Forms :: Password Protected Form - Showing Asterisks
Jul 16, 2013
I have a password protected form that works fine. However, when you type in the password it can be seen on the screen. Is there a way I can change that so that when the password is typed in it can't be read (perhaps showing asterisks)?
This is what I'm using:
In ON CLICK event
Dim PassWord As String
PassWord = InputBox("Enter Password")
If PassWord = "MYPassword" Then
' Open Form
DoCmd.OpenForm "MYFormName"
DoCmd.GoToRecord , , acNewRec
Else
MsgBox ("You're not authorized")
End If
I have found the following code to password protect my form, it works but I have one problem, the input txt box does not have the input mask set so the password can be seen on screen, here is the code I have:
Private Sub Maintenance_Button_Click() Dim strPasswd
'Check to see if there is any entry made to input box, or if 'cancel button is pressed. If no entry made then exit sub.
If strPasswd = "" Or strPasswd = Empty Then MsgBox "No Input Provided", vbInformation, "Required Data" Exit Sub End If
'If correct password is entered open Employees form 'If incorrect password entered give message and exit sub
If strPasswd = "ssd" Then DoCmd.OpenForm "Maintenance", acNormal DoCmd.Close acForm, "Menu", acSaveNo Else MsgBox "Sorry, you do not have access to this form", _ vbOKOnly, "Important Information" Exit Sub End If
End Sub
Can anyone advise on what vba cmd to use in the password string to enable the password input mask?
I have a mdb file that does not have database or user level security, but it does have a VBA password.I want to transfer (overwrite) a new form to this database from another Access database. The form I'm exporting has VBA code. When I try using docmd.TransferDatabase I get an error. The error is:
"The TransferDatabase action was canceled."The line is:
where txtCheckInFile is the location and mdb file name I'm trying to send the export.It might be because the form already exists. So, if I go into the database and delete form, and repeat the export I get the message:
"Microsoft protect this Visual Basic for Applications Project with a password. You must supply the password in the Visual Basic Editor before you can perform this operation."My question is it possible to transfer a form to a MDB that has a passworded VBA? I know the VBA password.If not, perhaps it is possible to remove the VBA password in the database (using VBA), make my export, and then add the password back in?
I am building a very comprehensive Membership Management Database with extremely useful facilities initiated by some 20 or 25 Queries..
The database includes 5 Tables which store data relevant to members, another which stores details of Interest Groups and a 3rd which stores which members are affiliated to which Group or Groups.
Currently the database is accessible only by a very limited number of persons and data can be entered/edited by only one person. The database, using Access 2010, is maintained on a desktop computer and synchronized to a copy on a Cloud.
My requirement is to permit some 50 Group Leaders to input/edit data on a Password protected Group Members Form such that that is the only element of the database that they can access. The Forms would have only 2 fields from which the user would select entries from drop down lists.
My query is ; is such a procedure feasible in principle and would I be correct in assuming that the user would require to have available a copy of Access.
Firstly thank you for your help, this should be a simple one I hope, but is cracking my head on the wall. Have searched and searched and can't find an answer.
I have an Access Db that is not password protected, but is asking for a password. It opens on any other machine fine?
I think my version of Access is playing funny buggers with me, any suggestions?
I was trying to implement some security on this Db, which is why it happened I'm sure. I ran the security wizard, set-up two users and admin with passwords, I have the output file to "recreate" something too.
Issue is, I then copied this Db to another computer for use on there, it worked without a Password, so didn't need to worry about it, now I can't open any Db on my machine??
How can I add a password to a button, i.e. whenever someone clicked on this button he has to enter a password in order to proceed to the form which the button opens?
Hi, I have a button on form A that opens form B, but i wud like to put a password on this button, so when you click it, you have to type in a password before form B opens. I'm using access 2000.
Hi Everyone, I am attempting to move a password protected database to a different folder on our shared drive but I am not sure the steps that are needed to do so. The database is already split. Can someone please assist???
Hi, I'm trying to convert a access database in to a sql server. My client hasn't got the exclusive access or doesn't have a username password for the access database. I'm trying to import the data in the access to sql server and when I try to open it it says " This error is usually associated with opening or converting a security enhanced Access 97 or earlier database. If you are not the owner of the database, you most likely will not have the necessary access rights to open or convert it. "
Hi guys! I have a front-end (FE) linked to a back-end (BE) db. I have added a password to the BE, but the knock on effect is that the FE won't work now. Just says 'Invalid Password'. I'm using MS Access 2002.
Any help would be appreciatted.
(The password is to prevent unwanted users from deleting data on the BE on the server)
I use a database that someone else set up and is no longer here. To get access to the database you need to enter a user id and password. I have a new user who has been getting into the database using an established user's id and password.
I went into the file and found the table with the users, their id's and passwords listed, and added the new person to the table, but I still get an invalid user message when trying to access the database with the new user's information.
I went through the Access Help and tried a couple things it said for adding users to a password protected database, but either I didn't do it right, or the way to add a user is different from what I am getting from Access Help.
Lastly, this database is different in that if I would add a report, it only shows up on my computer when I access the database, the report doesn't show up on anyone else's. That is odd to me, but it is how it works.
Hi, I have been opening password protected access 2003 databases with ASP / ADO for years now. However now we have updated to office 2007 everything gone bottoms up.
I have an access 2007 database (newly made, not converted from 2003), and a fresh asp page. I've gotten the new connection string information for Access 2007 from the internet yet the page cannot open the database.
When I try to open the page the error i get is - "Not a valid password" - 80040e4d. I'm 100% sure the password is correct, the driver is right (the server has office 2007 installed, and the new access driver from the M$ website). Every page i've seen on the internet says that the code I'm using is correct, yet asp still can't open it.
If i remove the password from the database it opens fine, so it's not a corrupt database, or bad path in the code.
If you can shed any light on my problem I would be eternally grateful - been working on it for hours now!
I have to do this and I believe there is VBA code to re-link tables when needed that can be found on the web. My client needs access to everything because he will move on to another developer after this, so what I thought I would do is send him a private file that has the password for the backend and then just write the ADO code needed in the app's front end to connect with the password.
I need to schedule the opening of a MS Access database which is password protected.
I think the best way to do this would be to use schedule a batch process to run, can anyone help with the script to create a batch proccess to only OPEN and CLOSE an MS Access database?
I'm using the DoCmd.CopyObject method to copy a table from my front end db to my back end. My back end db is password protected and it keeps prompting me for the password. Can I somehow send the password in code so that the user is not prompted?
Hi All, I have three excel files (ActualHires.xls, ActualPromotions.xls and ActualSeparation.xls). These are password protected files (with the same password). They are linked to an access database and whenever the files are opened, one must supply the password and click the 'Enable automatic refresh button.' What I was wondering was if this could be done in access with a command button. I have pasted some code below that I found but now I'm getting an error. This is the code:
For B = LBound(BookNames) To UBound(BookNames) WorkBooks.Open FileName:=BookNames(B), _ UpdateLinks:=3, Password:="*******" WorkBooks(B).Close SaveChanges:=False Next B
But when I click the button, I get this error: Run-time error '9' Subscript out of range.
and this line is highlighted: WorkBooks(B).Close SaveChanges:=False
I have a code to relink a 2 backend files at start up. The problem is one of the files is password encrypted.
Code to input the password?
Dim dbsTemp As Database Dim strMenu As String Dim strInput As String ' Open a Microsoft Jet database to which you will link ' a table. Set dbsTemp = CurrentDb
[Code] .....
This part is calling the password protected database
i have found a code that brings up a box when tab or clicking in to a box for editing as below:-
Dim strPassword As String If InputBox("Please enter the password:") <> strPassword Then SomeOtherControl.SetFocus TextBox1.Locked = True End If
its just that need to add a password as well, i have tried to put this in between the <> but this does not work. i would like a message to say incorrect password as well if possable.
I have a login button in which if the username has an empty password or the user is his/her first time to login, another form will appear which is the Set New Password. How can I change the password of that current user, my Set New Password Form has two fields which is 'txtSetPassword1' and 'txtSetPassword2' and an OK button.
The user must enter a new password and a verification password, if the 2 fields matched, the new password entered will change the password in the table. The table name is 'tbl_UsernamesQry'.
I have done it but the main problem is, it changes the other's users password not the current user.
Here is my code for the OK button of that form Set New Password:
Private Sub btnSetOk_Click() If Me.txtSetPassword1.Value = Me.txtSetPassword2.Value Then Me.txtSetPassword1.SetFocus
I have a query that has a total sum , my problem is when i create form all the fields in the query is visible in the form but my total sum doesnt show up, but when i view it in query it works properly.
I don't really know what the symbol really is called i just called it total sum, the E icon in query ....
I am building a search form in my DB. I have got this working by using a text search box on the main form which then links to a subform that shows the results. This works great, however, when the form is first opened, it shows all the records that be searched. Is there any way that I can stop this? I just want the subform to be blank until a search is ran.
I currently have a database which has a fairly simple form linked directly to a table, which records staff attendance information.
It generally works really well, however there is one thing I would like it to do, which is be able to hide certain records from view (rather than delete them completely).
I have a checkbox on the form (bound to a corresponding field on the table) called chkHide (the field in the table is called hide), which is not visible in form view; I have a button that is visible and when pressed by a user it will change the value of the check box to True.
So far so good. However, I would then like to have the form refresh and when it does so no longer show the record to the user (so it looks like it has been deleted, but in fact that record remains in the table).
I have tried applying a filter on load, but I don't know what expression to put in the Filter on the Property Sheet - - I have tried [Hide] = Is Null, but that isn't right. I have also created a Query where I have set the criteria for the field 'Hide' to Is Null and then put the name of the query in the Filter box - that doesn't work either, as it will let me put in new records but not let me see any of those put in before the form was refreshed.