Forms :: Pop Up Form To Requery Two Other Forms

Feb 4, 2014

I new to this form and to access and hope to find an answer to my problem.

I have 3 tables and 3 forms

Table 1 - Form 1 --- Psych Patients
Table 2 - Form 2 --- Med patients.
Table 3 - Form 3 --- Primary Doctors.

Each form has a combo box with a list of Primary Doctors. If doctor is not in the list then we have the option to enter new information via Pop up form (form 3). At close the Pop up form requerys the cbo box.

Is there a way to use Form 3 (pop-up form) to re-query both forms at the same time even if only one of the forms is open?

FYI, Table 1 and Table 2 contain different information and the only thing both table have in common is the primary doctors.

As of now my code in the pop Up is:

Private Sub Form3_Close ()
Form_Form1!cboPhy.Requery
End Sub

Is the only alternative to create another form for the physicians and use it for Form 2?

View Replies


ADVERTISEMENT

Forms: Requery A Subform From Another Form

Apr 18, 2005

I need to requery a subform from a third form and can't seem to get it to work.

frmForm1 has frmAddress as a subform. The button cmdReviseAddress opens the form frmUpdateAddress where all of my validation work is done and the new record is added.

However, the new address is not being displayed in the subform.

If I use the command
Forms![frmTest]![frmAddress].Requery
it works fine.

The problem is that I want to be able to frmAddress on any form, and need to pass the name of the main form (in this case frmForm1) as a variable.

If lsTemp = "frmForm1", the statement
Forms![lsTemp]![frmAddress].Requery (and every variation using brackets and quotes that I can think of) fails.

Any ideas?

Thanks!

View 3 Replies View Related

Forms :: Requery A Control On A Form Pulled From Subform

Feb 6, 2014

how do you requery a control on a form pulled from subform? i've tried but it doesnt work

Private Sub Form_AfterUpdate()
[Forms]![Project_Details]![subform].[Form]![Text119].Requery
End Sub

View 6 Replies View Related

Forms :: Requery Not Working In A Form With Combo Boxes

Jan 30, 2015

New to access...just build a form, in which there are combo boxes....cascading of boxes was done.

Now the problem is I want afterupdate function to get activated when user changes the value of one combo....for which I have created a code in code builder... see the code... I think I am making a mistake in writing the code to requery...

View 5 Replies View Related

Forms :: Requery List Box In The Form After Combo Box Updated

Jul 11, 2015

How do I requery the list box in the form after the combobox is updated? the name of the combo box is txtFilterClassName.

View 3 Replies View Related

Forms :: Get A Form To Requery Data Specified Prior To Opening

Jul 21, 2013

I have a main form "FrmTimesheetEdit" that I open in edit mode to review data in a query that uses two tables TblEmployee and TblTimeSheet. The TblEmployee has two fields called EmployeeID, and Employee. The Tbltimesheet table has a field "Weekendingdate" and "EmployeeID".Prior to loading the mainform I launch a form "frmEmployeeReportRange" that allows me to specify via combo box the Employee I am interested in and also the time periods I am interested in being "Beginningdate" and "EndingDate" These in turn are criteria for my query that supplies data to the main form "FrmTimesheetEdit" Everything seems to work ok.

However the first time I open the main form It open a form/window saying "Enter parameter Value" for EmployeeId, BeginningDate and Ending date respectively. Then the subform loads "frmEmployeeReportRange" which allows me to specify Employee plus beginning and ending dates. I select Employee from the combo box say "Emp1" and specify Beginning and Ending dates of 1-Jun-2013 and 30-Jun-2013. I then make the form invisible and the mainform opens up.I do this but get no records. If I close the main form "FrmTimesheetEdit" and reopen it the subform pops up as expected. It is preloaded with the data I entered the first time i.e. Emp1 plus 1-Jun-2013 and 30-Jun-13...If I leave the dates the same but select the next employee "Emp2" and them make the form invisible the mainform opens in edit mode as expected but with the records and dates specified for Emp1.

Bottom line it would appear that although the filter data is specified for the query that feeds the main form it is not requerying prior to opening the form. I have tried having the "frmEmployeeReportRange" launched as a VBA event on each of 'On Open' , 'On Load' and 'On Current' but no matter where I put it the results are the same in that the mainform is not requerying the data prior to opening.

View 5 Replies View Related

Forms :: Requery Form And Subform After Popup Form Close

Aug 19, 2013

I tried all sorts of permutations of the requery command but apparently I'm too dense to figure it out.

Form 1
subform 1 > button to open pop up form
subform 2
subform 3

I'm trying to requery a combo box (inside of subform 1) based on a table that is updated from the pop up form.

On pop up form close, what's the correct syntax for re-querying subform 1?

View 2 Replies View Related

Forms :: Split Form Combobox Requery Based On Row Selected

Oct 2, 2013

I have a split form that was not made by wizard. On the form part I have a combobox that is unbound to the form data set. The combobox has a query row source that is based on the current row selected. I want the combobox to have an up-to-date result based on which row is selected.

If I set the combobox to requery in the form_current event then I get what I want. I don't want to put up with the little delay that is generated every time a user changes rows because of the requery, though. I only want the requery to happen when they use the drop-down menu.

I have the requery in the gotfocus event of the combobox on the form. I mostly get what I want this way, however if they select an item in the drop-down list, then choose a new record in the datasheet, then try to use the combobox again, the combobox is not refreshed (because it never lost focus?).

To get around this, I've tried to setfocus to something on the form in the on_current event, but access gives me an error: 'Access can't move focus to the control btn_Refresh'.How can I get the combo to requery only when users are about to use it?

View 4 Replies View Related

Forms :: Update / Requery Subform Through On Close Event Of Another Form

Aug 2, 2013

I am working with 2 forms and a subform.

frmTaskTracker -subfrmInbox (Datasheet View - based on a query)

frmUpdateInboxItem

subfrmInbox displays a summary of tasks on a task list. The user navigates to frmUpdateInboxItem from frmTaskTracker. After updating a record from frmUpdateInboxItem, it is possible that it the record in question will no longer meet the requirements to have it listed on subfrmInbox.

I have attempted to add code to the on close event of frmUpdateInboxItem to requery the sub form on frmTaskTracker but am not getting the syntax correct.

correct my code? Alternatively is there is a more correct way to do this, I'd be happy to learn it.

Code:
Option Compare Database
Private Sub cmdClose_Click()
Me.[frmTasktracker]![subfrmInbox].Requery
DoCmd.Close acForm, "frmUpdateInboxItem"
End Sub

View 5 Replies View Related

Forms :: Requery Control On Subform From Main Form - Refresh List?

Sep 8, 2014

I have a form called Add New Delegation, i have combo box of Institution names on the main form and a subform for Agreements discussed. with a combo box called agreements. I successfully cascaded the combo boxes so that the agreements discussed on the subform are filtered by their respective institutions on the main form. However i am unable to refresh the list each time a new institution is selected as the Macro will not allow me to requery a control on the mainform from the subform..

View 2 Replies View Related

Forms :: Create New Record In Form - How To Requery Subform To Link Properly

Apr 2, 2013

I have a form (frmAddManifest) with a subform (subfrmManifestTransporters).

When creating a new record, I can enter data into frmAddManifest, but the subform doesn't update to link with the record - I presume it's because the record from the main form hasn't been completed yet.

Is there a way to requery the form and/or subform so it stays on the record I was working on, and link the subform properly?

View 4 Replies View Related

Forms :: Requery Form After Making Changes In Another Form

Sep 17, 2014

I have a form that shows a companies engagement with our company. If someone wants to edit the details of that company (address phone number etc...), they click the "edit" button, which then opens a form where edits can be performed.

After the edits are done, the user clicks a save and close button which runs docmd.runcommand acCmdSaveRecord, and returns to the companies engagement form.

When I return to the company engagement form, I would like to see the companies information reflect the changes that I just made. Currently, I can only do this by exiting the form and re-opening. I have tried using Me.Requery in the OnGotFocus, Activate and Current events to no avail.

I should mention that I have a company combo box with multiple columns that are used to display address, postal code, etc... in textboxes on the same form.

View 1 Replies View Related

Requery Forms

Apr 19, 2006

Hi All.

I have been reading a earlier post regarding requerying forms


Forms are displayed on other form by means of a SubFormControl. It is the name of the SubFormControl that is needed. This is often the same as the SubForm but it is *not* a requirement. In your case you will be using two SubFormControl names, one nested within the other. Just for the record, you Requery forms and not fields.

How do you find out the name of the SubFormControl. I am trying to refresh sub forms and I am trying to use the following code.

Private Sub Form_AfterUpdate()
Forms!MainFormName!SubFormControl.Form!SubSubFormC ontrol.Requery
End Sub

I have 2 forms, "frmMainClient" and a subform "frmjob" and I have a command button on the "frmJob" which brings up a pop up form " frmJobNew". I fill out the fields and save via a command button.

When I look at the "frmJob" the new record I have entered is not there. It is there if I close all the forms and then open them again.

I know I need to requery the forms but I am not too sure how this is done.

Many thanks in advance.

View 1 Replies View Related

Forms :: Requery Not Clearing Box

Mar 13, 2013

i have a form with cascading combo boxes, all of which are set to requery the combo boxes below, however i have one which is Service SubType, and it should requery Provider and Subjective, however it only clears the Provider and the previously selected subjective is still there, when you click on the downarrow it does give you the new list of subjectives.

my code looks like this:
Private Sub cmbServiceSubType_AfterUpdate()
Me.cmbProvider.Requery
Me.cmbSubjective.Requery
End Sub

how to get it to clear the boxes I have asked it to requery.

View 1 Replies View Related

Forms :: Cannot Requery Combobox On A Subform

Apr 2, 2014

I have a main form that identifies a Client File: frmClientFile (Single Form)

On the main form is a subform for Cases: subfrmCases (Continuous form)

Also on the main form below the Cases subform is a tab control that contains additional subforms to view/update different aspects of a case: subfrmCaseClients (Continuous Form).

The way this operates is that the user first chooses a file using a combobox on frmClientFile.

The subfrmCases is linked to the main form (using the caseFileID) and filters correctly.

The subfrmCaseClients is then linked using some hidden text fields on the main form (using caseFileID, CaseID) and this filters correctly.

On subfrmCaseClients is a combobox (cboClientID) that I need to requery based upon the Case Row selected on subfrmCases.

I have tried numerous combinations of options to force the requery by trying to apply a macro on the following:

OnCurrent, OnSelectionChange, OnChange and AfterUpdate events to no avail.

If I hit F5 to refresh the entire page the combo box gets updated as expected.

How do I get the Requery to work programatically? Is this even possible?

View 2 Replies View Related

Forms :: Set Focus And Requery Data

Mar 17, 2013

I have a Dynamic Search form, which I use to search for client, on the double click it takes me to the client, at which point I have the Forms Visible set to False.

When I click on a button to open that Form, the Visible turns back to True, however it shows my last search results, how do I clear it so that when I call it back up it is ready to search again, and my focus is set to the SearchFor box.

View 3 Replies View Related

Forms :: Combo Box Recordsource Requery

Jan 7, 2014

I have a recordclone combo box for navigating between 240 company records, so the form will go to the correct record on updating the combo. Instead of clicking on the down button and scrolling through the list, I would like to enter letters into the box and update the record source automatically as I enter them.

I'm not sure what events to use since there appears to be very subtle differences between them (eg between 'on dirty', 'on change' and 'before update').So when I type in 'T', only those companies that start with 'T' are viewed in the combo box.I have discovered the VBA 'dropdown' command which would be useful for the user.

Code:

company.dropdown
Table_Company
Company_ID: autonumber
Company_name: text

The name of the form is "form1" and the combo box name is "company".The record source for the combo box is "query_company". In the form the ID field is hidden and the company name is not hidden.The criteria I have for the combo would be something like this.

Code:

SELECT Table_Company.Company_ID, Table_Company.Company_name
FROM Table_Company
WHERE (((Table_Company.Company_name) Like [forms!]![form1]![company] & "*"));

View 3 Replies View Related

Forms :: Requery Subform After Filter

Dec 10, 2013

I have a main form (Frm ViewModel) with a subform (Frm class_attributes) in datasheet-mode based on a Query.Frm ViewModel has two controls, a ComboBox Select Model (presents you with a list of data models ) and a ComboBox Select Class (presents you with a list of Classes selected from a class-table, based on the model-id derived from the Select Model ComboBox). The subform Frm class_attrbutes shows you all class attribute combinations based on the model-id derived from the Select Model ComboBox.After the initial selection of the classes and attributes, the subform Frm class_attribute can be filtered on class by the Select Class ComboBox.

As long as I just switch between models through the Select Model ComboBox, it all works fine. The subform Frm class_attributes is updated (Requery) correctly.The problems start when I filter the subform Frm class_attributes, either through VBA OR by using the GUI filter possibilities of the sub form itself.

Private Sub select_class_AfterUpdate()
[Forms]![Frm ViewModel]![Frm class_attributes].[Form].Filter = "class.object_name ='" & [Forms]![Frm ViewModel]![class_name] & "'"
[Forms]![Frm ViewModel]![Frm class_attributes].[Form].FilterOn = True

The filter works fine, but once youve used it:
- The filter stays active, even when turned off, so when you Requery the subform it reutrns results with the original filter.
- The filter is removed, but now the subform after requery keeps showing the selection of classes & attributes for the model_id where the filter was first set.

I tried all possible combinations of FilterOn = False and .Requery but it doesnt solve it. I tried reassigning the RecordSource but since the underlying SQL is extensive (a few joins) Access seems to have a problem with this

[Forms]![Frm ViewModel TST]![Frm class_attributes].RecordSource = "SELECT [class.hierarchy],
[class.object_name], [class.technical_name], [class.definition], [parent_class.object_name]
AS ParentClassName, [parent_class.level], [A.AttributeName], [A.AttributeTechnicalName],
[A.AttributeDefinition], [A.AttributeType], [A.AttributeTypeDescription] FROM [parent_class]

[Code] .....

I tried making the sub-form a bound form by manually linking the masterfield to the Select Class ComboBox..I played around with the On-Focus and OnCurrent-events

View 4 Replies View Related

Forms :: Requery Unbound Combobox On Mainform

Jul 30, 2014

I have a form "Clientfrm" with a field, "ClientID".

I have another form, "HomePage", with an unbound combobox with rowsource "ClientID" from Clientfrm. Along with that, I have an Open Form button that pops up "Clientfrm" to display existing data if an existing ClientID is typed.

SITUATION: A nonexistant ClientID is typed into "HomePage", a blank "Clientfrm" pops up with the field "ClientID" blank on the Clientfrm. Once filled out and closed, I am back to the "Homepage" to enter another "ClientID". However, the combobox does not display the new "ClientID" until the "Homepage" is closed and reopened. How do I fix this?

I tried the Me.ClientID.Requery on the On change event of the combobox of the "Homepage", but that is not working. What should I do? SHould I instead put that code in on change event in the "ClientID" field in the "Clientfrm?"

View 14 Replies View Related

Forms :: Option Group Requery 2 Yes / No Columns

Mar 12, 2013

I have would like to have a option group requery a list box with 2 yes/no columns as the criteria.

First Option = No criteria
Second Option = Yes in first column only
Third Option = Yes in second column only

So far I've been able to get option 1 and 2 to work, but I've not been able to define the same value to the third option, some of the values in the 2 columns over lap so using a single option doesn't seem to be the right method.

View 1 Replies View Related

Forms :: How To Refresh / Requery MSysObjects In Combobox

Jun 18, 2015

I set up several combo boxes to display Tables from msysobjects. The record source is using a WHERE clause to display certain tables both Linked and Local. Occasionally, when clicking the dropdown arrow, the box only displays local tables. This situation seems not to matter whether tables have been newly linked or unlinked. despite having both a me.requery and a me.refresh in the code and/or even clicking the Refresh All button on the ribbon menu, the form does not seem to update the combo box to display both linked and local tables.

In further testing, it seems that it is not a form issue because I took the SQL statement I used as the record source and created a new query with the sql string. The query behaved the same as the combo box, only listing out local tables.

My current work around is to close the database and reopen, then all is well. Hopefully there is another way to get the linked tables listed without this drastic step.

Don't think it's necessary, but here is the sql statement. Type 6 is linked.

Code:
SELECT msysobjects.name
FROM msysobjects
WHERE msysobjects.[flags] = 0
AND msysobjects.[type] in (1, 6)
AND Right([name],7)<>'_SOURCE'
AND Right([name],4)<>'_OUT'
AND msysobjects.name not in ('tblImport','tblImportFormats','tblUniversal') OR msysobjects.database=gblprojectname()
ORDER BY msysobjects.name, Right([name],7);

View 9 Replies View Related

Forms :: Requery Subform After Deleting A Record

Nov 8, 2014

I'm trying to execute some lines of code right after deleting a record in a subform, with a right click on the row I want to delete (the idea is that if a record is deleted the other ones should be updated by module1.tblUpdateLatestDocuments).

I've tried putting this code into the events On Delete and After Del Confirm of the subform, none of that worked.

Code:
Option Compare Database
Private Sub Form_AfterDelConfirm(Status As Integer)
Call Module1.tblUpdateLatestDocuments
Me.Requery
End Sub

Private Sub Form_Delete(Cancel As Integer)
Call Module1.tblUpdateLatestDocuments
Me.Requery
End Sub

Aren't there any events that I could use right AFTER the record has been deleted?

View 10 Replies View Related

Forms :: Requery Subform After Exiting Popup

Aug 3, 2014

I have my main form which is f_main.

On there is a Subform called subfrmFront and that has a source object of the form f_front

A button on f_main opens up a popup. In this popup, the fields I am updating all relate to the same records that are being displayed in the subform. Everything updates OK in the popup (i.e I can see in the table that the updated information is in there), but the subform back on f_main still has the old data in it.

I need to requery that subform to show the new data I just inputted.

If I close f_main and re-open it, the latest data is in there, but surely there is a way to make sure it updates on the close of the popup form.

View 14 Replies View Related

Forms :: Swap Values In Comboboxes With Requery Applied?

Jan 13, 2014

I have two comboboxes on my form. When the value of the first combobox (SourceWH) changes it performs a requery on the second (DestWH) as the drop-down list needs to be filtered depending on the first value. I have this working fine but my problem arises when I need to be able to swap the values of each combobox. I have created a command button which stores the value of each combobox and then swaps them but my problem is that if I click the button the second combobox becomes blank. I guess this is something to do with the requery taking place after the value of the first combobox is updated but am unsure how to rectify this problem.

The first combobox has the following expression in the expression builder:
Action Argument
Requery DestWH

The command button has the following code:

Private Sub Swap_Btn_Click()
Dim SourceValue, DestValue As String
SourceValue = Me.SourceWH.Value
DestValue = Me.DestWH.Value
Me.DestWH.Value = SourceValue
Me.SourceWH.Value = DestValue
End Sub

View 3 Replies View Related

Forms :: How To Put Cursor On Newly Created Record After Requery

Apr 14, 2015

I launch a 'CreateNewRecords' form from a 'MainForm' form. When the 'CreateNewRecords' form closes, the new record is visible on 'Main Form'.The underlying query is unsorted, so this code in the AfterUpdate event of 'CreateNewRecords' puts the cursor on the last record displayed on 'MainForm', which is the newly created record:

Forms!frmMainForm.Requery
With Forms!frmMainForm.RecordsetClone
.MoveLast
Forms!frmMainForm.Bookmark = .Bookmark
End With

However, I intend to sort the underlying query, which means that a newly created record may appear in the middle of the records displayed on 'MainForm'.

What I want to have happen is that after a new record is created by 'CreateNewRecords', the underlying query is requeried so that all current records are displayed on 'MainForm' but also that the cursor rests on the newly created record (rather than default to the first record).

View 7 Replies View Related

Forms :: Return To Previous Current Record After Requery

Jul 30, 2013

I have a Main form that has button that loads a new Pop Up form for entering new data that will display in the Main form. When all the data is entered I click on a button that Saves the data and exits the form and then runs Re-query on the main form returning to the record that was current before the requery.

I have the following code:

Private Sub cmdSaveTradeAndExit_Click()
DoCmd.RunCommand acCmdSaveRecord 'Save the current record
DoCmd.Close 'Close the current form
Dim CrId As Integer
CrId = Forms!frmTransactionMainActivePopUp.CurrentRecord
Forms!frmTransactionMainActivePopUp.Requery
DoCmd.GoToRecord , Forms!frmTransactionMainActivePopUp, acGoTo, CrId
End Sub

But I am getting the following error:

Run-time error '2498':

An expression you entered is the wrong data type for one of the arguments

And the following is in yellow in the debug:

Code:
DoCmd.GoToRecord , Forms!frmTransactionMainActivePopUp, acGoTo, CrId

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved