 24, 2006

I' ve created an index (catalog) for the books in the database using a tab control and the code:

Private Sub TabCtl21_Change()
If (193 + Me!TabCtl21.Value) < 210 Then
Me.RecordSource = "SELECT * FROM tblBookTrackDetails" _
& " WHERE [tblBookTrackDetails.Details] Like '" & Chr(193 + Me!TabCtl21.Value) & "*'" _
& " ORDER BY " & Me.SortingTypeList & " ASC;"
End If
'for english characters chr=97
If (193 + Me!TabCtl21.Value) >= 210 Then
Me.RecordSource = "SELECT * FROM tblBookTrackDetails" _
& " WHERE [tblBookTrackDetails.Details] Like '" & Chr(194 + Me!TabCtl21.Value) & "*'" _
& " ORDER BY " & Me.SortingTypeList & " ASC;"
End If
If Me.Recordset.EOF Then
MsgBox ("There are no books for this letter!")
End If
End Sub

It works ok but please take a look at the attached image to see what is happening after clicking two or three times the index letters.

After the tab's caption is "erased", if I pass over the mouse is being corrected.
I tried the repaint and refresh commands but neither worked.
Can anyone help?

View 1 Replies View Related

Forms :: Not Able To Disable Navigation Button When Login Navigation Form

Nov 15, 2014

I am not able to disable NavigationButton when i login navigation form using login form. I am using MS access 2007 - 2010.i am using below code but getting error.

Forms![Navigation Form]!NavigationButton13.enable = False

Error
Run-time error '438'
Object doesn't support this property or method.

Any other method to disable NavigationButton.

View 2 Replies View Related

Navigation Control Of Form

Oct 22, 2004

Hello all,

I am in dire need of Access expertise. Basically, I have a form with many customer records. What I want to accomplish is to have a text box at the bottom of the form whereby I can type in a client's name which would change the record on the form to display that clients information. It would be nice if what I type into the text box doesn't have to match a clients name exactly (maybe use some sort of wildcard?). I have but a clue how to acheive this. Any suggestions would be sincerely appreciated.

View 1 Replies View Related

General :: Navigation Control With Query?

Jan 21, 2013

I have a form for testing purposes only it is named "Navigation Form". It has a tab called WorkingInitial. Within WorkingInitial I have a form called QueryTester. With a list box called List0.

Basically I want to click on the tab and the query to automaically filter based on the criteria I create. I dont want to have to create a bunch of forms with each seperte query. I want VBA to modify the Query.

This is what i have an I have no clue why it doesnt work or what I am missing.

Code:
Private Sub WorkingInitial_Click()
Dim strSQL As String
List0 = strSQL
strSQL = "SELECT * FROM [Table1 Query].[My.StatusInitial] WHERE StatusInitial = 'Working';"
End Sub

View 5 Replies View Related

Switch Forms But Same Record !?!

Jan 7, 2005

Here is an interesting one:



Have 2 forms, (1) Contact Information, and (2) Survey Response

Any Clues on how to set un a button to switch from Form to Form but stay on the same Record!!!! Interesting One!

Apriciate any help/clues/links =)

View 3 Replies View Related

Forms - Switch Between Records (Using VB)

Apr 3, 2006

Hi Guys,

You know on forms, you have those little Left and Right arrows (< >) at the bottom of the form, and you can click on them to switch between records... yeah?

Well, how can I make the form switch between records with VB. Lets say I want a VB script that jumps to the 5th record in the table, how would I do that? Normally you would just click the Left arrow 5 times... but I want to do it with code.

Thanks!

View 1 Replies View Related

Forms :: How To Switch To Correct Record When Switching Forms

May 7, 2013

I have a form called "Customer Details", on that form i have child forms, including one that has a schedule on.. so far everything seems fine, am able to get it to pull data correctly to the correct fields.. etc

I'm using 1 main table for all of this called "Cases"

Now the problem is, when i i click a button to print (this works so far), it opens another form and then fills in all the textbox's, however this is where i've got the problem, as it always seems to pull the data from the first record, not the record that i'm currently on..

so for example, if in the customer details, someone looks up "joe Blogs" using the navigation search and then wants to print it, by hitting the print button .. it should open another form, fill in the boxs and print "Joe Blogs", however it's always doing "Joe adams" - 1st Record

View 2 Replies View Related

Modules & VBA :: Navigation Control Subform Saving

Jul 18, 2013

Access 2010. one of the forms i load into a navigation form is in datasheet view and some vba re-sizes all the columns as it loads in.

However, this then means that when i try to navigate away to another form i always get prompted whether to save the form or not.

because the form is in a navigation subform i can't use:

Code:
DoCmd.Save acForm, Form_NavigationForm.NavigationSubform.Form.Name
' or this...
DoCmd.Save acForm, "my_form"

in both cases i get an error : the object my_form isn't open

View 1 Replies View Related

Forms :: Switch Value Based On Condition?

Aug 9, 2014

Is it possible to create a VBA on the AfterUpdate() that flips a value based on a condition?

For example, if in a text box (Gender) there is a value of "Male" and in a combo1309 the value is "No", can Gender be switched to "Female" automatically?

Code:

IF Me.combo1309 = "No" Then Me.gender....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved