.I'm trying to pass a field ([txtUPRN]) in a form to a hyperlink or button on the form.
e.g. [URL]
I thought I could add a hyperlink and simply change the part 'jlocation = 26800' to 'jlocation = Me![txtUPRN]' but this would be too easy as it doesn't work. THe URL still opens a web page but displays no data. Do I have to be more explicit as to what I'm passing in i.e. use the full form name or am I going about this the wrong way?
I have a field in a Table (tblMainFile) named "File Location" which contains a hyperlink for each of the files.I have a continuous form (from a query) which displays information from the tblMainFile table.the form shows a text box (with the hyperlink) which is clickable to take them to the link location.I would like to have a button which says (GET FILE) or a different text box which simply says "Get File" as opposed to the entire hyperlink.
View 6 Replies View RelatedI created a table about films and i made a form so i can see each movie in a different record. I wanted to create a button which generates a link to the movie's internet website. But when i create a button i cant put a different hyperlink for each record of the form.
My idea is the button to have a logo of the site so that is why i cant just put a link in a text box. I also tried embedding a hyperlink to a picture but again i had the same problem.. there was only one hyperlink for all the records .
I am attempting to create a form (Access 2013) that will include buttons to open the hyperlink menu to add a hyperlink into a table. It works if you click "Ok" without issue, however, if you click "Cancel" or click on the "X" I get a "Run-time error '2501' - The RunCommand action was cancelled". This is obviously referring to the RunCommand in the VBA code. The code does not reference the cancel or close option of the hyperlink editing box. I don't know how to correct this error.
Code:
Private Sub Command9_Click()
Me.[Hyperlink].SetFocus
DoCmd.RunCommand acCmdInsertHyperlink
Command9_Click_Exit:
Exit Sub
[code]....
Also, is there a way to get the hyperlink to populate as the full network path and not the drive letter?
I have a form with option group (two option buttons) and date fields (to select a date range). The form should pull/pass parameters from the query. There's a form button that generates a report based on the query.
Issue: I can't figure it out how to link option buttons and date range to the query so when the button is clicked it generates the report with chosen criteria. The form is for the user to enter parameters.
totalold = total
total = amhrs + pmhrs
Debug.print totalold, total
DoCmd.RunSQL "update hoursbilled set hours = (hours - totalold), extended = ((hours - totalold)*45) where customer=cust AND employee=empl AND friday=grabfriday;"
The Debug shows the actual value in totalold, but when the query line executes, there's a pop up asking for a value for the totalold field?
I have a button that, when clicked upon, I would like to hyperlink to one folder--the location of which being specified by a value the user selects from a combobox.
Example of what I would like to happen:
1)The user selects the Ship Name "AGER 2-Pueblo" from the combobox list.
2)The user clicks the "Go To Ship Folder" button to go to this ship's folder.
3)Access takes "AGER 2-Pueblo" from the combobox and tacks it on the end of the general address of "C:Documents and SettingsDesktopShip Stuff" so that the folder "C:Documents and SettingsDesktopShip StuffAGER 2-Pueblo" opens.
I tried searching for this...but found nothing except the application.followhyperlink code, which I can't get to do this. Can this be done? I would appreciate any help.
Hey all,
I am embedding a MS Access 2003 Database form into web page (iframe) by creating a "Data Access" form.
I have created it all and it works fine. But there is one last thing i need to sort out.
When the user clicks the Submit button (Really a Save Record Button), i would like the button to also forward the visitor to a basic "Thank You" html page, in the actual iframe. At the moment the record saves, but it doesn't give the visitor any acknowledgement that they submitted successfully.
What code do i need to add to the <Button> code on the Data Access form, in order to create a hyperlink. I am not too familiar with VB.
Thanks.
Is it possible to have a macro button to pass query results to a listbox? I have a database where I have some fields with dates. What I need to do is to show a list of all cases that have a start date (and also the end date). So I will have 2 buttons, one that says "show started cases" and second one "show closed cases". If I press the first button, it will run a query and show only those cases that have a date filled in the started case field. I made a button that shows the results in a report, but I would like to have it show up in a listbox so I can double click it and go straight to the case.
View 14 Replies View RelatedHello all, I hope your hollidays were great!!
Ok I have a Continuous form that in one of it's fields contains Hyperlinks. The form is named [Song Info] and the field is [Play].
I want this field to be hidden and have a command button open up the hyperlink in that recordset. I think that all the info need
but if not let me know.
Thanks
Rich M
ok, I have links to documents(reportLink) stored as type text in a table (Investigations). Each link is different per record.
I have a form that display information from this table. The field that holds the hyperlink is called reportLink on the form. On this form I would like to have a button that when clicked will open up the [reportLink] for that particular record. so this button will point to a different file each time the record is changed.
I have stumbled around this site and think I have to put the
Application.FollowHyperlink code in the OnClick event for this button. However, I am clearly not doing it right as it isnt working. what is wrong with this:
Private Sub Command34_Click()
Application.FollowHyperlink Me.[ReportLink]
End Sub
I am trying to create a button that opens up a webpage. I get how to create a hyperlink on a button. The problem is, I need to open a specific page depending on the information in a text box.
The text box displays the tracking number for the current record. That number is populated automatically via a control source. The problem is that I need to open different web pages depending on the tracking number displayed. For example, UPS has a specific start to their number (1ZX....). Other trucking companies have a specific format, also.
So how do I tell it to look at the tracking number and then open the corresponding web page?
I have a command button on a Web Mutli-Record form that is using a "= [Report_URL]" value within the Hyperlink Address property. This all seems to work other than the fact that when the link popups up it has a "#" on either side that basically makes it an invalid address. How do I get rid of the # signs to get the web address popup in the URL when a user clicks on the Command Button that is associated to the row the record is on.
View 4 Replies View RelatedI am trying to create some code for a button in a report that will follow a hyperlink to a specific file. The problem I'm having is that the files that are at the end of the hyperlink can have various extensions (*.doc, *.docx, *.pdf, etc.) I'd like to be able to put a wildcard in the code to allow the opening of the file regardless of the extension.
Code so far:
Private Sub Command6_Click()
Application.FollowHyperlink ("C:UsersjbeggDocumentsAccessTestFolder" & [FileName] & ".*")
End Sub
Good afternoon, I have a form with a subform and in the first txtbox of the subform in the GotFocus event I have a little procedure which checks the txtboxs on the parent to make sure that there is data in all four of the txtboxes. This works great the first time and it pops up a msgbox and it even setsfocus on the txtbox with no data in it, but if I tab into the subform a second time and there still is no data in one of the txtboxs on the parent form, nothing happens, no message and no setting focus on the txtbox with no data in it. Does anyone know of a way to get this procedure to re-set everytime a user tries to enter the subform? Thank you in advance to anyone offering and ideas and suggestions.
View 8 Replies View RelatedI'm trying to include a field in a form by putting the form in the design view, however, when I try to press the button 'Add Existing Field' or 'Property Sheet' in the Tools group Access doesn't do anything.
I have tried to search on the web for possible solution but I haven't found one yet but I did read about disabling the shift-key feature which may have something to do with it.
On an access 2010 form if there are 5 fields (Number,Address,Gender,Age,Date). Is it possible to use a button to export 3 fields (Number,Age,Date) to an excel spreadsheet (Master) and place them in a specific worksheet (Info)?
View 1 Replies View Relatedi have thousands of data records with hyperlinks that are correct. Each data record shows the actual link (google.com, foxnews.com, espn.com, etc.). However, i want to change all of the records to just say "link" instead of saying espn.com, etc. How can i do this automatically without having to manually right click, edit, and changing the text to display?
View 6 Replies View RelatedI have an SQL table that uses bigint on the primary key field. When I lilnk this table into Access 2010, this table is not even visible because bigint isn't recognized by Access.I have a field on this SQL table that I need to update and I was looking at using a Pass Through query in Access. I have a query in Access that creates a list of records that I need to update.
View 3 Replies View RelatedOk so the Data I have holds a hyperlink to a file this field is "basepath".In Form view I want to have a command button that reads the basepath (for that record) then opens said hyper link.
View 3 Replies View RelatedI know all of the main features and can even do a bit with macros and VBA. I need creating a button to auto-fill a field in all the records in a table.
I have a database centered around a table called tblCand; each record contains a date field called intDate. On the main form, initDash, when the user hits a certain button, a window pops up (either a message box or perhaps a separate form) that asks the user to type in a date, which would be stored as intDateDB. When the user hits OK, I want the value of intDateDB to replace the value of intDate in all the records in tblCand.
I'm not sure whether this is called auto-filling or auto-populating...
I'm after a macro or something to allow me to map a button on a form so that when it's pressed it copy's a certain field to the clipboard?
View 1 Replies View RelatedI have all of my text fields disabled and I want the user to press a button to make them enabled. I have a field that links to the database called, "lastName".Under the button's clicked property, I have coded,
Private Sub Command44_Click()
lastName.Enabled = true
End Sub
I'm having a problem trying to update a date field from a button.
I have a form called Add_New_Domain which runs from a table called Domain_Names.
Within the form there is a field called Expiry_Date which tells me when the domain is set to expire. When I first create an entry I manually enter a date in here.
However, every year when the domain renews I would like to increase this date by exactly a year by clicking a button which is also on the form.
Is there any way to have a hyperlink field in a table that has a very long path to the file show something different?
Example C:Documents and settingsMy FileOther FileThis Fileme.pdf
Woud like it to simply show "Open File"
Thanks!
Fen How
In a table of a SQL-Server 2008 I have a fieldname "Alter", the German word for age.
When sending a PT-qry to the server I get an error "Incorrect syntax near the keyword 'Alter'"
Even when I try to set "Select tblmytable.Alter as Age" I get the same error.
To change the fieldname is almost impossible, as there is to much code to change.