Forms :: Populating Controls Based On Input In Others From Reverse
Aug 3, 2015
I'm using I have a secondary control being populated by an entry from another control. I was able to find the code I needed to do this using a combo box here in this forum.
me.txtDependent=me.cboPrimary.column(#)
(specifics changed to protect my company's paranoid view of privacy)
the code itself was showing up in the secondary control instead of any value. I found though that moving the code from the On Change event for the primary control to the On Current event for the form itself everything is working beautifully.
However, I have a different task now that I need to be able to accomplish with the same two tables but in the opposite direction. I suspect that I'm going to need to create a second set of controls and maybe even a second relationship or table to do this. To use a set of specifics that I think will get this point across, if I had a master table which includes a field for "City" and a secondary table, CityState, which contains both "City" and "State", and two controls, a combo box cboCityState to look up the specific City and a text box, txtState to display the State, putting the following code in the City combo box's On Change event populates a text box with the State when the specific City is selected, or putting it in the form's On Current event will be sure that State shows up in all the copies of a form when the form is used in a search and the City is not changed :
me.txtState=me.cboCityState.column(2)
What I need to do now is to set up a control which allows me to type in the State and have the results show all records that include that State.
I'm using this in a Filter by Form environment. I know the objections to this method and the benefits to creating a dedicated search form, but this method appears to be working well in all other ways for us for now. I have several situations within this form where I have one control showing up at the initial load of the form and at the beginning of the filtering process, allowing selection of multiple values from a long list of values in a list box, for instance, (using the On Filter event) and other controls showing up as a result of the filtering process, to display the selected criteria only, for instance (using the On Apply Filter event), so I'm aware of how to make this work if that's required. I'm thinking I may need to create a second control, something like txtStateInput, to accept the State search criteria and another, something like txtCityResults, to show the cities that are part of the resultant records.
What's the best way to lock down form controls after the user has entered data into them? I will have a button that reads "Save Record" that will make it so the records cannot be accidentally (or intentionally) changed after the button is clicked.
I have a form in which I want to capture today's date when another field on that form is changed from active to Closed. In excel I would write an IF statement but can't get my head round what I would do in Access to achieve the same result. basically it's if (field name 'status')=(criteria 'closed') then populate field (date closed with 'today's date').
I have a text box that displays a name of a law from one table, based on that law name I want to populate a combo box with different options on how to comply with that law that come from a different table. The compliance options I need to pull in are different for each law. Finally I would like to have the selected option saved in the table the laws are coming from.
I have tried using a rowsource query [Form]![form1]![Law] for the combo box of law options but keep getting errors.
I have a form with several controls. Among them are 3 in particular:
Vendor Price - Unit cost with no tax Unit Price - Vendor Price w/tax Old Price
What I am trying to accomplish is a way to track what previous costs were by having the Old Cost control populate with the Unit Price controls value when there is a change to either VP or UP either due to new cost or new tax rates.I found a bit of code online but was not able to get it to work for me...probably because I haven't a clue of how to structure it for my needs.
Table has Checkbox column BusinessDate column (mm/dd/yyyy format) OrderTotal column (in dollars) There are others but these are the relevant ones
In the header of the form I have a calculated control box with the following control:
=Sum(Abs(nz([Checkbox],0))*nz([OrderTotal],0)),0)
Which works just fine. The user is presented with a list of all the orders from this table in the form. They check the checkboxes and the control in the header shows the total of the records checked. I need to make 7 of these calculated controls, one for each day of the week. Is this possible? This way the user can see the order totals for each day of the week they have selected.
I tried: =IIf(Weekday([BusinessDate])=2,Sum(Abs(nz([Pull],0))*nz([OrderTotal],0)),0)
but it still sums up the whole week as the expression holds true.I do not know VB, and I'm sure there is a really neat and easy way to do it in there. I just don't know how.
I am using Access 2010. I wish to show or hide controls based on the value in the combobox. The combobox is bound with the data type Yes/No. If Yes, controls should be visible and if no, they are to be invisible. The database is a linked one. This selection should update all the users' forms.
The main issue I'm having is trying to populate a text box based on a combo box selection. I've found threads on that - the twist that is throwing me for a loop is that I'm dealing with two different forms.
I have a main/welcome form with two combo boxes on it. Based on the user's selections in these two combo boxes, two different forms are opened for data entry. For instance, box 1 has A, B, C and box 2 has x, y, z. If a user chooses B and z, then form B and form z are opened. What I want is for a text box to be populated on one of the opened forms, not the same (main/welcome) form. In other words, when B and z are chosen, I would like there to be a textbox autofilled with "z" on form z.
I have tab control form with (5) tabs. For this discussion - Tabs 1 through 5. For a blank (new) form sheet tabs 4 & 5 need to be hidden. Based on what is selected via the drop down box (on tab 1) then tabs 4 & 5 may remain hidden or needed to be un-hidden. Example: [DropDown1]
I think one I figure this out then I can use the 'OnCurrent' event to check the drop down selection as a user selects the a record or scrolls through records.
I have frmIncident that has a 2-column combo box (cmbIncidentType). Column (0) is IncidentType, Column (1) is YES/NO. This combo box feeds from a Query and currently has about 15 "types" of which 4 have a "Yes" tied to them, then rest "No".There are situated on a TabControl (tabIncident) with 5 sheet tabs. If the Incident Type selected in the Combo Box has a corresponding "Yes" in Column (1) then all 5 sheet tabs need to be visible. If it is "No", then only three of the five are visible. Here it he current code I am using for the AfterUpdate event on the combo box:
Private Sub cmbIncidentType1_AfterUpdate() If Me.cmbIncidentType1.Column(1) = "Yes" Then pgEmerIncidentRpt.visible = True pgNarrClose.visible = True Else
[code]...
When I open the form is will set the proper sheet tabs that need to be visible, however once I cycle to the next record, or select a different Incident Type, even one with a "YES' in column (1), it will only show the (3) sheet tabs. I can never get it to show all 5.
In the code, the only (2) sheet tabs that need to visible = true or visible = false are shown, starting with "pg".
In ContactIDForm it contain 1 textbox name 'TextBox' with Button Name 'Btn'
In ContactIDForm there is only 1 Text Box ContactIDTextBox and 1 Button. User Enters ID in TextBox and On Button Click Event it should check data from TextBox in Table name (ContactDetailTable) in field ContactID and if there is record matching, ContactInfoForm should Open else NewContactForm should open with ContactIDTextBox value in it.
I'm creating a database for work, and one of my forms currently has 8 subforms on it. For each individual account there can be one, none, or many of any combination of these subforms that will have information on them. I need the form to be able to show all of them, as someone else will be inputting all the information when the database is complete, but to make it easier I have set it up with checkboxes so that when a checkbox is checked, a subform shows, if not checked it doesn't show. I have very limited skills with VBA, so that in itself was an accomplishment for me.
My questions is: is there anyway in access to do it so that if a subform doesn't show, all the ones beneath it that do show will get bumped up so that it is easier to read/input data?
I have attached my DB and the appropriate form is "ICinfoT."
- text box for user to enter EMPID, txtEMPID - LASTNAME
I would like to create a button to initiate a query to do the following:
- once the user enters a EMPID in the form, it will search in the TABLE under the EMPID field... - if the user enters an EMPID that is in the TABLE...display "Y" - if the user enters an EMPID that is NOT in the table...display "N" - a error message box needs to pop up if "Y" to alert the user that "the EMPID already exists and that duplicate entries are not allowed"
One of my main questions is how do I run a query based on the users input and search a table? would the following work in the query?
I am a novice to access. I am building a database in an effort to learn in the process. I wished to enquire about the possible issues that could be with defining the relationships that i have created in the project. (attached img).
I cannot seem to define a form based on these relationships to input the data.
Can you update a text box on a form based on input of a date control? Here is what I have. I have several date controls on my form, and I want to update a status textbox based on which of these date boxes is filled out, but I need the status to be filled into the table as well. Do I update the field on the table, and then requery the text box? Is there some other method for accomplishing this?
I have a form that displays fields from two tables. I have set the properties of Allow Edit, Allow Additions, Allow Update, Data Entry to NO. However I want to allow users to be able to add new, edit/update and delete records from the form by clicking on respective command buttons.
the problem is that the code that I am using is giving me errors that says that I "You cannot go to the specified field" I need help on proper VB code to use that will allow me to enable input and update on the records in the table.
I need to be able to query the service dates for the bill. So I can query 1509 for the .billYYMM and .readdate and it will give me the TO Date. How do I in the same query tell the query to subtract 1 from the BillYYMM that I just entered and give me the read date for that field in that query? So Query 1 MBRHISTDETL.BILLMOYR and in the criteria box use [Enter the Bill Month Year YYMM you want to search for] will allow me to run the query at any time for any bill month year that I enter. So another field in that query is MBRHISTDETL.READDATE. So to get the FROM date and the TO date i need the following MRBHISTDETL.BILLMOYR (whatever I enter as input) and MBRHISTDETL.READDATE that corresponds and then I need [MRBHISTDETL.BILLMOYR]-1 and MBRHISTDETL.READDATE. The first gives me the TO date and the 2nd gives me the FROM date?
I need help to populate a certain selection from a drop-down (combo box).........OK I have a field named REP ID/REP NAME....(Rep stands for contractor)....Each Rep is assigned an ID and the first two numbers in the rep ID correspond to the territory in which they sell products...So for example 5830 John,Smith the 58 would be Northern California....Now what I want to create is a field named TEAM which would consist of Team A through Team D....Every Team is associated with different territory numbers to lets say I click 5830 John, Smith I would want Team A to automatically be populated in the TEAM field....Someone please helpp....And I hope I described it correctly
I can't quite get my code right for populating one combo box based on the selection in another. I didn't create this Access database but I've been asked to add in a second combo box that is based on the selection of the first combo box.
My first combo box is for Rohe (the location of the Maori tribe) and the second is Iwi (the tribe name). So my first combo box (Rohe) has Dvic_ROHE written in the control source and its row source code is:
SELECT tblLookUpValues.DatabaseFieldValue FROM tblLookUpValues INNER JOIN tblFormQuestionLookUp ON tblLookUpValues.LookUpID = tblFormQuestionLookUp.LookUpID WHERE (((tblFormQuestionLookUp.FormID)=2) AND ((tblFormQuestionLookUp.QuestionNumber)=75)) ORDER BY tblLookUpValues.DisplayOrder;
The combo box for Rohe (tribe location) is populated by a table named tblLookUpValues. The second combo box for Iwi (tribe) has Dvic_Iwi in the control source. I created a table named tbl_Rohe_Iwi_lookup that contains ROHE (a list of tribe locations) and IWI (the tribes). There are 12 tribal locations and another 10-14 tribes in each location. The form that the Rohe and Iwi combo boxes are located on is called frmDeceased. This is the code that I attempted to write so that the second combo box (Iwi) is populated with only the tribes that are in the Rohe (location) that was selected from the Rohe combo box. But when I run the query it comes back with no results.
SELECT distinct tbl_Rohe_Iwi_lookup.Rohe, tbl_Rohe_Iwi_lookup.Iwi FROM tbl_Rohe_Iwi_lookup WHERE (((tbl_Rohe_Iwi_lookup.Rohe)=[forms]![frmDeceased]![Dvic_Rohe])) UNION select distinct null, null FROM tbl_Rohe_Iwi_lookup ORDER BY tbl_Rohe_Iwi_lookup.Iwi;
What i am try to do is have specific text boxes or items appear on the form depending on the combobox item you have chosen.
For Example
Combobox
CAR CAKE RECEIPE CLOTHING
if car is chosen 2 text boxes appear example car manufacturer, Car name. If Cake recipe is chosen a larger text box appears, if Clothing is chosen another combo box appears and gives you more options.
Hi all, I have a query which populates a form called EditPatientFrm, which asks the user to enter the patient UniqueID in order to pull up the record they want to edit from the TblPatient. However, I want the user to now be able to input just one of three criteria in order to pull up the record to be edited:
UniqueID ChartNumber PatientLastName and PatientFirstName (two fields)
since they may not have the UniqueID readily available to them.
Can anyone show me how to do this? I have tried to find answer to this one under queries and forms- no avail. Sure it's a simple thing...
I have a table of raw materials that have two fields, their stock code and longer description.
I have another table that is tracking the usage of these materials. I want both the stock code and longer description to be recorded in the usage table.
I want the "Description" field in the usage table form to auto populate when the user selects the corresponding stockcode from a combobox.
I have a form with a Listbox which lists Customers and a variety of customer information
I also have a table on the form that lists the donations that customers have made.
How can I populate the Table based on the customer that is selected in the Listbox?
There is an ID field that links Customers with Donations
I'm guessing I need some code in the ListBox_CLick() event that triggers the table to query or to Load with a query based on the ListBox.Column(0) which contains the ID?
I have an infopath form, which people in my company can fill out to order parts. The form is linked to an Access database. The primary keys for the database are the Order Number and the Line Number (where the specific part info is in the system). The form also takes info about who entered the order, when they entered it, etc.
My problem is that while the form will be used for only one order, it may be used to order multiple parts. So the infopath form has a repeating section with a table where they can enter multiple line numbers and part names, etc.If I use the form to enter just one part, everything works great. But when I use the repeating section to add multiple parts, the information specific to the repeating section is added to the database but the rest of the information (who entered, when the entered, etc) isn't.
My intial idea was that since the first part is entered correctly and the subsequent parts are missing some information which is already in another line in the database. Maybe if there was a way to pull the information from another line into the lines with missing info within access would solve my problem. So basically automatically populating the rows with matching Order Numbers with the information that is missing.
