I want to append/populate all data from one table to subform?
It is possible?
I managed to populate data from one table to another but my relations between form and subform isn't good, because record that is supposed to be filled as the "link master fields" is left blank.
I have:
Tables: Customer and Orders
Relationship: Customer ID is the primary key in Customer and is a foreign key in order table.
I need to create a Form with contains all the customer info from the customer table, as a drop down list. Once the customer is selected, all their orders should appear in a subform. At the minute I can get a form to work which shows all the orders but you have to go to the next record so see the order. For example it will say John smith and one order. The next record will be John smith again and their second order in the sub from.
I have used access in the past and I am fine with creating everything apart from the drop down. I am just a bit lost with the structure.
I've got an access front-end database running on Access Runtime on a Terminal Server with a back-end on a data server both of which are hosted by a remote company and accessed via Terminal Services. All is well and the database is working fine but because this is a cloud system I need a way that I can easily delve into the tables on the back-end without copying it down locally from the cloud each time (I've set up an "administrator" option so that this would be available to limited users). I've got the front-end forms working as I'd like but I have quite a few tables and I'd like to avoid creating a separate form for every table. I've been able to populate a combobox on my form with the list of linked tables and I'd like that when I choose a particular table from this list that the whole table is then visible within a subform below in case I need to manually intervene with the data for any reason.
View 1 Replies View RelatedI have a subform that is essentially a blank table which users can create rows depending on how many they require and fill the table in.
I then want to be able to append a main table with the records that have just been created in the subform's table... but here is where an issue lies.
Main Table has 6 columns... subform table has 5.
I already have the value to put into the 6th column but Im just not sure how to do it... the value is obtained from the original form.
For each record, copy that record into the main table + adding another value into the extra column.
Is this possible? or doable?
In my UpdateForm I have 3 fields. PartNumber, Description and SerialNumber. I use 2 tables for these. My MainTable and PartsList Table.
In my PartsList table I have the list of PartNumber in Column (0) and Description in column (1).
In my MainTable I have 4 fields: TransactionID (autoNumber), PartNumber(text), Description(text) and SerialNumber (text).
Now, In my UpdateForm I want the user to just select the PartNumber with a combo box (that also show the "Description" (I created this using the combo box wizard)). But I want to auto populate the field in my "Description" text box every time the user will enter new record and will also update my MainTable with all the values they entered in my UpdateForm.
I tried this codes in the after update of PartNumber combo box (properties):
Description = Partnumber.Column(1)
I tried also:
me.Description.value=me.PartNumber.column(1)
both codes unsuccessful.
I have 3 inputs based on which i'll fetch records from table in a subform for the given input criteria. Please let me know how to populate subform programmatically?
I tried source object property and form.recordsource property. It gives me some error or the other. let me know the right syntax to do the above mentioned.
Thanks in advance,
jwala :)
I have a form where a different form opens up when a user clicks a certain button. What I’m trying to do is assign a field value from form1's subform to a field on form2 and it’s telling me "Run-time error ‘-2147352567 (80020009)’, You can’t assign a value to this object." I'm new to VBA, but think I'm on the right track. Could someone please tell me what I’m doing wrong.
The code I'm using is: Me.txtStoreNo = [Forms]![frmCDRData4REF]![sfrmCDRData4REF].Form!txtStoreNo
Hi,
I have a form with a subform, Both of them are based on a query.the form
displays a productid and its details ,and the subform has matching
productnames for that productid.
Now i have a search on the main form wherein the user enters ( search
for) the productid, once they click search button, the form should show
that particular prod id and details and subform loaded accordingly with
that productid matches...seems simple but how do i code this in VBA??
Basically populating the form and subform with data based on search..
i am using ODBC coonxn with backend oracle tables..
any help would be highly appreciated!
Thanks
I have the following tables:
tblProjects
ProjectsID (Primary key - exclusive)
ClientProjects
tblProjectsDetails
ProjectsDetailsID (Primary key)
ClientProjectsDetails (Secondary key)
tblQuotes
QuotesID (Primary key - exclusive)
ClientQuotes
Service
Rate
tblQuotesDetails
QuotesDetailsID (Primary key)
ClientQuotes (Secondary key)
Service
Rate
I have the following forms:
fmProjects
fmProjectsDetails (parent/child)
fmQuote
fmQuotesDetails (parent/child)
When I add a project I need to have data from the tblQuotes and tblQuotesDetails to populate tblProjects and tblProjectsDetails respectively.
It is very easy to populate tblProjects from tblQuotes since it is a single record. Therefore I use:
Me.ClientProjects = Me.ClientQuotes
:confused:
The question is: how to match the data of the 2 subforms? Since there will be more than one record per subform?
Any help is really appreciated.
I have an unbound combobox on a form that is used to filter the records of a subform based on who they have been assigned to. The combo box is based off of a query to the personnel table and utilizes a UNION querry to add the option "**ALL**" with a id number "111111" as the first option in the combo box.
In other words: the combo box has a list of names to choose from and the word "ALL" at the top as the first selection. The idea is that when "**ALL**" is selected, the subform should display all records regardless of who they have been assigned to. I'm trying to accomplish this with VBA. I've started developing the code to try to impliment this, however currently when "**ALL**" is selected, I'm getting a datatype missmatch that seems to be caused by my use of recordset.
Option Compare Database
Option Explicit
Private Sub cboTaskListName_AfterUpdate()
'On Error GoTo cboTaskListName_AfterUpdate_Err
Me.Refresh
[code]...
Also once the queried records are saved into the record set, how can I communicate that to the subform so that it displays them?
I have a subform which is for payment, it has a calculated field which is called TotalPayment, with expression:
=Nz([Forms]![Reservations2]![Days]*[Forms]![Reservations2]![Rate],0);
in the control source. When a value is displayed in this field an ID number should be assigned to the PaymentID field, but this does not happen, the field remains null.
What I'm trying to do: I have created an unbound field within a subform's footer to calculate the average of the displayed record values. The subform is in datasheet view. The records are returned based on a query with a relationship between two tables. I need the calculated data (which I currently have displayed on the main form) to populate within the master table.
I can't figure out how to automatically do this. I created a simple command to get it there, but I'd like the user not to need a button to display a calculation.
Main form based on TableA; subform based on TableB.
Here's how I have it set up (Btw, I suck at SQL I just figure this is easiest to read):
Query SQL looks like this: SELECT tblB.Field1, tblB.Field2 FROM tblB.Field1 INNER JOIN tblA ON tblB.Field1 = tblA.Field1
Main form: unbound txtbox = [Forms]![frmA]![subfrmA].Form.[txtAvg]
The field that is averaged is tblB.Field2. There are potentially a bunch of records displayed in the subform.
I need that [txtAvg] field to save to TableA. My command button is simply Me.tblA.FieldName = Me.unboundtxtbox. I'd like to do away with that.
I tried to use the on current or on load event for the main form; but the calculated field value is 0 until it calculates it. It seems like there is a short delay before the value shows up on the form at which point the on current or on load events don't pick up the calculated value; just the 0 that is initially there.
I have a continuous subform with an unbound Concat textbox and would like to populate another field for each record with the results with a main form button onClick event.
How do I accomplish this?
I have a form that contains a subform. On the main form, there are 3 fields: [IncidentNumber], [OpenDate] and [OpenTime]. The subform, [CtrlLog Detail] , contains the log entry details for each incident number. Every incident number can have many log entries. Two of the fields on the subform are [EntryDate] and [EntryTime]. The fields work correctly and the forms are fine.The issue Im having is when a new incident number is created the [OpenDate], [OpenTime] and [EntryDate], [EntryTime] MUST be equal because of some filter queries for statistics. Right now the user must physically type in the date/times in these 4 fields when they create a new incident number, which means I'm having lots of data entry errors.
Using default value on either [EntryDate] or [EntryTime] on the subform doesnt work because it doesnt create a primary key for the underlying table and the subform will not allow any other entry (due to some other linked values) until that PK is created. The forms are based on tables linked by [Activity_ID] as the primary key. I want to create some VBA code to see that if the Incident number is a new number (meaning the user must type in the new incident number creating the primary key for [Activity_ID]), that access will automatically populate the [EntryDate], [EntryTime] fields to match the [OpenDate], [OpenTime] fields on the main form. The user will manually populate the [OpenDate], [OpenTime].
If the number is an existing number (and the user is simply adding a log entry to the incident number) then I want [EntryDate], on the subform to default to the system date/time ([EntryTime] should remain blank for user entry) while keeping [OpenDate], [OpenTime] unchanged. When the [EntryDate], [EntryTime] fields are populated on creation of a new incident number, I want the PK for the underlying table ([Log_ID]) to be generated.
I have a main screen that has a tabbed form in it. Each of those tabs has a sub-form in it that displays information and allows some information to be updated.
In one tab I have a query based sub-form that returns information related to the project. This information cannot be manipulated or changed as it comes out of a company managed database. I would like the analysts to be able to add more granular information to a new table by inputting information in a dropdown field for one of the new table fields, but utilizing two of the existing sub-forms fields as identifiers in the new table.
I have a continuous subform that displays lots of questions. This specific form has 10 questions on it. Each question has one answer and the users are required to select one answer for each question. I am trying to do some data validation before the data gets saved to my table to ensure that users have answered all the questions. I found some very useful code online and tweaked it to suit my needs. The validation works perfectly on subforms with only one question, as I have some other tabs that use it.
On the specific form that has the issue, the validation works as expected when no question has been answered, but when a user answers only one question and leaves the remaining nine questions blank, the validation does not work. I guess it is as a result of the continuous form repeating the different questions and ms access thinking that the data entered for one question alone is complete when it actually isn't.
Code:
Private Sub Ctl4_frm_Staff_Exit(Cancel As Integer)
Dim ctrl As Control, EmptyStr$
For Each ctrl In Form_subFrm_staffQuestion.Controls
If InStr(1, ctrl.Tag, "Required") > 0 Then
If IsNull(ctrl.Value) Or ctrl.Value = vbNullString Or Len(ctrl.Value) = 0 Then
[Code] ......
I have built a form that holds details of training records. What I want is when a drop down is selected in the main form, that it will populate some of the fields in the subform. I have this working at the moment, that for example, when a certain course is selected, that their modules will appear in the subform. Where my problem arises is that I have a relationship between two tables that I want to appear on the subform, so that details can be filled in on the subform against the list of modules that automatically appear.
View 2 Replies View RelatedI've got a Parent form (frmProspectDetails) with a subform linked (fsubProspectSkill).
This form is for users to enter general information on a prospect (names, position, height, weight, etc) on the parent form and skill levels on the subform.
Currently the subform is set so the user has to manually select the specific skill set for the prospects position, and then enter a value for each skill level(1-99).
I'm trying to get the subform to auto populate with a specific skill set based on the position selected in the parent form, so the user only needs to input the skill level without selecting each specific skill.
This data is then stored in a table (tblProspectSkill)
To add, I've created a form (frmPosition) that lists the specific skills set for each position.
I'm not sure how to get this subform (fsubProspectSkill) to auto populate with the specified skill set from frmPosition.
I have a tabbed form from which the user can select a contact's record from a subform on the first tab, click a edit command button, and the unbound text boxes on the top of that tab populate. The user can then click the second tab with employment history which has blank unbound text boxes and another subform which is linked by the contact id to the first tab.
The user can select a record in the second tab, click a command button and the text boxes populate no problem. The problem comes when the user changes the contact on the first tab, and then tries to edit a record on the second tab. Then I get a run-time error '-2147352567 (80020009)' saying the value you entered isn't valid for this field. Why it would work the first time by not the second?
I have 2 questions/problems:
1. I want to populate a list box with all the Tables Names in my Database using VBA.
2. I also want to create another List Box or Grid (or any thing that will show table data) that when i have select a Table Name (See above (1)) it will show all the data in that table in the List Box. Was thinking some kind of SQL using vba to populate the list box?
Any ideas or help will be much appreciated
Richard
I have a form called frm002_PAF_MonitoringMAIN and on this form I have a subform called frm002_PAF_Monitoring. The subform has a button to another form for contact details called Contact_Details. The Contact_Details form opens with the details of the person who I have selected on frm002_PAF_Monitoring. There are some fields on frm002_PAF_Monitoring that I would like to be populated on Contact_Details when opened, like FirstName and LastName. How can I do it?I have tried on afterupdate event on Contact_Details below but those don't work:
Me!FirstName=[Forms]![frm002_PAF_Monitoring]![FirstName]
Me!FirstName=[Forms]![frm002_PAF_MonitoringMAIN]![frm002_PAF_Monitoring]![FirstName]
Me![FirstName].Value=[Forms]![frm002_PAF_Monitoring]![FirstName]
Me![FirstName].Value=[Forms]![frm002_PAF_MonitoringMAIN]![frm002_PAF_Monitoring]![FirstName]
I have one database containing several tables, two of which are associated to this inquiry:
1) tblCategories
Contains two columns: CatID and Category Name
2) tblPending
Contains many columns of data obtained through upload from a web form including a column to capture the CatID and also a column for Category Name.
I wish to populate the Category Name column based on the results of data uploaded into CatID column
How is this accomplished? This is inherited project and I have very little experience with Access so just limping along...
Specific instruction much appreciated.
Thank you.
I have problems understanding lookup tables, especially how to populate them with data. I'm working on an exams database, and have many such tables...
Table for Students
Table for Subjects
and a lookuptable for studentsubjects
Table for Classes 1, 2, 3, 4
Table for Subjects Eng, Math, Geo, Chem... 11 subjects in all
and a lookuptable SubjectClasses
Having inserted data for all subjects and all classes, should I then go ahead and Insert data for SubjectClasses? There will be 44 items!
Even more appalling, studentsubjects table will have (no of students * 11) for my small school, it will be 1,760
Is it possible to populate a single combobox with data from 3 different tables.
I have a table called observations (for observing deer), in that table is a field called Location, I have 3 other tables that list possible locations t_foodplots, t_stands and t_section.
I would like to have a combobox called location on my observations form that will allow me to select the proper location from one of those 3 tables, the choices would be something like this...
Section 1
Section 2
Section 3
Stand 1
Stand 2
Stand 3
Foodplot 1
Foodplot 2
Foodplot 3 etc....
The chosen value would be stored in the t_observations "location" field.
How to automatically populate the bound text box with data from a table for a specific entry. This is the code I wrote
Private Sub ListBox_DblClick(Cancel As Integer)
Dim ListBoxSel As String
ListBoxSel = Me.ListBox.Value
Call proc_Update_TxtBoxes(Me.ListBox.Value)
DoCmd.Close
[Code] ....
I have 5 tables in access 2010, 4 of them have data in them and I need to populate the 5th table with all data from the 4 tables. I know you have to create a Union query, but i dont know the sql statement
Table 1 - data
table 2 - data
table 3 - data
table 4 - data
table 5 - combine data from table 1, table 2, table 3, table