I am trying to have cascading forms running on my database. The first form adds a new staff member. When you press the next button this happens...
Private Sub Command12_Click()
DoCmd.Close
DoCmd.OpenForm "Frm2"
End Sub
But I want it to open Frm2 using the ID from the previous form. The stumbling block for me is I close the first form before opening the next so I cant pass the ID across.
I would like to be able to keep the textbox value or store it in a variable so that I can get that value out whenever I jump from one form to another?
The only way I know is storing this on a temporary table somewhere..
I'm trying to design a simple wildlife tracking DB, so that when myself or my colleagues spot an animal we can enter its ear tag number via a form. That will either bring us up a list of previous dates/locations that animal was observed, or if it's not in the DB, allow us to enter the new animal and location.
I have two main data tables:
dt_Animal- which stores the ear tag info, species, and other information about that unique animal
dt_Sightings - stores info on when/where animals been seen (linked to dt_Animal in a one-to-many relationship, of course)
What I want is that when you open up the form, you get a box (text or combo) to enter the animal's ear tag number.
- If it already exists in the DB, it brings up all the info on that animal and its previous sightings - with the option to fill out any missing info and (of course) to add a new sighting - and it WILL NOT add a new record to dt_Animal - just to dt_Sightings
- If it DOESN'T exist in the DB, it creates a new record in dt_Animal and allows you to enter any/all of the other information
Where I'm running into problems is that I don't want duplicate records in dt_Animal - each animal is unique. I haven't found a way to set up a form so that you don't get pop-up errors if you're typing in an ear tag number that's already in the system.
I've tried various tactics involving simple coding (NotInList, etc.) that I pulled out of this forum and other places, but haven't had any luck.
I'm fairly new to databases and have been attempting to build a multi-table database. It's not properly rationalised, but I wanted to test run it to ensure it was fit for purpose first.I've built my form, which is pushing data out to several tables, but I cannot seem to get the form to pick up previous records.
View 3 Replies View RelatedI've inherited an Access 2010 database that needs tweaking. I have a form, let's call it CALLED_FORM, that is loaded from various places - ie there are quite a few places that do the following
DoCmd.OpenForm "CALLED_FORM", , , , , , coupleofarguments
This works great when called from most places but if it is called from 1 specific form there is a likelihood that some code is executed that shouldn't be.
So I want to be able to do the following
In CALLED_FORM I want to be able to skip some code if the previous form is say FORMX. For all other forms I want it executed. E.g.
If PREVFORM <> "FORMX" then
code
more code
even more code
End If
Is there a system variable for PREVFORM.
I know I can change coupleofarguments to threearguments and pass something over in that to show which form it has been called from but that is a bit difficult.
I have a form where the user clicks a button (button 1) to open a modal form, the user then enters data into this form and clicks close.
Then back in the first form I need to find which control had focus before (button 1) was clicked.
Screen.PreviousControl returns a control on the modal form.
I hope its easy like Forms!FirstForm.PreviousControl but I can't seem to find it!
I have a big table, EquipmentDetails and separately I have job plans.Job plans can have many pieces of equipment. I store the relationship in EquipmentDetails_JobPlanDetails, but am feeling frustrated as I can't seem to get Access to build the SQL query from this in the way I want.
I am generating a List Box in a form which is populated from a query.The query calls on a table which lists ItemID from EquipmentDetails and JobID and in the current form (where the list box is) I want to pick up and display the ItemIDs associated with that JobID. The current JobID reaches my form correctly (I've proven this by displaying it in a text box) from the previous form.
The problem I have is that I can't seem to get the SQL query to only get ItemIDs that are linked to the current JobID. No matter what I try, it either gets all of the ones in that table, or I can't compose one.What kind of SQL do I need to only grab the ones relating to the current JobID please?I've tried building it in the design view but it says that it can't do it because the outer joins are ambiguous.
In my database scenario, a patient would see a doctor and the doctor would check off fields in a form representing different disease symptoms that the patient has to calculate a final score (for ex. if the patient has 2 symptoms, the final score would be 2).
After a few months, the patient would visit the doctor again, and the doctor will have to fill out the same form, adding any new symptoms the patient might now have. I would like to have the disease symptom fields checked off in the previous visit automatically show up in the new form, so that the doctor only has to add the new symptoms, and then recalculate the score using both the old and new data (for ex., if the patient had 2 symptoms before and 3 more symptoms now, the score would be 5).
I wish to highlight some fields on a form if their value differs from the previous record.
I'm OK with the code to determine this, but unsure as to where to put the code to set the fields initially?
I have two strings txtPrevPayment_Method and txtPrevProduct.
Where can I set them 'once' to be the same as the first record loaded in the form. Then in the Current event I check if they have changed and set font colour accordingly.
Ok, this is what I have, I have a database that has 3 tables, a year table, that all my forms get inputted into, a table that has manufacturer addresses on it and a table that has sampling locations.
On my form, I have it where there is a drop down box, so you can just select the name of the manufacturer and select the name of the sampling location. But what I want it to do is, that you select the name from the drop down box and then in another box or two it auto populates the corresponding street address, and city for both the manufacturer and the sampling location.
I am tasked with creating a scientific database of fish catches at various different sampling stations. I envisage the entry form having hierarchy levels, ie year, season, date, sample station, species caught, and then the specific associated data with each species (weight, abundance, length etc) will form each distinct record.
In each year there are 2 sampling seasons. In each sampling season there are up to 20 dates on which samples are taken. On each date there are up to 50 sample stations recorded. And at each station up to 20 species can be recorded.
In order to enter each species caught in a survey, the end user will potentially have to fill the season box with an entry 40,000 times. For each season there will be 20,000 date entries to be made. For each date, 1,000 station code entries, and 20 species entries for each station. What I would like to happen is this.
When the end user is entering the data, he or she will be working through the hierarchy from the ground up. Ie., they will enter a particular species' data (abundance, weight, length etc) at a particular station on a particular date during a particular sampling season. The next entry will be a different species at the same station on the same date during the same season. I would like the duplicated information from the previous record to be copied across onto the new one so that all the end user has to do is enter the species name, abundance weight and length data.
Once they have finished entering all the species data for that particular site, they can move onto the next site which they would fill in the data themselves for the station code. So, in the hierarchy, the first button would copy all the previous data except the species name and associated weight length abundance data. The next button would do the same, except leave the station code blank. The next button would leave the species name, station code and date blank. And so on up the hierarchy. The end user would be able to selectively choose which data is copied over by using these buttons, saving lots of potential extra work doing repetitive entries.
I have a 2010 Access Database with a Navigation Pane. When I click a Navigation Button to view another form I lose the position and record I was on in the first form. It's almost like the first form refreshed when I click the navigation button to view the second form. Is there a way to setup the Navigation form so when I click on various navigation buttons it won't reset the previous form I was on?
View 1 Replies View RelatedI currently have two forms: frmE_SAFind and frmE_SAOrder
frmE_SAFind shows results from a query including fields [txtIDPO] and [dtmDate]
Example:
IDPO Date
btnOpnFrm 6543 2/1/05
btnOpnFrm 5681 1/1/05
frmE_SAOrder shows order details including [txtIDPO] and [dtmDate]
I have a open form command button set up on [frmE_SAFind] that opens [frmE_SAOrder]. Is it possible for me to modify its properties so that when the open form command button is clicked, the order details in [frmE_SAOrder] will represent the order that the user is selecting via the btnOpnFrm command?
Example: If I click btnOpnFrm for 6543, [frmE_SAOrder] will show me PO 6543 details.
Hopefully I made myself clear enough to understand. Thanks for your help!
I need to create a production forecast form based on previous sales history.The history is based a sales and grouped by month & year
So on the form, which needs to be a continuous form, I want products to show as rows and months as columns The sales history per month needs to be displayed as well as a field allowing to user to enter the production forecast.
I can write the sales history to a temp table.However I never know how many months history the user is going to want displayed at run time. Could be 3, 7, 12 or 15!
Attached spreadsheet shows what I am trying to achieve. Is this possible and if yes, how would I do it?
I've recently decided to move a database that had all its information on 1 table and divided it into multiple tables.
Attached is the relationship as well as the form.
The issue I have is that when I click the form, it only shows a blank record with none of previous records.
Data entry is already set to NO. I'm wondering if it's an issue with my relationships, tblStudioDescription is the parent table and the others are child tables so I linked them with the ID and set referential integrity.
I am following mice and am trying to build a form that lets me add a new mouse to the database. I want to be able to either enter the the unique mouse id of the mother if I know it or be taken to another form that lets me identify the mother from the females already in my system. I know this is possible because I have seen examples of it where, in the find mother form, I give the strain name in a combo box which narrows down the selection of mice in the DOB combo box which in turn narrows down the unique mouse id which is the information I really want. I then want to carry that id back to the original form to enter it as the mother id.
In an ideal world the database would recognize this id being put in for a mother and note in the mothers record that she has had a litter. The litter id, which I am currently composing of motherid&fatherid&DOB, would go into the mothers record.
when i open a form i want to open another frm at the same time. i have a main form with some buttons in it. when i click on a button and a form opens then i am not able to click on a button to open other forms from the main form.
View 2 Replies View RelatedWhen entering information into a blank form, I would like to be able to continue entering information to another additional blank form after my last entry. Is there a way to continue to a blank form after entering information into the previous blank form? I would just like to continue without having to close the entire form and then reopening another form.
View 7 Replies View RelatedI have a fault form which the user enters details of a fault. When the fault form is submitted the data is saved in the relevant table and the form is cleared so that the user can enter the next fault. On the fault form i have a subform which displays the faults previously entered by the user. I want the user to be able to click on an entry in the subform and open the orignal fault form and see the data that had been entered. How can i create this functionality??
View 9 Replies View RelatedBasically I have a Customer Form, which I have a New party button on it,this button opens up the party form to a new party, what I would like it to do is open up a new party but make the new party for the customer I had selected in the previous form.I have tried the GoTo macro's but cannot seem to get it to work.
I am thinking on clicking the button it will need to get the Customer ID, and then open the party form, create new party, and paste in the Customer ID, which then updates the Name - Date - Address - Company Fields.
I have several forms that open in the middle of the form instead of at the top in the first field. Any ideas to correct this problem?
View 2 Replies View Relatedhow to give the option to open either forma or formb with a command button.
View 1 Replies View RelatedIm using the below code to open a from depending on what option is selected on a combobox.
Code:
Private Sub DirectPCombo_Click()
Dim cboVal As String
Dim stDocName As String
cboVal = Me.DirectPCombo.Value
Select Case cboVal
Case "One"
[code]....
If you select the first item [One] it will open the correct form [TestOne]. But when you select any of the others an error comes up saying that the name is no a form. So I added
Code:
DoCmd.OpenReport stDocName
But the no items would select.I know If split the reports form the forms and make two comboboxes it would work, but it would be better it both could be in the same combobox.
I have a continuous form that is based on a query. I would like to have an open button so that you can select a record on the form and that particular record opens up in a new form. How do I do this?
If this cant be achieved would I be able to make a form open that shows a particular record based on the query and you just press next record to view the other records that are a result of the query?
I have a main form. It's only contents is an unbound combobox, and it's used to filter down (via a query) the details in it's sub form (I'm using it to load different account information, rather then type it in all the time).Anyway, I also have another form (Dashboard, or mainmenu) which summarises activity within Each account and is displayed via a datasheet.
What I'm trying to do is double click the accountname (on the main menu)which will then open up the necessary form and load the value from the datsheet accountname, in to the newly opened forms cbo, where I can apply the form to requery on load.I'm going to have to DIM the value, and docmd.openform etc...
How to make application such that only a form is opened (not as a tab in access) just like pop up feature of a form. i have only one form in my application...
View 2 Replies View Related