I have navigation form with 2 tabs I'd like to limit access to users with certain type of account.
There are 2 tables in database that contains user names and types of accounts (tblSecurityLevel and tblUser), and they are used to set user name, login and security level.
It works this way: when you open form, it checks if PC name corresponds to name in UserLogin field (tblUser), if it does it gives appropriate access level depending on set user security, if PC name is not on the list user will be logged as guest.
So far, I used this code and it works great for limiting access to 1 tab:
Code:
Private Sub Form_Load()
Dim UserLogin As String
Dim userLevel As Integer
UserLogin = Environ("Username")
Me.TxtLogin = UserLogin
[Code] ....
Is there a way to expand the code and add second tab (or even third) with this table structure (I'd like to be able to keep login which 1st checks for pc name).
I have a form with a lot of data structured in tabs. Since the tab loads all the data at once while the navigation form browses to the desired form. I have tried but the issue is the Master-Child link. The form in the navigation form is not considered as a subform, hence, no way to set a Master-Child link. The navigation form itself is the subform but even when setting up a link there it has no influence on the form displayed by the navigation form.
I have set up my main data entry form as a navigation form with 5 tabs/pages. The first three all contain fields from my main data table, the other 2 tabs/pages have fields from related tables.
Ok, so my question is: is if there is a way to go from tab/page 1 through the other 4 in succession with the main primary key (in this case an object ID number) automatically populated through. As it is now, when I start a new record for an object on tab/page 1, and then go to the next tab/page, it registers a new record has been created (at the bottom of the form it updates the total amount of records entered), but I have to manually enter in the ID field at the top the object ID number that I am entering info for. Otherwise it is still showing the details associated with the last record I was in the form updating.
I have a form with 3 tab controls. Within each tab, there is a bound list box that lists records based on a combo box selection. All list boxes are bound to the same table and records in each tab will be in the same order.
I would like the same record be selected in each list box within the tabs, e.g. when record #2 is selected on tab1, the same record will be selected on tab2 and tab3, or if I click on tab 2 again and change the selection to record #3, record #3 will be selected on tab1 and tab2.
what is the best way and good practice in limiting user's access in form or report.For example, i have 2 users in my UserTable, one is Administrator and the other is just ordinary user.In case i want the ordinary user to open the form in "Read Only" mode, and the Administrator in "Edit" mode.
Do I need to make a code for each form to be opened or there's another easy way to handle this? (I am thinking for additional fields in UserTable to store their individual rights, but after that i don't know what to do next)
I am not able to disable NavigationButton when i login navigation form using login form. I am using MS access 2007 - 2010.i am using below code but getting error.
When I import a form with the Navigation control on it The following attributes of the navigation buttons are changed to #FFFFFF:
Hover Color, Pressed Color, Hover Fore Color, Pressed Fore Color
I was hoping to be able to automate the updating of customers databases by sending them a database which would export the required objects rather than the whole front end database. I can think a way around this by including code in the form so that it changes the attributes to the desired values, which are:
Accent 1, Accent 1, Background 1 and Background 1. But I would rather not have to do that.
It is interesting to note that the Border Color attribute is not changed on importing.
I'm wondering if it is possible to create a module to hide the navigation pane and document tabs? I know this is possible via the Access Current Database options however I'd prefer this to be done via an Auto Exec that runs the sub. (i already have it for the ribbon)...
Is there a way to minimize the navigation pane and the upper tabs on start up? I have several big forms that don't seem to fit unless these are minimized.
I have a 2010 Access Database with a Navigation Pane. When I click a Navigation Button to view another form I lose the position and record I was on in the first form. It's almost like the first form refreshed when I click the navigation button to view the second form. Is there a way to setup the Navigation form so when I click on various navigation buttons it won't reset the previous form I was on?
I'm trying to clean up a form a bit and have it only show certain subforms/graphs if the data exists. I already have columns in a combobox query to show an "X" for if certain data appears:
Now, I know I could build another query and have some system go through and identify these things, but the easiest thing would be to reference the "X" in the columns of the combobox. Is there an easy way to reference values in the other (non-primary) columns? Or can you think of an easy way to make these subforms only be visible when the data exists? Maybe have an on load event for the subform?
I have a tab control form with about 5 tabs. However when I move to the tab that has a datasheet form, the page moves down. You have to scroll up to see the above tabs. Is there something I'm missing on this simple tasks? Is it better to have it as a basic form for easier interface.
I'm trying to make a very simple click through data entry screen in Access 2007. For each record I want to have a standard form with three buttons at the bottom. Each button opens a new form (each form has a set of tabbed pages on it as there is lots to enter).How do I make sure that each of the additional forms populate the same record as the main form.
I am creating a database in which to store my data collected in my research. I have 8 tables that are linked by a SampleID number. I have created a form which has tabs, the first tab contains the information required for entry on table 1; how I am going to add the controls from table 2 onto the second tab.
I know how to make additional tabs and I have created a separate form for table 2 with the form wizard, cut and pasted the fields into the second tab on my first form BUT how to establish the source for those controls back to the second table. To make matters worse (of course not to be too dramatic here) I can see the other table in my Field List of related tables.
I have a master form named frmCustomer. I then have a set of tabs (not the navigation tabs) embedded within frmCustomer. The tabs are Invoice (frmInvoice), Contacts *frmContacts), Notes (frmNotes) and Orders (frmOrders). All form are Single Form. There is another form named frmInv that displays an invoice in a formatted manner. frmINV gets its data from a q1uery called InvQ.
It has a criteria that reads [Forms}![frmInvoice]![Invoice_ID]. I placed a button on frmInvoice that calls frmInv. If I run frmInvoice separately outside the tab the correct invoice displays. If I click the buttom from within the tab I am asked to enter the vale of [Forms}![frmInvoice]![Invoice_ID]. How do I call the frmInv form from the tab?
I have a tabbed form built in Access 2007. It's a series of about 32 different questions, with some being fill-in, some drop down boxes to select from, some radio buttons to choose a rating from 1 to 5. The reason I used a tabbed form was just to keep things consolidated on one screen where no scrolling was involved. All of the entries on each of these tabs are deposited into the same single table. I have 7 tabs, and all of the fields on the 7 tabs compose a single record in the table.
I have the actual tabs hidden, and instead use a button to switch to the next tab (Continue button at the bottom) once all the fields on that tab have been completed. I have all of the necessary fields set to be required, but Access does not validate the entries until the very end of the survey when they click a 'submit' button that actually saves the responses and returns to the opening splash page to start the survey again.
What I want to happen is for the fields on the current tab to be validated before it lets the user move to the next tab with the continue button. If they click continue and have left any fields blank they should get a message that all required fields must be completed or something similar to that.
I have found a thread here entitled "Form Validation before Moving to another Tab" which sounds similar to what I'm doing, but using the button method to navigate to the next tab, there is no BeforeUpdated event to assign that code to.
I have a single form with multiple tabs. At the top of the form appears the name of an individual and below the name are multiple tabs containing information specific to that individual. Each tab has a separate underlying table, which is the data source for the information contained on that tab.
As best as I can tell, I can only use one single data source (a query at the moment) to populate all the data that appears on all the tabs. Is there a way that I can have a separate data source (namely, a table) for each tab?
I have an Access 2003 database. I have a form with 5 tabs. I want to prevent some users from editing data on some of the tabs.
I added some logic to the OPEN property of the parent form but it does not work. "Object doesn't support this property or method." What is the correct way of controlling access of the data on the tabs?
In the logic below I first determine the user's permission for each tab. If the user has read-only access they will not be allowed to edit anything on this tab. There are 50 fields on the accounting tab and a subform. If possible, I don't want to have to specify each field individually in the code. Plus there are 5 tabs with numerous fields on each.
BTW: [add designer] is the parent form and [accounting] is the tab.
If DLookup("[permission_studentacct_ReadOnly]", "Users", "Contact_ID = " & Forms![Global]![UserID]) = True Then Forms![Add Designer].[Accounting].AllowEdits = False Else End If
I have created a new form with a few tabs, I need to let the value's of the last record be carry to a new record, but it must only show when I press the first letter on the new record, I did rerad about this, but only find it for normal forms. Did try to get it to work, but it dows not work on tabs form
I want to create a form that incorporates a number of different tables & tabs. When I switch tabs (which represent the information on the different tables) I need it to be consistent with the main table and all the information that follows it from the different tables.I've been told the best way to do that is with a parent form but I haven't been able to find an EASY step-by-step instruction on how to do that.
I have a main form with multpile tabs - each tab containing a different subform.
Link Master Field: ClientID (field in Master Form) Link Child Field: Client ID (field in all subforms)
There is another field that all the subforms (continuous type) have: ObligorName. All the subforms are based off of a huge table (subtable) with fields: Obligor Name, Address, Zipcode, City, DOcuments Required, Bank Account Number, etc......
Essentially, the user will fill in the 10 obligor names associated to ONE client on the first subform on the first tab + address + zip code + city.
When the user clicks on the second tab to fill out the next subform, I want all 10 obligor names to be there already, so then they can fill out Documents Required + BAnk Account Number.
If I fill out the first subform and then exit out of the form and then reopen it, the other subforms autofill.
HOWEVER, I dont want to have the user have to do this. It wastes a lot of time. What can I do about this so that the table is automatically updated right away. They are all based on the same table so I do not see why there is so many issues.
I have a Main (Home) form that has a sub navigation form (frmNavigationSubform).Need to access 3 forms. Forms 1,2 and 3. Also, have 1 options form.
Subform has 2 Navigation buttons. NavigationButton2 and NavigationButton3.
NavigationButton 2 Navigation Target Name = 1 (frm #1).
NavigationButton 3 has no Navigation Target Name. This is passed on when user picks Option1 or Option2 form options pop screen.
Now I can pass the name to the Navigation Buttons2 but the subform does not show it. I have to click on the Navigation Buttons2 again for it to show. What I want is when the user makes the choice in the options screen the name is passed and form 2 or 3 should load/show.
We have a database with one main data entry which stores records in a seperate table. There are several thousand records keyed in using this form. Therefore, alongside the entry we have a search form which allow the user to search for a specific record and display it in the main if he/she needs to edit one.
We have received a request from users for a functionality which allows users to browse all records, using the main form layout, that they have keyed in. I guess what I am asking is: Is there a way to limit the records visible in a form using field on that same form as a limitation (ie. the users name - which is a required key-in)?
New to the navigation form: I need several forms in the navigation form to all relate to the same client ID field. I have this information on the main form but the form with in the navigation form will not pick it up.
I have tried =[Forms]![Frm Client Information Navigation Panel]![ClientID] But just cant get it to pick up that information...
I would like to have something like the master link fields and, child link fields but when I add a form to the navigation form this option in not available.
