Forms :: Populate Textbox Based On Others Within Form Being Null Or Filled
May 24, 2013
I am fairly new to Access and trying to populate a text box based on whether other textboxes throughout the form contain a date or are null, so as I update the progress of work the textbox that I have located in the header will indicate the status of work flow, this is what I thought might work but I seem to be doing something wrong.
Code:
Private Sub Form_AfterUpdate()
Status = IIf([Date_Raised] Is Null, "New", "")
Status = IIf([Date_Raised] Is Not Null, "Open", "")
Status = IIf([Approved_Date] Is Not Null, "Approved", "")
Status = IIf([Actioned_Date] Is Not Null, "Actioned", "")
Status = IIf([Tested_Date] Is Not Null, "Tested", "")
Status = IIf([Closed_Date] Is Not Null, "Closed", "")
End Sub
Code: Private Sub Check253_AfterUpdate() If Me.Check253 = -1 Then Me.Text254 = DLookup("[Lot]", "[tblAutoGen]", "[Inuse] = -1") Me.Text256 = DLookup("[Exp]", "[tblAutoGen]", "[Inuse] = -1") Me.Text258 = DLookup("[Lot]", "[tblEthanol]", "[Inuse] = -1")
[Code] ....
I am using the code above on my form and it seems to be working. My question is there a way to populate a textbox (Text255) based off a login?
For example, lets say JSmith is loged in to the computer. Is there a way that JS could populate Text255? If then say JCarter is logged on, the JC populates Text255.
I have created a form using access 2000. So far, this form already has data and dates in a combox in this format: mm/dd/yyyy.
In the AfterUpdate of the date combobox, I did this:
If graduation_date = #2/1/2004# then Text_Graduation_date = "dated this first day of february two thousand four." End If End Sub
In addition, I have defined many other dates as well using the code above. It works well when I choose the date form the combobox, the other textbox populates, but there are so many more dates in the combo!
Is there a way to auto-populate the textbox with the appropriate text as I scroll through the form?
I have a from based on a query. This form has a textbox called CUM_GPA which contains numbers in this format: x.xxx
In the After_update of CUM_GPA is this code:
Private Sub CUM_GPA_AfterUpdate() If Division = "GRADUATE" Then Honors2 = "" ElseIf Division = "UNDERGRADUATE" And CUM_GPA < 3.2 Then Honors2 = "" ElseIf CUM_GPA >= 3.2 And CUM_GPA < 3.5 Then Honors2 = "*" ElseIf CUM_GPA >= 3.5 And CUM_GPA < 3.8 Then Honors2 = "**" ElseIf CUM_GPA >= 3.8 Then Honors2 = "***" End If If Division = "GRADUATE" And School = "SCHOOL OF EDUCATION" And CUM_GPA >= 3.7 Then Honors2 = "+"
End If end sub
The textbox called Honors2 returns nothing. Any help is greatly appreciated.
I have a form that I want to filter out certain records based on if a field has data in it or not. I tried using a macro and putting the field equals "IsNotNull", but that didn't work. I just asked me what "IsNotNull" is suppose to be. correct way to do this via macro?
I tried searching but was finding VBA with other filters being applied (which is not the case).
I have a textbox on a report that I wish to populate based on the value that is in another textbox/field on the report, and I thought DLookup was the way to go - however, I cannot seem to get it to work.
I have a table (ComplaintsResponses) that has two fields, both text
[ShortDescription] [ResponseText]
The text from [ShortDescription] is saved in a field on another table that contains all the other relevant information that is used in the report, and whilst this short description is mostly fine, I have one report where I need the data from the larger [ResponseText] field.
So I'm trying to populate a table based on selections I make within a form.
The form is based of a query that pulls a new product category that needs to be added to my first reference table for products.
The form shows all the new unique product codes, and there is a drop down box with product categories whose source is also the first reference table, so a new code would be:
'JBL - TRX - FVB - TRZ' And based on that new info, I would select from the drop down to select the corresponding category and click 'Add Record' button.
I'm building the event for the button and the code is as follows so far :
Private Sub Add_Record_Click() End Sub Private Sub cmbAdd_Record_Click() 'add data to table CurrentDb.Execute "INSERT INTO tblPVMTable(PVMJoinField, SummaryPVMCategory) " & _
[Code] ....
I keep getting errors with the main portion of code.
I have a Customers table and an Orders table. My Customers table is a bit different than the norm because I couldn't figure out any other way to do this.
My client's customers are either businesses (companies) with a contact person, or individual customers. So, in the Customers table, I have the following fields (there are others but do not apply to my problem):
Customer ID Company Contact Customer
So, if it is a company the data entry person would enter the company name and the full name (EX: Doe, John) in the contact field, but if it is an individual customer, then they would leave Company and Contact blank and enter just the Customer name (Ex: Doe, Jane).
So, in the Orders table, I have combo boxes for look ups for the fields Company and Customer.
That works okay, but I would really like for the Customer ID to post into a text box once the Company or Customer has been selected. In other words, the input person would enter the name, then it would show that Customer's ID #.
I am wanting to populate a control in a form based off of two different fields in one table. Is that possible?I have a table called tblEmployeeMaster and it has a LastName column and a FirstName column in which I need to have both first and last name show up in one box on my form?
I've got a Parent form (frmProspectDetails) with a subform linked (fsubProspectSkill).
This form is for users to enter general information on a prospect (names, position, height, weight, etc) on the parent form and skill levels on the subform.
Currently the subform is set so the user has to manually select the specific skill set for the prospects position, and then enter a value for each skill level(1-99).
I'm trying to get the subform to auto populate with a specific skill set based on the position selected in the parent form, so the user only needs to input the skill level without selecting each specific skill.
This data is then stored in a table (tblProspectSkill)
To add, I've created a form (frmPosition) that lists the specific skills set for each position.
I'm not sure how to get this subform (fsubProspectSkill) to auto populate with the specified skill set from frmPosition.
I have a table filled with company contacts and form with a combo box containing the contacts names.
When a contact is selected I want it to show their Telephone, Mobile and email address in text boxes below. But it only shows the telephone number and the other two fields stay blank.
what I'm doing wrong ?
I have this code assigned to the combobox:
Code: Private Sub MainContact_Change() Me.Text169 = Me.MainContact.Column(3) Me.Text167 = Me.MainContact.Column(2) Me.Text177 = Me.MainContact.Column(1) End Sub
And this is the row source:
Code: SELECT tbl_Contacts.Salutation & " " & tbl_Contacts.ContactForename & " " & tbl_Contacts.ContactSurname AS MainContact, tbl_Contacts.ContactTelephone, tbl_Contacts.ContactMobile, tbl_Contacts.ContactEmail FROM tbl_Contacts WHERE (((tbl_Contacts.ID_Company)=[tbl_CompanyBookings].[ID_Company]));
I'm trying to populate a form textbox which is unbound.
I have table with a list of peoples login names and a query filtering these names once a user logs in. If the GetUserName() matches one of the names in the table then user is authorised. this part seems to be working fine. User not on the GetUserName() list the filter says blank ie Not Authorized.
How to take this confirmed user name and place it into a textbox on a form?
Table name: [tblUserNames] with [IngEmpID] & [UserName]
Query Name: [qryUserNames] with a Criteria GetUserName()
I would like to create a combobox on a form in which a user has three selections: negative, positive, other.
If negative is chosen a textbox auto-populates with "none detected". If positive is chosen the text box populates with "positive" and If other is selected the text box populates with "unspecified".
I am looking to have a combobox on a unbound form to select a product code (this i can do). However I want a textbox to auto populate with the description as well - both in the same table tblproducts - product_id, pcode, pdesc....
Got a bit stuck in a database. I have a form based on a query. On the form I have 4 comboboxes.
The combo boxes filter eachother without a problem (based on custom select query)
Now I want after the fourth combobox value is selected, I want to populate a text field with a value from a different column from the master query (after the 4 selections only 1 value should be possible)
Master query contains 5 columns: - group - type - job - insurance - charge
combo1 selects group (and filters records) combo2 selects type (from remaining records and filters again) combo3 selects job (from remaining records and filters again) combo4 selects insurance (from remaining records and filters again)
Combo4 is based on following query: -column1 Insurance Total=Group by Show=yes -column2 Job Total=Where show=no Criteria [forms]![name].[combo]
This works great and the dropbox only shows 1 OF EACH DIFFERENT record
If I add a text box and want to see the "charge" value, that I thought I could use the ME.text-code. But in order to do this, I have to add the charge column into the query of Combo4.
If I do this, the dropbox for insurance gives me multiple values that are the same. Is there any way to make this work?
(MACROS ONLY)I am looking for a way to open a form in order to add a new record. The idea is that I open up the form with a MemberID and possibly the name already filled in on the relevant form. It is merely for ease of use regarding the user.
I have got as far as opening the the new entry form. I just need to pass the MemberID into the relevant field. If I use the wizard it is just finding a record of a pre-filled entry.
I am trying to populate a textbox from a field in a table based on clicking on a item in a listbox. User clicks a name from the Client table in the client field, and the date that is stored in the orderDate in the same row. I want the text11 textbox to show that date.
I'm working on a project that uses a barcode scanner. The user will scan a barcode which will choose an item from a combo box. The result of what it enters will populate a text box. I have that part working fine.
The next step is to get it to open a form based on the value in the textbox. The textbox will have about 7 different possible values and each one should open a different form.
The way this is supposed to work:
User approaches a machine and scans the barcode. He is presented with a form giving him options based on the type of equipment the machine is. A compressor for example would present him with a set of options for compressors (gauge readings, maintanence, etc).
I have an unbound form with two controls:
cboAssetNumber txtType
How to code this and which events to code it in. Users will be going from machine to machine and using the form over and over again so I need to somehow manage the clearing of the form to begin again with another barcode scan.
I saw another thread about a barcode scanner and one response was to program the scanner to send the barcode and then send an "Enter" press to move focus to the next control. I've looked through the documentation and haven't been able to find if that is possible. Right now it sends the number and that's it. It's a "Motion" Tablet.
In the past a Teacher would manually create a Form (Student Form) containing Student information, (Name, Gender, Birthdate, Homegroup) as well as additional issues on the student. This would all be saved into a table.
I would like to change this manual process of typing in individually to each text box, therefore, I have been able to run a report from a external program that obtains (Name, Gender, Birthdate, Homegroup). This saves as CSV and I am able to import into a separate table within the database. This works no problem.
What I have set-up is a form that contains a listbox this contains the Student name and Homegroup from the imported table contents. Again this works fine.
What i would like to do is when a student is selected from the listbox and dbl clicked on, how can i make information (Name, Gender, Birthdate, Homegroup) populate the textboxes in the Student form that the teacher previously used? could this be an update query where the imported table information will then go into the Student form? If so, how can I tell the dbl click of highlighted name is the data i want to populate?
I am new to access and have been staring at the same Run-time error for 3 days (pathetic I know). I cannot for the life of me figure out why it does not like my Dlookup. Esentially, I want and After Update event in my combo box to populate a Rich text textbox in my form. After reading DLookup is the easiest way to make this happen. Here is my code:
I have a form with a text box where the user enters a date and then clicks a button titled "Add." I've added an on-click event to the Add button that runs an append query that adds several records to a table [tblTracking]. I have a field in tblTracking called EndDate. I want the date that's entered into the text box by the user to be populated into all the new records added to the tblTracking when the append query is run. Currently, all fields in tblTracking are populated when the append query is run, except the EndDate field.
Is this possible? If so, how?
I've experimented with adding a separate on-click event that adds a record to a separate table containing only the date entered in the textbox and an auto-populated ID field. I thought there might be a way to utilize the ID field to pull the associated EndDate into the Tracking table, but I can't figure that out, either, since I don't know how to tell it to look at the date field in the last record of the table. That sounds unsafe anyway.
1. I have a switchboard. I want to click a button, that opens a form with a dropdown list, when I make my selection, it opens a subform in add mode, but the linked field in the subform isn't empty, but filled with the mainform's field value that I selected?
OR
2. Is there a way for me to open a form in add mode, add data to it, click the add button (I will add an add button) that allows me to add again, but this time a particular field is not empty, but filled with selected info from previous selection?
Say for instance, I have 2 fields (both combo box fields), I click add, made selections for both fields, I click add again, but this time one of the fields stays constant like it's already been selected. It's filled with what was selected from before.
basically am creating a booking system, i have a add a room form. my form should check whether i already have a room number in my table, which works when the form is filled in. however when my form is null, then i press add new room button, i get this error rather than " please fill your form in"
Error: runtime error '3075' syntax error (missing operator) in query expression 'Room Number ='.
room number is a number field, integer but has primary key. i cant keep autonumber, as my requirement is to add new room number, but the roomnumber has to be unique.
here is the dlookup;
If DLookup("RoomNumber", "tblRooms", "RoomNumber = " & Forms!RoomPackages!txtRoomNumber) > 0 Then MsgBox "This number already exists." Else
I currently have two froms, "add record" and "add record cont." The reason I have two seperate forms is because when clients create a new record information needs to be saved to two different tables and when creating one from with fields from both tables I ran into many problems. The two tables are named : tblMain, tblFileLoc Currently there is a textbox on both forms named "fileID" the FileID in the first form is from tblMain and is the primary key for that table, the FileID on the second form "Add Record Cont." is just a normal field. When clients enter in the new FileID in the first form "Add Record" and then move onto the next form "Add Record Cont." i need access to bring the entered FileID from the first form and Fill it in the FileID field in the second form. Currently I have tried making the control source for the textbox on the second form = the textbox on the first form but it brought up an error.
