Forms :: Open Access In Design Mode From Within Access
Jul 23, 2014Can I for instance while my db is open, open it in design mode from my form via code?
View RepliesCan I for instance while my db is open, open it in design mode from my form via code?
View RepliesI have an application that when in design master shuts down when I attempt to open a certain form. I have traced the problem to a linked field from another table, by creating a new form and ommitting the said field, problem is its a required field!
If I copy the database (Backup) and run it as a replica it does not happen, if I then convert the replica to design master it happens.
Any suggestions please??
Steve
I have several subform tabs and one that I have updated no longer shows up when I run the form on Form mode. The tab is there but no content or details of the subform
View 3 Replies View RelatedI'm working on a login form and *not thinking* I removed access to the submenu. I had already set the form up so that you either login correctly or exit the program. I'm working in code for the form and I know it's possible to reactivate the menu in code, I just don't know how. And I can't switch to design mode. The form is set up to not allow anything to happen until the correct login has been entered, and I either had a typo when I set up my test login or the program is bugged and only says it's incorrect....
View 1 Replies View RelatedI am writing a program that allows users to enter customer info and I want to be able to pop up a window that will search for Postal (Zip) codes using the Postal Service URL. (I would like to position the popup so that the contents of the Address and Postal Code fields are still visible on the form). I would also like to know if there is a way to copy the contents of the Address Field in my program to the Windows Clipboard, using VBA code, so that I can paste it into the Postal Code Finder without highlighting the field contents and pressing Ctrl-C.
View 2 Replies View RelatedI have a form which was locked down (ie Allow additions, allow edit and allow deletions were all set to no) on the Form property. I want to change this to allow edits so in design mode I changed the Allow Edits property to Yes.
I then went to Form view and was able to update fields on the form. When I exited the form it asked me if I wanted to save the changes so I clicked yes.
On going back into the form I can no longer update the fields I could before. Going into design mode I can see that Allow edits on the form property is set to no again.
What is happening here. There is nothing in the on load or other events to set this to no, besides this shouldn't change the form property should it?
I know I can get around it my setting the property in the form itself but why is the property getting reset in the first place.
Access 2010.
Without having made any changes to my setup, Access now crashes when I try to open a Macro in design view. I have checked the Trust Center and the folder where my database is stored is trusted (including sub-folders).
I am running Office Pro 2013 with Windows 8.1.
I am going into the Form Design mode
Click in the subform
I then set tab order by selecting the box and moving the field up.
Looks correct and then I click okay.
The subform does not change.
I go back into design mode, click in subform and select tab order and it looks correct????
I have a form/subform that requires some fields from the Switchboard for its criteria. Last week due to no action on my part, it started asking for those values as Parameters instead (Forms!Data!txtInspDate), etc! The new form loads, but of course it is blank with no data. This happens if I load it from a command button or from the navigation sidebar... UNLESS I first load the switchboard in Design Mode, go to VBA window, then reload the Switchboard in Form Mode and press the button. From then on until I close the database, everything works fine!
View 9 Replies View RelatedI just finished a small Access-2013 database (accdb format).
Now I want to make it available to users.
How do I make an 'executable' (meaning that tables, forms, ... cannot be opened in design mode)?
My issue is that one of my queries can be run, opened in SQL view, but not opened in design view. When I attempt to view in design view, Access freezes and I am forced to close the program. My database is split, FE on my local, BE on another computer on my LAN.
Below is the SQL, I tried to just copy and paste this code into a new query and I encountered the same issue.
Code:
SELECT tbl_SurveyJobs.job_number, tbl_JobTypes.job_type_description, tbl_Clients.company_name, tbl_SurveyJobs.start_date, tbl_SurveyJobs.end_date, tbl_SurveyJobs.comments, tbl_SurveyJobs.contact_notes, tbl_SurveyJobs.regplan_number, tbl_SurveyJobs.sheet_number, tbl_SurveyJobs.mplan_number, tbl_SurveyJobs.lot_block, tbl_SurveyJobs.township, tbl_SurveyJobs.concession, tbl_SurveyJobs.township_lot,
[Code] .....
I have had to use my first crosstab queries.
I now understand that when opening and saving crosstab queries Access (2010) runs that query to ascertain the column names. Unless you hard-code them. Running the query takes at least 20 minutes.
I have hard-coded where I can, but one report takes arbitrary dates so I can't hard-code them.
I believe that turning off AutoCorrect might make a difference to whether the query runs - but I don't want to turn it off.
I would like to add a cross close command on the tab in tabbed documents mode. Is it possible to accomplish?
View 2 Replies View RelatedI have a button using a macro to open a form in Hidden mode. Then I have another button on another form to open this form that was hidden.
When I open the form, the form is virtually blank apart from the form caption name. But when I close this and press the button again the form opens as normal.
I do not understand why?
I was told that once you hide the form and when you open the form again, it should appear normal. Why do I get this blank form??? Only by hitting the button again then the form is normal....
Im trying to work on an db in Access 2007 that was migrated from Access 2003 (in fact its been migrated several times starting from Access 97). It executes and runs with no problems in both versions.
The problem is when trying to open some queries (not all) - Access is unable to open the query in design mode and gives me this error :
" is not a valid name. Make sure that it does not include invalid characters or punctuation and that it is not too long.
However, as I cant open it - I cant check it. Im pretty sure none of the fields have invalid characters (they do have spaces) and Im not sure how long is too long....
I have several comboboxes in my database from which users select values. However, in most cases, I do want to give them the option to add an item that does not appear while simultaneously updating the underlying table which stores those dropdown values. I have made use of the builtin "allow edit list items" feature of Access 2007 but the form always opens on the first record of the form on which they are to add the new item. Is there a way to specify that it should open in Data Entry view apart from using VBA?
View 4 Replies View Related(Forms) How do I insert a Page below the Detail Bar?
View 3 Replies View RelatedIs possible to export design ppt to a access form?
View 1 Replies View RelatedI have a access form that has a text box that holds a search term. The search term is used as a variable in a query. The query results populate a list box. Selecting a result in the list box populates the rest of the form where the record can be edited. All of that works great...sort of. When first opening the form you cannot view any records. The search function works fine and the list box populates but selecting a record does not populate the rest of the form. Attempt to navigate (next, first, etc.) and you get a "You can't go to the specified record" dialog. There is a simple fix for this. Open the form as normal. Then switch to design mode. Do absolutely nothing. Switch back to form mode. All is well.
View 1 Replies View RelatedAccess 2013 on Windows 7 ..I have a Main Switchboard form which is Pop-up and Modal. Everything on it is working as required, but if I am in Design View and try to switch directly to Form view, the form disappears and the Access screen freezes - the mouse moves, but no menus or objects can be selected. If I have the VBA window open, I can carry on working in it, saving the modules and closing that window as usual. But the only way to open a form or do anything else in the main screen is to kill Access by closing the Access window in the system tray (or using the Task Manager).
If I close the Switchboard when in Design view and then open it in Form view, everything's fine.
The only recent change I can think of is upgrading from a 32-bit implementation of Access to 64-bit.
I have an old db. I would like to see the forms and tables so I can select them and make changes. I know there is a way to access those items on startup but I have forgotten how. When I bring up the db I see a form and I can get into VB for that form but I cannot see any embedded table, forms reports, etc.
View 3 Replies View RelatedIs there a way to allow edits to the properties of objects/controls only in Design view and not in the Form View?
View 2 Replies View RelatedWhen I click on the design mode of a query object, generally MS Access defaults to the GUI design view... but in this one application, the design view is pulling up queries in SQL mode first...
If I want to set it to the GUI design mode, I have to either hit design again or run the query then hit design to have it pull up in the regular design mode. Is there a setting or something I am missing? Seems that it only does this when the SQL code is reltively involved (i.e. the simpler queries pull up in the normal design view.
Hi.
Other than manually moving fields in a table in design mode, can I get the fields alphabetized?
Russ
I want to extract the integer part of a string data as a single field.
How to apply self-defined function in Query Design Mode?
any hint is appreciated, thank you in advance~
Hi.
I have put much time in designing a form.
After exiting and saving it, I cannot now open it. Only the Page Header shows, and I cannot get into 'Design' mode. I have tried repairing and compacting to no avail.
Any ideas?
Russ