I made a blank form, created everything on my form then added a header to put the title etc in and tried to view it using form view and the header isn't appearing. What do I need to change?
View RepliesI want to put command buttons in the Page Header, however the page header is not visible from form view?
What is the purpose of Page headers?
I created a form with a continuous default view and created labels in the page header of the form. When I view the form, I can see the data from the form detail, but the lables in the page header do not appear. Why can't I see the labes in the page header ?
View 3 Replies View RelatedI have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska
Ancorage
Prudo Bay
California
Whittier
Anaheim
Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs
Deleware
Dover
-------------------------------------------------------------------------------------------
Thanks !
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
I have been modifying an existing report that was formatting and printing fine but since I modified it (adding some text boxes and moving some controls around), it is now adding a blank page.
For example, If the report was normally 2 pages long with page numbers, it is inserting a blank page without page number between page 1 and page 2......
Hi
Is there any way I can put a page header on a table in Access - so that when it gets printer in Data View I can identify who's work it is
(sorry this is needed for a ICT class)
At the moment the only way I can think to do it is to rename the table with the student name in it e.g. Table1 John
Any help would be great
Thanks
I'm using VBA to insert the page number in a header. It's working, exept for a couple of things. I want it to insert the page number at the current position, and restart numbering at each section. I increment the section # with the variable x. Currently, it's inserting the page number at top-left of header. I want it to insert the page number after the word "Page" followed by 2 lines breaks.
Here's snippet of my code:
'Create Header
With ActiveDocument.Sections(x)
.Headers(wdHeaderFooterPrimary).LinkToPrevious = False
.PageSetup.DifferentFirstPageHeaderFooter = True
.Headers(wdHeaderFooterPrimary).Range.Font.Size = 9
.Headers(wdHeaderFooterPrimary).Range.Text = "Session: [" & rst!SessionNum & "] " & rst!SessionTitle & _
Chr(13) & "Presenter: " & rst!Full_Name & Chr(13) & "Page " & Chr(13) & Chr(13)
.Headers(wdHeaderFooterPrimary).PageNumbers.Add pagenumberalignment:=wdAlignPageNumberLeft, FirstPage:=True
End With
Any way to repeat the Report Header on every page?
I had my header in the Page Header so that it would repeat on every page, but it did not have the CanShrink option so I put it in the Report Header so it shrinks when I want it to, but now it doesn't repeat. I was hoping there was some kind of code I could implement that would let me repeat the Report Header on every page.
Or is there a way that I could get the CanShrink property in the Page Header?
I have a report, a phone list, which has two columns, see the attached file for a screen shot.
The Employee Name, Mobile Phone and Desk Phone text is in the "Page Header". The Data fields that retrieve from the table are in the "Detail" section. The whole report is 8.89cm wide. The two columns fit perfectly across a portrait A4 sheet.
When I run the report to Print Preview, I get the two columns fine, but the Employee Name, Mobile Phone and Desk Phone text doesn't repeat at the top of the second column. Is there some way of achieving this? I want the part I have circled in RED to appear over the top of the second column as well.
I would have thought there would be a simple check box somehwere that would be something like : "Repeat Page Header on multiple columns", or something as equally useful. Strange that this is so difficult to do, as am sure that this sort of thing is something that lots of people would want to do?
I have a report where I number pages based on the Store (muliple stores in report but page numbering resets when Store changes) I do this by manipulating the page number field on the report by code in the report sections to reset it and to increment it.
Code:
Private Sub GroupHeader0_Format(Cancel As Integer, FormatCount As Integer)
Me!PageNum = 0
End Sub
Private Sub PageFooter_Format(Cancel As Integer, FormatCount As Integer)
Me!PageNum = Me!PageNum + 1
End Sub
Private Sub ReportHeader_Format(Cancel As Integer, FormatCount As Integer)
Me!PageNum = 0
End Sub
The report has a Page Header with various fields and labels and that's been fine however I've had a request to hide a field on subsequent pages (i.e. print it on the 1st page of each store then hide it).
So I added the following code to various sections, but can't get it to work correctly. The fields (label and text box) appear on Page 1 for the first store then get hidden but never return even though when I step through the code it is functioning 'correctly'. The GroupHeader code is performed but the fields don't get displayed on the report. I think is isn't re-painting that section but adding code to the Paint event does nothing, and in fact doesn't actually get run, so not sure when that event is triggered.
Code:
Private Sub GroupHeader0_Format(Cancel As Integer, FormatCount As Integer)
Me!PageNum = 0
lblMemberNo.Visible = True
MemberNo.Visible = True
[Code] ....
I have an asset data base to generate individual asset detail reports with a sub report on the same page listing similar assets from a separate query. I have set the master and child fields, one to many. This works perfectly for the first two assets (pages), however the sub report stops showing data on the third asset (page).
View 13 Replies View RelatedSo I have a Form (frmPositions) with a subform attached (fsubPosSkill).They are linked through Position ID frmPositions Record Source is qryPositionNeeds
Code:
SELECT tblPositionNeeds.PositionNeedsID, tblPositionNeeds.PositionID, tblPositions.Position, tblPositionNeeds.NeedsID, tblNeeds.NeedStatus
FROM tblPositions INNER JOIN (tblNeeds INNER JOIN tblPositionNeeds ON tblNeeds.NeedID = tblPositionNeeds.NeedsID) ON tblPositions.PositionID = tblPositionNeeds.PositionID;
It has two texts boxes on it [PositionID] and [NeedID]
fsubPosSkill Record Source is qryPositionSkills
Code:
SELECT tblPositionSkills.PositionSkillID, tblPositionSkills.PositionID, tblPositionSkills.SkillID, tblSkills.SkillName, tblPositionSkills.SkillValueID, tblSkillValue.SkillValue
FROM tblPositionSkills, tblSkills, tblSkillValue;
It has two combo boxes, cmbo1 and cmbo2.
cmbo1: control source is SkillID and Rpw Source is qrySkill
cmbo2: control source is SkillValueID and Row Source is qrySkillValue
when I open frmPositions, the subform shows only the combobox label in the header, there is no combobox that allows me to select Skill or Skill Value.
I want to display a message on a label superimposed on top of all objects if certain conditions are met when selecting a record in a listbox. The label is normally invisible and only made visible when the condition is met. The label stays visinble for 2 seconds using the timer event.
All that I cannot do is display the label on top of the listbox, it always sits under it.
Before my registration form is submitted i have created a message box saying "would you like to submit?"
but it pops up as if it were to be an error message.. i will attach my coding and the pop up ..
I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
View 2 Replies View RelatedI have a report that generates 100 items in alphabetical order. All of the items are also displayed in a table. I have a bound form attached to the that table, and when the items appear they are not in alphabetical order. Therefore, it is a hassle typing in the data when the form will not appear in order, because instead of going in order I am flipping through pages. What is causing this to happen? And what can I do to fix this?
View 2 Replies View RelatedWhen a query returns no records, the form appears blank. How can I make the form appear eventhough there are no records to show prior to inputting data.
View 5 Replies View RelatedI have drop down list linked to table included "agent names" , the names appeared normally in the form but not Alphabetic (A-Z) although the table was alphabetic .
View 1 Replies View RelatedI am having a problem updating a record on a table called BookInTable . The field I want to update is called Engineer and the record is found using the field Barcode. I have a form with 2 text boxes BarTxt and EngTxt as well as a button called SaveBtn. on the OnClick event of the SaveBtn I put the following code
Code:
Private Sub SaveBtn_Click()
If IsNull(Me![BarTxt]) Or (Me![BarTxt]) = "" Then
MsgBox "Please enter a value!", vbOKOnly, "Invalid Search Criterion!"
Me![BarTxt].SetFocus
Exit Sub
End If
DoCmd.RunSQL "Update BookInTable SET Engineer = " & Me!EngTxt & " WHERE BarCode ='" & Me![BarTxt] & "'"
End Sub
But this is bringing up the enter Parameter value dialog box for whatever I type into EngTxt. If I enter text into that box and then click okay it then updates to the record. how can I stop the from enter Parameter value dialog box appearing?
I have created a list box, but is by default sorted by the first column. I would like to sort the list based on other column. I also would like to have the headers of the tables in the list box. I don't also know if this is possible, if so, how to get a header in a list box.
View 3 Replies View RelatedI would like to create a command button on the header of a form. The button should perform a toggle switch: click once to activate the task and click it again returning original state. I can create the command button to perform a task but do not know how to return to original state. The button should have indicator showing which state is in.
View 2 Replies View RelatedI placed all of the fields in the Form Header. I found this when I tried to view the form in Form View I could not scroll down because of the scroll bars were missing even though the properties indicated they were both enabled.
My question is how do I move everything from the Form Header into the body? When I right click on the form and try to deselect Form Header I get a warning message saying everything will be deleted. how to copy and paste?!
I need to construct a very complex student/coach/time/day Database.
Every student can attend a lesson twice a week, on a particular day and time with a particular coach.
Every coach has his/her own time table (Days available, times available on those days).
So I want this effect on a form:
Day: Monday
Coach: Jack
Time: 10:00
So Coach is dependent on Day, Time is dependent on BOTH Coach and Day.
I got the first one working but I am stuck on the second.
I created a Table for every day of the week (Mon through Friday) and have each coach's name as the "header" of a column, in that column I have the times they are available:
Code:
Jack - Roy
08:00 - 09:00
08:20 - 09:20
08:40 - 09:40
In my form, in the event procedure of the second list box I have the following:
Code:
Select Case [Swimming_Day_1]
Case "Tuesday"
[Time_1].RowSource = "SELECT [Coach_1].Value " & _
"FROM [Tuesday Times] "
End Select
But now when I select for example "Jack" in the "Coach_1" List box, the "Time_1" list box lists 3 entries of "Jack", not "08:00, 08:20, 08:40" respectively.
How can I accomplish the above without having to create a separate Day/Times Table For each and every coach (There are 8 coaches and 5 days, and I want things as easy as possible to update coaches should there come extra or some leave maybe).
I have a form with a query as rowsource.When I open the form in data sheet view form header is not showing(Though it is visible in form view).Is it possible to show the form header in datasheet view?
View 2 Replies View RelatedHow do I move combo box label into the form header area while leaving the actual field title in the detail area in a subform so they looked stacked like the other items??
View 1 Replies View Related