I'm trying to open a form in datasheet view using the following code
Code:
Private Sub Run_Activity_Duration_Totals_Click()
DoCmd.OpenForm ("frm_Activity_Duration_Totals_25_Hours"), AcFormView = acFormDS
End Sub
I keep getting a message saying
Compile Error: Type Mismatch
and the equals sign is highlighted in my code.
I have read various answers on how to open a form in Datasheet view from VBA code, but I can't get my syntax correct.
Here is one of my 50 attempts to guess at the format. Removing different components, separators, variables only gets me a syntax error of missing separator or "expected =".
DoCmd.OpenForm ("frm_OrdersHOTHeadersOnlyWORKSHEET", [View as acFormView=acFormDS], , , , ,[acFormEdit])
I have a form in datasheet view that has a user directory with a list of each person. On each row you can click to open another form that contains the users details using the below VBA:
DoCmd.OpenForm "User Details", , , "[ID] = " & Me.ID
But once you open to that specific record, no other records are available to navigate to.
I want to be able to stay on that detail form that was opened and go to another record.
How do I continue to pull up that specific user in my detail form, but also load the others so I can navigate to them from the detail form without having to go back out to the datasheet form?
i have the following code and i want that the form opens in datasheet view but i don't know how.
On Error GoTo Err_Befehl14_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "Copy Of frm_logistik_zeitfehlerein"
[code]...
I've created a Navigation Form and one of my tabs brings up another form bla bla but what I want is to bring this form up in datasheet view...is there a setting for this or due I have to create a query to get the look that I want?...
The Form that I attached to the tab when opening it up by itself (out of the Nav form) comes up in a datasheet type format,and when I open it up in design view it changes from the datasheet type format to texts boxes stacked on top of each other. This is also how it opens up in the Nav form...
Does it have to do with how the form I'm putting in the nav form was created?...style wise...
I have a form with a query as rowsource.When I open the form in data sheet view form header is not showing(Though it is visible in form view).Is it possible to show the form header in datasheet view?
View 2 Replies View RelatedIs there any possibility to have the application title bar on data sheet view form? I need it to close the form and return to main switchboard using the Close button.
View 10 Replies View RelatedHave created a form to display/change table info in Datasheet View and added the form to a switchboard.When selected from switchboard, it displays a single record. When executed from the Forms (objects), it displays in Datasheet view.? How can I get it to display in Datasheet View from Switchboard?
Default view = Datasheet
Allow Form View = Yes
Allow Datasheet View = Yes
When you open a form in datasheet view, the default ribbon is of course the "Datasheet" tab. I would rather have the "Home" tab ribbon open up, because I have one field in this form set up as hyperlinks to open another form, so the filter and search buttons would be more useful to the user. I'd rather not go to the trouble to create a custom ribbon, so is there anyway to set the default ribbon tab to "Home" when you load the form? There is a ribbon property for the form, but I don't know the reference name for the tab.
View 5 Replies View RelatedI have a Project form, which holds StockArtProduction_Subform in datasheet view. I need for them to be able to click on the ID in the StockArtProduction_Subform datasheet and it open a single view form (StockArtProduction) with the correlating ID.
Ideally, it would also work for new entries in the StockArtProduction_Subform, but the StockArtProduction form would have to "auto populate" (did I use it right?) with the ID of the currently open Project form.
I want to "zoom" to the underliyng data from pivot view. When in excel someone doubleclicks a field in a pivot table, it automatically creates a table containing all the lines that field were made up from. I want to achieve the same behaviour in Access.I started to think towards a VBA coda, that could be initiated from the form's double click event. It should go to datasheet view with the prpoer filter criterias.
View 1 Replies View RelatedSee title :)
I have seen that in some sample db's rightclicking the mouse showed the menu with an option to check or uncheck the dataview option, unchecked the formview was applied, but when i 'just' import the subform, i cannot find somewhere the possibility to change from dataview to formview.
Maybe someone can help me with this, probably very simple(?), question?
I have a form which is opened with a filter from another form. For some reason it views the form in form view, although it was set up as datasheet view. I even went to the form properties and the default was datasheet and i made it not to allow other views. This still didnt solve it. I want it to be in datasheet view because i want to show multiple records at the same time.
If u kno how i could resolve this please offer ur help
thanks
I have recently added a subform to a form and wish to display the subform in Datasheet view. Whilst I can get the proper data and headings to display, I cannot figure out how to get the column widths to persist. I can adjust the column widths while in (main) form view right on the subfirm columns themselves but after I save and reload the main & subform form, the widths revert to some sort of default value.
I have also tried adjusting the columns in the subform's associated data table itself as well as adjusting the text box widths when the subform is displayed in Form view but it does not affect the column widths when the subform displays Datasheet view.
What is more annoying is that I have another subform in which I was able to make the Datasheet view column widths persist but I don't seem to be able to properly recall how I did it.
I've set a form's default view to "Datasheet.
When I open the form the property sheet opens also.
Is this normal behavior?? If so why?
How can I remove the white space that follows the last record in my datasheet forms? Please refer to attached image. This happens in two different forms, scrolling in two different directions.
View 8 Replies View RelatedI want to avoid the properties list to pop out when a form is viewed in dsview. I remember there was a property to set that but I cannot find it.
View 3 Replies View RelatedI have a form in datasheet view, with a date column. When I filter for last week it gives me all the entries for that week, but when I try and filter on a single day it only gives me 1 entry even though I know there are several entries for that day. Why would it be doing this? It also is the same when I go directly to the table and try to filter. I know the underlying data that was imported is a full date and time stamp, which I'm displaying as just the date portion, but surely it should show me all that are on a particular date, not just 1?
Just checked to see whether it would give me "yesterday", and while it seem to be able to when I checked 2 days ago, now it's not even giving me those.
I have a form. On this form is a tab control with 5 tabs. Four of these tabs have subforms on them. The 5th tab is sort of a "settings" page. What I would like to do is have a button on the 5th tab, that toggles the subforms on the other four pages between the regular form view, and datasheet view.I know I can use the "DoCmd.RunCommand acCmdSubformDatasheet" to do this, however I am unsure as to how to apply it to the subforms on the other tabs. They aren't "in focus" so the command won't work properly.
View 1 Replies View Relatedhello,
I also posted this in the report section, but it doesen't seem like the readers over there have any answers. I'm hoping maybe query people will.
I'm working on someone elses database, and I'm not too familiar with access.
He's got this form called Customer_Select, and when you click on a check box for a customer, it's option value is recorded in a field called Product, which then corresponds to the product/customer id located in a table called CustomerCharacteristics.
The problem is that I just realized that this Product field existed. When I view the form as a datasheet, I see the fields: Product, Lot_Nr, Version:, and Last Update:
However, when i look at the field list for the same form in Design view, I get: DateTime, VersionDisplay, and Description.
Does anyone know what's going on here? I need to reference the Product field in a query I'm modifying, but the expression builder can only 'see' the fields that are visible in design view.
Any help would be greatly appreciated.
Thanks
I have a form that displays inventory using a datasheet format..
is there a way that i can make it so that if that record has a sales order number (because it is sold) then highlight that record...
I have a few forms - one search form (frm_main_search) which uses a basic datasheet view as a subform (subfrm_main_search), and one form which I launch from the subform (via a double click event) for the user record - frm_user_record.If I search for a user, then select them from the datasheet view query results, I can launch the user record as frm_user_record.
However if I then change anything on the user's record, I go to search for another user in the database and get the Write Conflict dialog. See my attached screenshot for a view of my form.I've changed the data of one of the visible records on the data sheet, so it needs to reload the data. However I'd like to suppress this error as I'm dealing with hundreds of these a day and it also confuses some of our less tech savvy users.
I ALWAYS click "Drop Changes" and encourage my users to do this too but is there a way of preventing this dialog from appearing?
I m having a subform in datasheet view. whn i use a join query as the record source for the sub form, i am not able to add or update any record in the datasheet. Is there anyway to use a linked query as record source of the datasheet with editable property.
View 2 Replies View RelatedSome background: I have a subform that is displayed in datasheet view, with an unbound textbox (field1) whose sole purpose is to pass the date and time entered into it to field2 (hidden, bound), and also display that info in this format: ddhhnn"Z" mm yy. The inputmask for field1 is 000000"Z ">LLL�0 which forces the user to enter the date/time using the ddhhnn"Z" mm yy format. I use field1's AfterUpdate event to convert its contents into a format (dd/MMM/yy hh:mm) that field2 can easily recognize as a date and time.
My problem: The only way I've figured out to get field1 to display field2's date and time is to use the subform's OnCurrent event:
Code:
Me.field1 = Format([Field2], "ddhhnn""Z ""mmm yy")
However, by doing that, whenever I click on a record's row the entire field1 column populates with the current record's field1 value. So, if I click on record 2's row, the entire field1 column populates with "101200Z JUN14" for every record. If I click on record 3's row, the entire field1 column populates with "111232Z JUN14" for every record. And so on and so forth.
How can I stop field1 from populating with the same value for every record?
Is there anyway that we can do cascading combobox in the same datasheet view of subform? Basically I'd like to filter "Account Name" based on "Plan#" selected in the same record of subform.
View 3 Replies View RelatedI have a subform in which I display a table in Datasheet View. The problem is, I cannot figure out how to place the columns in the order (i.e. from left to right) I want.
For some reason, right-clicking on a column header in Form View and selecting Freeze Fields will shift that column to the left but I can find no consistent pattern to it and no other way of shifting a column. Reordering the columns in the table itself seems to have no effect on the order they appear on the subform and moving the controls around in the subform in Design View also seems to have no effect.