Forms :: Open A Subform And Display Last Bottom Record

Jun 27, 2014

I got a form / subform relationship.how to locate the bottom record, when the user after some queries input at the main form. I desire to display the bottom end record (EOF), instead of some sorting and display the last record at top of the subform!!

View Replies


ADVERTISEMENT

General :: Open Datasheet With Last Record At The Bottom Of Page?

Sep 18, 2014

Is there a way to have a datasheet open with the last record at the bottom of the page? I now have it opening to the last record, but it has the last record at the top and can't see the records before it without scrolling.

View 2 Replies View Related

Forms :: Subform Black Bottom Edge

Jul 25, 2013

I'm finishing off a database project and would like to do some final tidying up. I'm using subforms on some forms and these subforms show a black line on the bottom edge, I would like it to be white so it blends in with the back and the user doesn't know it's a subform.

Is there any way to do this?

View 2 Replies View Related

Forms :: Open A Form For Adding Child Record Related To Highlighted Record In Subform

Oct 2, 2013

Is it possible to open a form to add a child record related to the highlighted record in the subform?

View 2 Replies View Related

Forms :: Display Record Count From Subform In Tab

Jul 1, 2014

I have a form that contains a number of tabs, each tab then contains a subform. The basic gist is that there are clients and each client chart needs to be audited to make sure that the every clients chart has all of the correct information in it. So if for example, each client needs an initial treatment plan, there would be a tab called Initial Treatment Plan that would contain a subform (continuous form) displaying all of the clients that are missing this information.

I would like to display the number of records that are being displayed in each subform in the tab next to the name to make it easier for the auditor to know how many which tabs have content to be updated. For example, if there are 10 clients that are missing their initial treatment plan, the tab would read "Initial Treatment Plan (10)".

I was able to get a total number of rows in datasheet view, but I don't know if there is a way to have that field as a hidden field in continuous form view that can have its value displayed in the tab.

View 6 Replies View Related

Forms :: Subform Needs To Open On First Record

Jul 27, 2015

I have a series of combo boxes on subforms whose control sources are fields in a table that has a many-to-one relationship to the main case-information table meaning that there will likely be several records for any case. I need each combo box to open onto the first record for each case rather than create a new record. I've seen code that does this, but under somewhat different conditions, and my VBA skills are too rudimentary for me to be able to adapt the code to my needs.

View 7 Replies View Related

Forms :: Subform Datasheet Record Selected Display

Dec 2, 2014

In Access 2010, if you have a form with a subform in datasheet view, and you move the focus away from the subform, how can you tell which record(s) on the subform are selected?

When the subform has the focus, the selected row is shown with a blue/grey tint. But as soon as the subform loses the focus, this disappears and all rows look identical.

Its an issue as I have 2 datasheet subforms on my main form, with the 2nd showing records related to the record selected in the 1st. But as soon as the 2nd subform receives the focus, it is impossible to see which record in subform 1 was selected.

I have tried conditional formatting, but that does not work.

View 1 Replies View Related

Forms :: Auto Height Of Subform Based On Record Display

Nov 16, 2013

i have a subform name(SUBSAL)in this subform i get reocrds for some employee as select combobox Name(CMBEMP).some employee having 2 record or some having 6 record as their transaction

i have sum of transaction at subform footer field but when only 2 records shows in subform it shows a major gap or blank space in subform detail section.

View 2 Replies View Related

Forms :: Getting Subform To Open To A New Record When Button Is Clicked

Mar 3, 2015

I have a subform [ctrlLogDetail] on a parent form [incidentdetails] that is opened by the user when they click on a button on a navigation form. These forms are used for a variety of purposes. The problem I'm having is that the user needs to be able to select an incident number and go to the appropriate form (I accomplish this by using this code: DoCmd.OpenForm "IncidentDetails", acNormal, , "Activity_ID = " & Me.cboINum in the on click event of the button.) This works appropriately. The subform is also appropriately linked to the parent form.

I need an additional line of code to have the subform go to a new record when the form opens to an existing incident number. Since I use this form/subform when doing different tasks, having the Docmd.RunCommand acCmdRecordsGoToNew in the Form on open event isn't optimal.

I only want the LogDetail subform to open to a new record when the user wants to add an entry, but not when they need to edit a specific entry. What is the appropriate syntax to use either in the openargs event of the openform command or elsewhere in the procedure so that the gotonew function on the subform only occurs when this button is clicked? I'm having difficulty getting access to understand that I want the subform to open to a new record but not the parent form.

View 1 Replies View Related

Reports :: Display Total At The Top Of Column Instead Of At Bottom

Mar 15, 2014

I have reports that total the figures in a column and displays the total at the bottom of the column. I would like to display the total at the top of the column since the length of the column continues to grow and I would like to see that total before scrolling down to view the various individual entries.

No matter how I try the =count(x) always shows an error. Is it not possible to display the total figure at the top of a column instead of at the bottom?

View 1 Replies View Related

How To Display Totals At Bottom Of Query Or Report

Sep 11, 2014

I have some columns with hours. I want to simply display the total below each column. I would like to do this in the query results and in the reports that I create.

View 1 Replies View Related

Forms :: Display Data In Form As Select Record In Subform In Data Sheet View

Nov 11, 2013

i have a main form named(EMP) i have a subform named(SEMP)with EMPID i have an another form Named(SDetail) with EMPID i want to open form Sdetail with filter records for data select in subform (SEMP) ,EMPID field Subform SEMP in as datasheet view. i can open sdetail for selected records only

View 14 Replies View Related

Forms :: Subform Scroll Bar Scroll To Bottom?

Apr 25, 2013

I have a form and in the form is a subform. When I add a record with the following code, the subform detail scrolls in such a way that you can't see the record you just added...only a single blank new record. Can you set the scroll position so that I can see all the previous records including the one I just added?

Private Sub Add_PROJ_RECORD()
On Error GoTo Err_Add_Click
Me.PROJECT_DATA.Locked = False
Me!PROJECT_DATA.SetFocus
DoCmd.GoToRecord , , acNewRec
Me.PROJECT_DATA.Form.PROJ = PROJ_COMBO
Me.PROJECT_DATA.Form.SPEC = SPEC_COMBO
Exit Sub

View 2 Replies View Related

Open A Form And Display Last Record

Mar 29, 2005

Hi,

I've searched for this but can't find how to do it, When I open this form I want it to display the last record in its control source, This is probably a simple one but I just can't seem to make it happen...

Thanks

Ryan

P.S. This is what i Have so far...

DoCmd.OpenForm "frmAbout"

View 2 Replies View Related

Open Record In Main Form By Clicking Record ID In Subform

Dec 16, 2014

I am creating an events database. In my main form, I have all the details of a single event (billing code, fees, customer, support personnel, etc.). Then, I have a subform (form view) that lists each of the other services which share an event ID (this ID comes from a separate, unrelated events management suite). In the subform, I display the most-commonly-edited fields so that they are editable without navigating to a different record.

However, there will be instances where it becomes necessary to navigate to one of the records listed in the subform. I would like to make this a quick process by just clicking on the primary key in the subform, and have the corresponding record appear in the main form.

In my searches I've found a common suggestion to use a DoCmd.OpenForm method where the form opens to that specific record -- in effect filtering by the primary key number. I don't prefer this method because it disables the ability to navigate to other records using the previous, next, find records, (etc.) buttons without closing and re-opening the form.

Is there a way to make the main form 'jump' to a specific record by clicking on a control in the subform, without limiting the ability to navigate in the main form?

View 10 Replies View Related

Forms :: Calculate Subtotal On Subform And Display On Upper Subform

Jun 20, 2013

im having problems getting a subform to calculate another subform's total and display it as it keeps coming up with the #NAME?.Basically my database is like this

tblCustomer
- tblOrders
- tblItems

and this is displayed on a form. so you can flick through clients, then flick through the orders and its broken down into the items inside each order.i have seen many answers that are only about calculating something on a subform and displaying on a form but this does not work when displaying on a 'parent' subform. the form structure looks like this

frmCustomers
- sFrmCustomerItems
- sFrmCustomerOrders

i have a calculated control textbox in the footer of sFrmCustomerOrders with sums up all the prices using =sum([Price])and in my sFrmCustomerItems, i have a field called Amount (the total amount of all the items) and the Control Source formula i was using was =[Forms]![sFrmCustomerOrders]![sFrmCustomerItems]![txtTotalPrice] but i get a #NAME? error.

View 5 Replies View Related

Subform Record Display

Feb 6, 2006

I have a subform that displays three records for a single day in datasheet view. I want to display the most recent 2 days' records (six total). Re-sizing is not working. I'm guessing there's a simple solution, and I've searched for a post dealing with this but no luck. How can I do this? Thanking you in advance.

View 11 Replies View Related

Display Icon In Each Record In Subform.

Sep 19, 2005

I don't know if this is the right place to post this but here goes.
How do you display an icon or image in a field in a subform in Access2003?
I tried inserting an image into a field with its data type set to OLE Object.
This doesn't work. I insert a bitmap or icon file (*.ico) into the table. When I open up the subform the field displays the word "Package" for Bitmap image".
Any help would be greatly appreciated
Thank you :D

View 3 Replies View Related

Display Last Continuous Subform Record

Sep 28, 2005

Im sure this must be easy to do (but cant do it myself...)- how do I set a continuous form subform to display the last record when a new main form record is opened? Whatever I do, the continuous subform displays the first record and I have to scroll down to get to a new record, which is getting tedious.

Thanks

Matt

View 4 Replies View Related

Open Subform At Particular Record

Feb 2, 2005

Hi All

I have a subform called frmProducts and on it I have 2 command buttons One is to use the current open form to jump to a particular product to make it easier to edit the details and the other is to use the current form and jump to a new record.

Now I have this working when running the form on its own but when I try and run it as a subform it does not work. I am not sure how to adjust the coding to let this happen.

the Main forms name is "MainForm"

Below is my current coding to open the form at a particular record

Private Sub EditProduct_Click()
Dim Msg As String
Dim Title As String
Dim Defvalue As String
Dim Answer As String
Msg = "Enter a Product Name: "
Title = "Open Prouct Form"
Defvalue = ""
Answer = InputBox(Msg, Title, Defvalue)

If Answer <> "" Then
DoCmd.OpenForm "frmProducts", , , "[ProductName]='" & Answer & "' "
Else
DoCmd.OpenForm "frmProducts"
End If
End Sub

Below is my coding to open the form at a new record

Private Sub NewProduct_Click()
DoCmd.GoToRecord , , acNewRec
End Sub

Many thanks in advance for all assistance

Sirch76

View 2 Replies View Related

Open Last Record In A Subform

Nov 30, 2006

Hi,
I have a form, with a subform in it.
I am trying to add a record through the subform then once added I want to display that record..
at the moment I add the record but the first record is shown.

I have tried adding :

DoCmd.GoToRecord , Forms!frmviewscheme![QScheme_Establishment subform], acLast

but recieve a run-tim error 2498.

can anybody help me ?

regards,
Ja

View 8 Replies View Related

Subform Open To Last Record

Mar 22, 2013

I open a form to a blank new record, then when using a combo box to select a record I need the subform to open to the last record. Having trouble doing that. Both form and subform are Single views.

View 1 Replies View Related

SubForm Doesn't Display Until Record Present.

Aug 18, 2004

Only just started happening, with no explaination! Only one subform out of 5 shows as just background space until a choice is made from a combo box and then the thing appears with the record. WHY?!?!?! I HATE ACCESS... It's rubbish!! Apologies for my outburst...

View 1 Replies View Related

Scrolling A Subform To The Last Record On Open

Aug 27, 2006

Is there a way to automatically scroll a subform on opening so the subform is filled with the last few records along with the new record data entry line?

Thanks for any help,
Mike

View 10 Replies View Related

General :: Display Record In A Subform Based On Combo Box Value

Oct 11, 2012

I'm creating a database for my inventory. For now, my database have two tables namely tblSupplies and tblDetails. I have a main from (frmMain) and a subform (subDetails). On the main form i have a combobox (cboSupplies) and 5 textboxes, the cboSupplies and the five textboxes are unbound. If I select a value in cboSupplies it will populate the rest of the textboxes-OK.

What I want to accomplish is that when I select a value in cboSupplies it will grab all related records from the tblDetails and populate these records on the subform (subDetails).

SuppliesID was used as the link field from mainform to subform but its not working. Please note that SuppliesID field in tblSupplies and tblDetails has a One-to-Many relationships.

View 1 Replies View Related

Display Multiple Images Per Record Or A Form / Subform

Sep 27, 2011

Is it possible to display, in either a form, multiple images that are dynamically linked? Can they all be displayed at once 1 to many images, either by using navigation bars or scrolling through a subform? The links would be stored in another table within the same database and not as hyperlinks.

Conceptually it would be like scrolling through multiple records on a subform with images rather than alphanumeric data in fields.

Would like to know if this is possible and if so in what versions of ACCESS.

Is there add-on software that would make this possible.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved