I need to pass values of my two check boxes on my Form
Check box US and Check Box Canada
if both checked the criteria would be "UD", "ud',"b","B","us","US","CD","cd"
if Canada check box checked criteria would be "cd","CD"
if US only checked criteria would be UD", "ud',"b","B","us","US"
how to write the criteria statement on the query?this probably would be a complicated iff statement?
I have a query which contains figures. i have a search form based on this query and need to search using comparison operators such as <10000 or >500.
Is there a way to pass these value to criteria field in query ?
I need to pass a criteria to a query from my option group control to my query.
It contains three options 1,2 and 3.
If option 3 then Pricing Type 1 and 2
How do I make the code below working?
IIf([Forms]![FrmUserSelection]![PricingType] Like 3,([dbo_AGPricingDiscounts].[PricingType])="2" Or ([dbo_AGPricingDiscounts].[PricingType])="1",",[Forms]![FrmUserSelection]![PricingType]")
Hi
I have recently started using queries to base my forms on. Even for basic forms i am using the query as the record source.
If for example i have a standard query with no criteria e.g. a employee form. How would i then use that query to create a report that filters for example a list of employees for a certain company?
Would i have to create a seperate query to base the report on? because the form when opened will always filter that criteria?
If this is the case, is there a way to keep a query set up with no criteria but when the object being used is opened some code will pass to the query the criteria e.g. a combo box on a form list all the companies and when one is selected it passes this to the query e.g. without the criteria already being in the query?
Hope that makes sense.
thanks
scott
I have a combo box in a form which allows users to select a Client Group. One of the choices in the combo box is ALL.
I have some code in a STEP1 query that says
SELECT IIf(Forms![Date Picker].[Client Group]="ALL","'SEDP' Or 'LD' Or 'MH'",Forms![Date Picker].[Client Group]) AS Expr1
FROM MPI_PERSON
GROUP BY IIf(Forms![Date Picker].[Client Group]="ALL","'SEDP' Or 'LD' Or 'MH'",Forms![Date Picker].[Client Group]);
I have a STEP2 query to select all records on the MPI_PERSON table and do some slight processing.
Now, in a STEP3 query, I want to select all records from the STEP2 query where the field [Client Group] satisfies the STEP1 criteria. If the Client Group chosen in the Combo box is one of the existing categories i.e. SEDP or MD or LH, it works but where the ALL has been entered, it is returning no records in the final query.
I have tried pasting the results of the STEP1 query into the criteria box as a test - and in that case it does return all records I want. What do I need to do to get the criteria recognised in the QBE box - do I need to use Eval or something?
Here is the SQL for the final query
SELECT [Find all Clients STEP 2].[Paris ID], [Find all Clients STEP 2].DOB, [Find all Clients STEP 2].[DOB Estimated], [Find all Clients STEP 2].Gender, [Find all Clients STEP 2].[Status From Date], [Find all Clients STEP 2].[Status To Date], [Find all Clients STEP 2].STS_MAIN, [Find all Clients STEP 2].Title, [Find all Clients STEP 2].Name, [Find all Clients STEP 2].NAM_FROM, [Find all Clients STEP 2].NAM_TO, [Find all Clients STEP 2].[Client Group], [Find all Clients STEP 1].Expr1, Len([Expr1]) AS Expr2
FROM [Find all Clients STEP 2], [Find all Clients STEP 1]
GROUP BY [Find all Clients STEP 2].[Paris ID], [Find all Clients STEP 2].DOB, [Find all Clients STEP 2].[DOB Estimated], [Find all Clients STEP 2].Gender, [Find all Clients STEP 2].[Status From Date], [Find all Clients STEP 2].[Status To Date], [Find all Clients STEP 2].STS_MAIN, [Find all Clients STEP 2].Title, [Find all Clients STEP 2].Name, [Find all Clients STEP 2].NAM_FROM, [Find all Clients STEP 2].NAM_TO, [Find all Clients STEP 2].[Client Group], [Find all Clients STEP 1].Expr1, Len([Expr1])
HAVING ((([Find all Clients STEP 2].[Client Group])=[Find all Clients STEP 1].[Expr1]));
Hope there isn't too much "Social Services speak" in there - I can also strip down non-crucial fields if it makes it easier to follow what I'm on about.
i have a query in design view to which i'd like to pass a criteria value for one field... I have some routine in VBA which creates a string as below:
"SupplierName1" And "SupplierName2" And "SupplierName3"
I am passing this to a textbox on the form exactly as shown above.
I would now like to use this value as criteria input for the query. However, it seems that Access doesn't recognise this....if I write just SupplierName1 in the textbox, the query works fine but as soon as I put in the quotes or else more than one supplier name, it does not work...
any ideas how can i resolve this?
Just FYI, the string of names of suppliers is being generated through string manipulation from a listbox using a value list.
Thanks in advance.
I'm trying to pass values from a combo box to the criteria for a select query. The first 2 columns of the lstCompany combo box are Serial Number and Company Name. I have tried a number of different ways to no avail. Anyone know?
Thanks,
Beagles
Hello Everybody,
I have an append query that contains a parameter [PTIdent] under the field named PTID. I would like to be able to set the parameter through VBA from a control on a form eg Form!PTID
I use the following code as normal
Private Sub Command19_Click()
On Error GoTo Err_Command19_Click
Dim stDocName As String
stDocName = "apNewPres"
DoCmd.OpenQuery stDocName, acNormal, acEdit
Exit_Command19_Click:
Exit Sub
Err_Command19_Click:
MsgBox Err.Description
Resume Exit_Command19_Click
End Sub
Is there a way within this code to do this? I realise I could set the form criteria within the query itself. However I wanted to be able to use this query from multiple forms.
Thanks for any help
My problem is as follows, i have created a report that calculates the total volume of FSC Materials. The user picks two dates from Calender controls that the report will range from. However the needs have now changed and i am required to make the report filter further based on user input, the problem i'm facing is that i cannot figure out a way to pass values from different variables to the report separate from another here is the code i would usually use to pass data to a query/report:
Code:
Private Sub MonthlyFSC_Click()
Msg = MsgBox("Select the Start and Finish Dates you wish to Query.", , "Start / Finish")
Start = adhDoCalendar()
Finish = adhDoCalendar()
[Code] ....
However i am now trying to do this, but it gives me an error as it is trying to pass the values to one field:
Code:
Msg = MsgBox("Select the Start and Finish Dates you wish to Query.", , "Start / Finish")
Start = adhDoCalendar()
Finish = adhDoCalendar()
sql1 = "[ORDER DATE]<#" & Format(Finish, "MM/DD/YY") & "#"
sql2 = "[ORDER DATE]>#" & Format(Start, "MM/DD/YY") & "#"
[code]....
It is performing incorrectly within the case select and passing the wrong criteria, as it will only display results that meet the default values' criteria. However the date criteria is not be passed either.
having used a query to generate data from a set of records where i can select the criteria (they are two letter abrv and are in a single field in the table but there may be multiple criteria). As I would like others to do it without using the query my first thought was a form with a series of check boxes tick for inclusion in the query or not. As i have built the query am I looking at changing that or taking it all into VB and using some code to pull the relavant 'ticks' across............ and how the hell would i do that......
many thanks in anticipation......
having used a query to generate data from a set of records where i can select the criteria (they are two letter abrv and are in a single field in the table but there may be multiple criteria). As I would like others to do it without using the query my first thought was a form with a series of check boxes tick for inclusion in the query or not. As i have built the query am I looking at changing that or taking it all into VB and using some code to pull the relevant 'ticks' across............ and how the hell would i do that......
many thanks in anticipation......
I have a table(Product Change) with these fields:
Tracking Number
Approved (a check box)
Engineering (text box that represents department)
Purchasing (text box that represents department)
Quality (text box that represents department)
Production (text box that represents department)
Customer Service (text box that represents department)
I want my query results to show all records that have the "Approved" check box...checked, and then only the records that have one of the Department fields with a null value.
So I'm looking to see only records that are "Approved" and out of those....only the records with at least one department field empty(Null).
Any help doing this is SQL view would be great...or even design view.
I have a form with a check box. A query is run that looks at that check box and decides what the criteria are based on that. So, if the check box is checked, it should pull in all data in the field that is a Y. If it is not checked, i want it to pull all data (Y's and N's and blanks).
here is my criteria:
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y","*")
This does not seem to work. I have also tried:
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y")
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y",Like "*")
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y","like "*"")
I am using Office/Access 2003. I have created a report that functions fine within access. The report is based on a query requesting the users Representative ID. It functions as expected. We then creayed a web page using the same query. Again this works quite well. The user clicks on the link - Access pops up the criteria dialog asking for the rep id. What our problem is that we are trying to determine where we can put the Rep ID in the page so it will automatically fill in the Criteria Dialog. We see no place in the access page where the criteria can passed. We have the criteria because they use it when they sign in to the sight. I can pass it as a hidden field, an application variable, or even a server variable but how do I get the web page to see it and stuff it into the criteria dialog.
Frustrated in Tucson! Thanks for your help in advance
Greggers
I got a database that has a multitab control. In the first tab there is the data and second one is a search tool. It contains a field where to type the text to be searched and a listbox where the results should show up.So far I only managed to create the query and link it to the field (textbox) where the user puts the search word. I just have no clue how to display the results on the listbox once the text is entered and the button pressed.
View 8 Replies View RelatedI have a function in a module that looks like this (it takes 2 dates as arguments):
Code:
Function get_KPIScanAgeRange(in_ScanDate As Date, KPIDate As Date) As String
Dim ret As String
ret = "Invalid"
' return value, by default is because age is negative number
[Code] .....
I'm trying to pass the date in a text box which exists in a form called "d3FormAging". The text box name is "KPIDate". The query looks like this:
Code:
SELECT Query_d3_Open.[Company No], get_KPIScanAgeRange([Scan date],[Forms]![d3FormAging]![KPIDate]) AS KPIScanAgeRange, Count(Query_d3_Open.[Scan date]) AS Scans
FROM Query_d3_Open
GROUP BY Query_d3_Open.[Company No], get_KPIScanAgeRange([Scan date],[Forms]![d3FormAging]![KPIDate])
ORDER BY Query_d3_Open.[Company No], get_KPIScanAgeRange([Scan date],[Forms]![d3FormAging]![KPIDate]);
For some reason Access doesn't recognize the "[Forms]![d3FormAging]![KPIDate]" when I pass it to the function. I get run-time error 3070 with information that Access can't recognize this expression even though the code should be correct as it's made with the expression builder and I'm sure the form that contains the text box is open when the query runs.
Not sure which forum this was under, but I figure Access might be it
I have a stored procedure already written which works fine, if I supply the criteria to it before or at manual execution. I want it to use a field on a form in an Access Data Project as it's criteria (as a form is built off the results of the procedure). I can't find any documentation on how to pass criteria to a stored procedure for use in SELECT WHERE statements.
Can somebody point me in the right direction? Here is my stored procedure:
spGetContact:
Code:CREATE PROCEDURE dbo.[spGetContact](@parHomePhone numeric)AS SELECT dbo.tblContactAddress.AddressLine1, dbo.tblContactAddress.AddressLine2, dbo.tblContactAddress.City, dbo.tblContactAddress.Zip, dbo.tblContactAddress.State, dbo.tblContactEmail.PrimaryEmail, dbo.tblContactEmail.SecondaryEmail, dbo.tblContactPhone.HomePhone, dbo.tblContactPhone.BusPhone, dbo.tblContactPhone.CellPhone, dbo.tblContact.ContactID, dbo.tblContact.FirstName, dbo.tblContact.LastName FROM dbo.tblContact INNER JOINdbo.tblContactAddress ON dbo.tblContact.ContactID = dbo.tblContactAddress.ContactID INNER JOINdbo.tblContactEmail ON dbo.tblContact.ContactID = dbo.tblContactEmail.ContactID INNER JOINdbo.tblContactPhone ON dbo.tblContact.ContactID = dbo.tblContactPhone.ContactIDWHERE (dbo.tblContactPhone.HomePhone = @parHomePhone)GO
When i execute this manually I get the dialog prompt to enter the value for @parHomePhone, which is what I want to automatically pull from txtPhone on the frmSearch form.
I get a negative value when i run the below expression.
The expression picks the month from the field txtmonth in form "frmYearToMonth" and search's the crosstab query "ctbYearToMonth" for the corresponding value in txtMonth.
=DLookUp([Forms]![frmYearToMonth]![txtMonth].[Value],"ctbYearToMonth","")
The value is correct but there is a negative sign before the value how do i eliminate the negative sign.
This is my passing criteria to query field:
IIf([Forms]![FrmUserSelection]![PricingType]=3,1 Or 2,[Forms]![FrmUserSelection]![PricingType])
My field is Pricing Type and holds records 1 or 2..I would like to pass value from my group option from a form.It works fine if group option has a value 1 or 2 but it displays no records if option value is 3 What is wrong with my code.
I am trying to pass parameters to my qury thru my combo selection. I keep getting this error "Data type mismatch criteria expression", does anyone have an idea why?
WHERE (((fShiftWorked([tblTimeLog].[timeStart])=[Forms]![frmOperatorWorkDone]![cboShift] Or IsNull([Forms]![frmOperatorWorkDone]![cboShift]))=True));
I have spent so much time onthis already and i am sick of it :mad:
Attached is my db. Please help me out here.
how can i make a image appear in my form when there is a check in the check box from the table?
View 14 Replies View RelatedI want to run query by using a criteria on a checkbox. The query will output the list of records if user has selected the check box. How can I write my criteria? :confused:
Thanks a bunch for any help advance...
I have a sub form that shows me a companies history. This subform is used on 2 different Parent forms. The record source for the sub form uses a criteria that looks at a companyID field on the parent to determine which records to return. My question is how do I have the query criteria depend on which form is currently opened? The criteria would look something like this:
[Forms]![frmCompanyHistory]![txtCompanyID] OR [Forms]![frmCompany_Project_Details]![txtCompanyID]
If I open the form with this criteria, I will be asked for a value in txtcompanyID for whatever parent form is not open. How do I properly do this without making multiple queries that are almost identical?
I have 3 queries populating 3 subreports on a report, i have a checkbox on my main form i launch the report from - i reference it in a filter on the form to ignore certain error types - id like it do to the same in the queries that populate the reports
So the reports atm give - an over all count of error types, a count per person and then a breakdown on type per person
Thats all fine but id like the option to ignore one type of error (as we sometimes look at it and sometimes dont).
What is wrong with this criteria...
RecSet.FindFirst ("[SomeField] = '" & mMESTO & "'") and ([CheckField] = True)
I would like to make a DLookup that check 2 criteria in two different columns in the same table. The reason to use a DLookup is that I would like to check if two parts already have been linked together. The user therefore selects two values in to different comboboxes (lstLinkPart and lstLinkToPart). In this case the value of the first combobox is column: ComponentPN in tblProductLinkComponent. For the second (lstLinkToPart) column ProductPN, in the same table, has to be checked.
If both values from the comboboxes match the values in both (and only) columns I don't want to continue and made a code to be executed.
I found multiple examples on the internet for using multiple criteria but something similar to what I require.