I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
I have a non standard size report (for printing labels)
The report is just over 10cm wide and just over 15cm deep.
I have solved the blank pages caused by exceeding the width but I'm still getting a blank page when I move some data down. I am still within 15 cm but it's throwing me a blank page. Even if I extend the in design mode depth to say 20cm (ie the height in Detail) it's throwing a blank page (I can see this in print preview).
I initially set up the report (it's a long time ago so memory fades) using the label wizard setting up a label 4*6 inches (10.16 * 15.24 cms) and it is this i'm trying to tweak. Is there a property I'm missing somewhere?
After having designed a series of forms, I have just been told that users would like to occasionally print the data. On testing this, it seems that the data does not print onto 1 page. Are there any settings to fit data to 1 page wide only?
Aternatively, is there a better way of doing this? Perhaps by using a report or something like that? The form has a whole load of calculated fields (calculated control boxes with expressions) so would I run into any problems doing it ths way ?
I have a form, combo box selection, when i make a selection, all the info is good on all my tabs, which holds the subform.My issue is, on one of the subform, it's a data entry form, where I want it to be on a new record page. instead it list all records. I want my users to see a blank page, but have one field populated. is this possible?
1) blank data entry page, but with a populated field?When a CU Name is selected,I want the (Enter Note) tab to go to a data entry or last page or new page.I have tried putting it to data entry form, but the CU Number will not populate.
to automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.
I have added the Allen Browne Calendar 2k control to my form.
My form consists of 4 pages. On pages 2 and 3 I have subforms and on page 4 I have Personal data. Page 1 is general data and the Calendar is on Page 1.
What is happening is that the Calendar is also being displayed on my 4th page, in the same position as page 1. When I try to move it, cover it or delete it from page 4, it is also gone from page 1.
I have a form with six tabbed pages on it. Since data entry follows in a logical order I would like to put a command button on the bottom of each page (subform) that can be used to go to the next page. What I am going to though? If i put a command button (open form) then it opens the whole form not as a subform on a tabbed page. if I try and put a command button (open page) then it will not let me enter the page number. Hope that makes sense! Any ideas
I have created a report in MsAccess for a typical stock ledger page as is shown below:
ITEM MODEL: XYZ
TRANS DT <------- RECEIPT -----> <---- SALES ---> BAL DATE INV No INV DATE QTY INV NO INV DT QTY QTY 25/05/07 0278 27/03/07 10 ---- ---- ---- 10 25/05/07 ---- --- --- 07/01 25/05/07 4 6 26/05/07 ---- ---- --- 07/02 25/05/07 6 0 26/05/07 0291 12/05/07 27 ---- --- --- 27
I wish to print the stock ledger from one transaction date to another with the last balance qty appearing as the first row with the “brought forward” message. The report would look like this:
TRANS DT <------- RECEIPT -----> <---- SALES ---> BAL DATE INV No INV DATE QTY INV NO INV DT QTY QTY Brought forward 6 26/05/07 ------ ------ ---- 07/02 25/05/07 6 0 26/05/07 0291 12/05/07 27 ------ ------ ----- 27
There are about 100 record in my excel sheet and the i have import report by linking from desktop for updating purpose. when i tried to print report its result came not as i desired.
These words i like to print on last page of report but the words like:
( Cheque writer Accounts officer Zonal accountant) print on each page.
How can i print these signatures at the end of last page.
I have a problem which occasionally surfaces. When trying to use an edit form nothing comes up but a blank page. No fields, nothing. The database is split and when I open it. It shows as read only. The database is only used by myself and another and the other is not accessing it. I've tried closing and opening the database and also compacting and repairing but there is no difference to the particular form. the problem is cleared up the next day when the db is accessed again. All other forms are ok to use, and there are now 2 forms which this happens to. Has anyone experienced or seen something similar?
I wish to print the stock ledger from one transaction date to another with the last balance qty appearing as the first row with the “brought forward” message. The report would look like this:
TRANS <------- RECEIPT -----> <----- SALES ----> BAL DATE INV No INV Dt QTY INV NO INV Dt QTY QTY Brought forward 6 26/05/2007 ------ ------ ---- 2007/0002 25/05/2007 6 0 26/05/2007 0291 12/05/2007 27 ------ ------ ----- 27
Hi, I have a two page report (it is formatted to always be exactly two pages) and I need to print it on the front (page one of the report) and on the back (page two of the report) of the same piece of paper. The less user input the better.
Is this an Access thing or a printer thing (We have a HP 6P).
I have a database of musical events. Now im creating flayers for each event. My Q is how the Information for each event should fit on one A4 page and should start on a new page of the report.
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
I have a complicated report in which there is a main report which contains other reports within it. One of these reports (call it "Number Six") within the main report has several subreports. Within this report, I can successfully cancel the subreports so that they do not print if the data does not match the right criteria. I use VBA code to cancel the Number Six report if none of the subreports will be printing. Nothing then appears on this individual report. All I get is a blank page which makes sense since I've shrunk all of the subreports.
When the main report prints, the Number Five report prints, there is a blank page for the Number Six report and then the Number Seven report prints. How do I get the main report to not print that blank page for the Number Six report? When the Number Six report will result in a blank page, I want the Number Five report to print followed by the Number Seven report. I've tried using "No" in the main report for the Enabled option for Number Six but the blank page still shows up. I am not forcing any page breaks either.
I have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.?? (Actually I would also like any State that continues to a next page to not just have the state name but something like " Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska Ancorage Prudo Bay
California Whittier Anaheim
Colorado ------------------------Page Break --------------------------------- Denver Pueblo Colorado Springs
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
I have a report that's oriented landscape. I have scaled and placed everything to fit on a 11" x 8.5" page (the current dimensions of the report are 10.375" x 7.75"). The Layout view shows that everything fits within the borders.
Despite all of this, Print view insists on including a second, blank page. And since the general user will initially be viewing it in Report view (which doesn't indicate 2 pages), then printing if they so desire, they won't know there's a blank page.If not, I'll just tell people to make sure to only print page 1 in the printer dialog box.
I have an access report that consists of numerous other subreports. My issue is that one last blank page prints at the very end of the report. All margins are sized correctly and have set the 'Force New Page' setting to 'None' for all Group Headings (I should mention that I have each subreport within it's own group heading...so a total of 8 subreports in 8 group headings). The odd thing is that I have the page #'s printing in the page footer and on the last page it's printing page + 1 of x pages (e.g. page 129 of 128). I have removed the report header and footer, but have the same result. None of the other subreports produce an extra page when run separately.
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
I have a DAP that many users have access to.When opened the Dropdown is blank on some peoples and populated on others. Is there some setting that can cause this. I have checked to make sure that they have the allow ActiveX Controls to run files on this computer checked. Any other setting that may cause this? Thanks.
I am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer) If Page = Pages Then Me.[TextBoxName].Visible = True Else Me.[TextBoxName].Visible = False End If End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer) Me.PageFooterSection.Visible = (Me.[Page] = 1) End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.