I have designed a DB in access 2010 and it opens fine on my computer. However, when others I work with (who still have 2003) try to open the database, they get the following error: "An Error Has Occured Trying to Load The Form "Form Name" - Do You Wish to Continue".
When I click Yes, it brings up all of the VBA code in the background, but when i close all of that out, it still doensn't open.I am by no means an access expert.
I have been tasked with creating a tool to analyse mobile phone bill data and present the analysis, and our recommendation, to a customers. Being new to Access (other than basic tuition) this has been a slow uphill task, which is finally nearing completion, however there is a problem which I have not yet been able to overcome.
The requirement is for the DB to open first on a splash screen (lets call it Form A) with fancy picture where our customer is selected from a combo box, the customer is then telephoned, a linked computer screen is established and our staff then click "Go" to proceed to a second form (Form B) showing an account overview and more details.
The problem I have is when "Go" is clicked, the second form loads via on click event, and even populates the correct customer in its combo box. Unfortunately that is as far as it gets - the combo does not look up the information. The customer needs to be selected again for the subforms and subreports to load with the customer overview. To clarify, form B just sits there blank until the customer is re-selcted from the combo box in form B.
I try to open a web page with a form in access 2007. During the loading of the page it shows me 2 security error messages.
I tried to change the properties in Activex and especially the Silent property from No to Yes but this is not possible. In the next restart of the form restores the original settings.
When i open the same page with Internet Explorer it doesn't show any error. I have attached the database example to see exactly what happening.
Hello guys
How can get blank fields on opening or loading my form?. I don't want to prevent data entry option.
Please help me
Thanks:)
A receive a compile error when an OpenForm macro action is executed. The error message is: The form you referenced may be closed or may not exist in the database. Microsoft Access may have encountered a compile error in a Visual Basic module for the form.
How do I fix this compile error ?
when i want to open the database in an access database i have the following error. you have as the event property setting the expression entered when open.This expression has caused an error amppu (database name) can not find the form that is referred to
View 4 Replies View RelatedI have a split database with multiple users. Since I split the database, it runs slower than the unsplit version. I understand this happens. I would like to have a message pop up when the database is loading. It takes approx 2 mins to load. Users get impatient and start clicking. So, I wanted to have a message pop up to let them know it is opening.
I have the same problem with forms loading, I have 5 forms and each takes about 4 secs to load, so thought about a loading message there too.
We have access DB on a server accessed by 3 workstations. When we open the shortcut it opens a form. Few days ago we started getting this error: can't find project or library..Then this code opens in Microsoft Visual Basic
Code:
Function CheckCommandLine()
If Command <> "" Then
changeTableLinks Command
End If
[code]...
Link to the database is like this:"C:Program FilesOFFICE11MSACCESS.EXE" serverdbsci.mdb /cmd serverdbsci_data.mdb....We don't get this error on Access 2007.
I have a report that summarizes the record content that is contained within a form (one report line per form record). If the user wishes to view a specific record on the form, he clicks on the report control that contains a numeric value that identifies the record on the form. I can get that to work with the following code:
Code:
DoCmd.OpenForm "AdmissionForm", acNormal, , "[Admission Number] = " & Me.Text0
where Admission Number is a control on the form and Text0 is the control on the report containing the admission number requested i.e. if the report control Text0 = 10, the form would open with the current record in which admission number = 10.
Problem is though, the form opens as "filtered" with only the one requested record (i.e. record number 1 of 1). What I would like is the unfiltered form to be opened with the requested Admission Number as the current record. I have tried DoCmd.GoToRecord but can't get it to work.
I have a RTE 94 happening due to a piece of code running on a subform current-event which looks at a text box on the parent form. I understand this is due to the order of loading of the forms initially and all works fine when moving to other records once all are opened. How can I overcome this happening on first opening?
I am thinking I need to set a counter on the subform on load event to say 1, then when the subform current-event fires add some code so if the counter is 1, then do nothing, if 0 then run the code. When the mainform opens reset the counter to 0, then requery the subform. The form will now see the counter is set to 0 for the rest of the time, so will then always run the code.
Not sure how to go about setting out the code as I guess there needs to be some form of Public variable involved?
i searched for slow loading and found some fast internet packages on <web address removed by moderator>. By following the tips i just purchased now fast broadband but now i am facing the problem of slow loading on my local computer, is it due to any bugg with microsoft package or my system is infected by virus.
View 1 Replies View RelatedI'm having trouble getting my form to be "blank" except for the labels upon loading. I've tried putting in some code "on load" but it doesn't clear everything. I haven't had this trouble on some of my other db's, the only difference here is it's a switchboard. I don't know if that matters.
View 1 Replies View RelatedI have a pop-up modal form which is loaded (like 99% of my other forms) by a button on another form.
Unlike all of my other forms, however, it doesn't load its background properly. If I drag the window off screen and back or shrink and resize, it does look right, so I guess maybe it requires a refresh?Obviously, I don't want to rebuild the form from scratch, so maybe some vba which refreshes the screen?
I need to load my Default Form at start up of my database while office button,the Ribbon and the Navigation pane will be hidden. And when i go to form design view then i can use the ribbon and navigation pane.
View 2 Replies View RelatedPrivate Sub Form_Load()
Forms(0).ServerFilterByForm = True
End Sub
This 2002 code is producing an error ?
I am having a hard time with this project that I'm working on at the moment.
I have created a modal dialogue form that has a macro set to open another form and close the current form at the same time. The form that is being opened has textbox controls that have the default value set to hold the data that is in the textbox controls in the modal dialogue form that is closing. The problem is, is that when the modal closes, the controls in the next form display #Name? and the data is not copied to the next form.
I have a 2 level navigation form, which loads various subforms (obviously) - however i have an issue - i have mutiple security levels and for example when i click on 'view errors' it shows me 4 subtabs - Departments - now certain people are only able to view certain departments
However if say the depts are laid out like this - Dept 1 - Dept 2 - Dept 3 - Dept 4
Then i can on form load say if strsec = 1 then dept2.enabled=false etc - however if i want to set dept 1 enabled to false it loads it by default - is there a way around this?
I have a Form opening from Access Options. I would like to close this Form using the Timer. The following is the code I have used but it is not working.
Private Sub Cover_Page_Form_Load()
OpenTimer = Timer
End Sub
Private Sub Cover_Page_Form_Timer()
If (Timer - OpenTime) = 5 Then DoCmd.Close acForm, "Cover_Page_Form", acSaveYes
End Sub
Next question. If I can get this to work can I then use a DoCmd to open new Form within the code above or do I need a new process.
Hey,
I am updating a switchboard from someone elses work.
I get the error on other peoples computers (but not my own) that there is an "error loading DLL" and the I get "The expression On Click you entered as the event property setting produced the following error: The expression you entered has a function name that <database> can't find.
* The expression maay not result in the name of a macro, the name of a user-defined function or [Event Procedure].
* There may have been an error evaulating the function, event, or macro"
I am including a before and after of the db as attached. (-new is the new one)
Again the form opens perfectly on my computer for both but not for anyone else. The error thrown is included as well as the jpg
HELP NEEDED AND APPRECIATED!
I have a button that opens another form to enter data on. But when I click the button I am getting the error msg: "Can't find project or library." And the debugger goes to the following sub routine and highlights Date in 3rd line(tried to bold).
This only happens on 1 user's machine. The other 4 computers open it flawlessly. All 5 have the same setup/security. Don't know why it works on 4 and not the last one. Any ideas?
(Access97.)
Private Sub Form_Open(Cancel As Integer)
Dim x As Long
Me.txtEntryDate.Value = Date
Me.lblErrMsg.Caption = ""
CurrentRateCode = ""
CurrentUnitFactor = 0
CurrentCartonFactor = 0
Set PTdb = CurrentDb()
Dim rsVASRate As Recordset
Set rsVASRate = PTdb.OpenRecordset("SELECT * FROM tblVASRateCodes", dbOpenDynaset)
x = 0
Do Until rsVASRate.EOF
VASRate(x).RateCode = rsVASRate(0)
VASRate(x).UnitFactor = rsVASRate("UnitValue")
VASRate(x).CartonFactor = rsVASRate("CartonValue")
x = x + 1
rsVASRate.MoveNext
Loop
VASRateTableCount = x - 1
rsVASRate.Close
DoCmd.RunSQL ("DELETE * FROM tblVASData") 'clear VAS data summary table
If TableExists("tblVASEntry") Then
DoCmd.RunSQL ("DELETE * FROM tblVASEntry") 'clear VAS data entry table
Me.subform_VASEntry.Requery
Else
DoCmd.RunSQL ("CREATE TABLE tblVASEntry (VEID IDENTITY PRIMARY, 'Rate Code' INTEGER, Units INTEGER, Cartons INTEGER);")
End If
End Sub
Hi
My repair form pulls data from the vendor table to display the vendor information.
Whenever i try to open the repair form, it gives me a popup first that says "enter the extention number"
regardless of entering data or pressing cancel my form gets displayed.
When i enter a number (a random number) it wil populate my extention field along with all other data. And when i dont enter any number and hit the cancel button, it populates all data except the extention field, that has nothing to do with the number that i enter but is the one stored in the vendor table.
I am confused what to do with this
Can anyone help me
thanks
I have windows 7 and office 2003 installed.
I have access application which was running fine recently but for some reason everytime I run it now it gives an error on the adodb connection string saying compile error.
Its doing this on every adodb connection I have in my database.
I have tried registering the dao an ado dlls but still the problem persists.
I want to create a report using the data currently held in a form. I found this bit of code somewhere:
DoCmd.OpenReport "report", acViewPreview, , "[job number] = " & txtFilter.Value
txtFilter is the name of textbox containing the data I want for the report. This works if in the table for txtFilter's data the field is set to a number. But if I set this field to text it comes up with a data type mismatch error. How do I solve this? (sorry new to access and vba). The reason I want to set it as a text field is so that I can limit the number of characters entered.
Thanks
Chris
I am developing a database for my company which will produce reports based on data entered on various forms.
When the report opens, I would like its name to dynamically change to include the site, the client and their reference number. Although I know very little VBA, from searching this and other forums I have managed to get this to work on other forms.
On a different form, I have managed this by giving the form the caption "Caption" and then running the following code on load:
Reports("ItemisedQuoteFromQuoteFromViewSalesEnquiryFromSearch").Caption = "Our Quotation Ref: " & [StaffInitials] & "/" & [QuoteEnteredBy] & "/" & [QuotesJobsSalesEnquiryRecordNumber] & " - " & [ClientDetailsName] & " reference " & [JobsClientJobNumber]
Which will give the report a title along the lines of: "Our Quotation Ref: AB/CD/123456 - Client Name reference 987654".
On the report I am struggling with the code is:
Reports("MWUPropertyAssessment").Caption = "Property Assessment for " & [SiteDetailsAddressLine1] & ", " & [ClientDetailsName] & " reference: " & [PropertyAssessmentClientJobNumber]
However all this produces is "Property Assessment for , reference". If I try entering just "[SiteDetailsAddressLine1]", "[ClientDetailsName]" or "[PropertyAssessmentClientJobNumber]" I receive an Invalid use of Null error message.
If I create text boxes on the report for [SiteDetailsAddressLine1], [ClientDetailsName] and [PropertyAssessmentClientJobNumber] they are filled with the correct information so I know that these fields are not blank.
I have a form with a email field containing a email address, I would like when clicking on it this will open OUTLOOK 2003 placing the email address on the "TO" field
I have looked around but I have not find what I need, I had a VBA code but this will open me a web page instead of OUTLOOK.
Can I get some help!
Thanks
M.
I have a form that contains a subform. The subform is a datasheet which calls the results of a query of 4 tables (tbl_companies, tbl_deals, tbl_products, tbl_vl).
In the main form there is a button which opens a report with a historical record of dates of value changes of each product up to a chosen date. This chosen date is determined by inputting a date into a text box.
This report also sources (tbl_companies, tbl_deals, tbl_products, tbl_vl).
When I try to open the report, I get the run-time error "3211".
'The database engine could not lock the table "Tbl_companies" because its already in use by another person or process.'
I'm guessing that because the query for the subform is already calling the table, the query for the report can't call the table at the same time?