Forms :: Popup Image On Rollover On Button Or Label
Feb 24, 2015I was wondering if there is any way i can popup image on rollover on button or label. if yes, how to do it.
View Replies
ADVERTISEMENT
Rollover Buttons In Access Forms
Sep 1, 2005Quick question - is it possible to put rollover buttons on Access forms? I have two images, one Button Up and one Button Over and would like to support the end-user in making choices.
Regards
Mike
Forms :: Button To Link To Image
Apr 10, 2013I'd like to put a button in a form that when clicked opens an image on the computer, the location of which is already specified in a field called RefImage.
When I change the hyperlink property I can only have the button open a folder or internet address rather than a unique image for each individual record.
If I use the code builder for the event on click and try to write Application.FollowHyperlink RefImage it gives me error message 490 that it Cannot Open the Specified File, but this is probably because I don't know how to write VBA.
Any simple way to make a button on a form open an image in IE or windows image viewer which has a path specified within a field of the form? Perhaps someway to use the Application.FollowHyperlink, clearly I am doing something wrong.
Forms :: Changing Auto-date Rollover Time?
Mar 31, 2014I have a date/time field on a form that has the default set to "=now()" which puts in the system date and time. I need to change it so that the date changes to the next day any time after 11:00 PM (instead of midnight). This is because our third shift starts their day at 11:00. If they start entering data right away, alot of their work shows up on the wrong (to them anyway) workday date. I'm struggling with the expression builder to get this to work.
One way is changing the time to be an hour ahead but that will affect the entire day when I just want to change the date for one hour per day.
Reports :: PNG Image On A Label Report
Apr 7, 2014I have a report reading directly from a table. Table has a text field "txtOldState" where the field data a 10 digit number.
Also have a directory with .png files named with same 10 digit number. The txt field is on the report - I need to print the associated .png file on the report along with the 10 digit "txtOldState" field. I'm failing at pulling a png from the folder to print on report.
Forms :: Using Command Button To Select Image And Show It In Access Form One After One?
Feb 26, 2015in the attached form i can select multiple image but my next and back button does not work ,also i want the path to the file shown above.to copy the name from there and paste it in the table,to write remarks.
View 2 Replies View RelatedForms :: Button In Popup Form - Set Focus To Another Form?
Jan 28, 2015How can I make a button in a pop-up form to send enter key to a text box in another form? Do I need to set focus to the other form first? And how?
View 1 Replies View RelatedDifference Between A Command Button And A 'label' Button
Aug 12, 2005Hi, I have got a small problem and maybe someone could advise me.
I am creating a customised command button from a label button. The new button works fine but I can't apply the 'requery' function to it, if i do an error occures and i am being prompt to save the data first???? :confused: :
Private Sub Labelsearch_Click()
Me!itemquery.Requery
End Sub
Private Sub Labelsearch_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.SpecialEffect = 2
Me.Labelsearch.BackColor = 255
Me.Labelsearch.ForeColor = 10092543
Me.Labelsearch.FontItalic = True
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.ForeColor = 255
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
'Come back to initial state when button release'
Me.Labelsearch.SpecialEffect = 1
Me.Labelsearch.BackColor = 16373685
Me.Labelsearch.ForeColor = 8388608
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End
If I create a command button with the wizard and assign the code :
me!itemquery.Requeryto the on_click event my form is working fine.
Why is his code is not working if I assign it to a label? :o
Command Button To Perform Popup Action
Aug 29, 2005Hello,
I am having trouble making a command button do what I want. I have a subform within my form, but I only want it to appear when I click the button. I tried using the wizard but there is no option to open subform, only open form. Any thoughts would be greatly appreciated!
Label In Front Of Button
May 25, 2006I have a button on a form that is hidden, the button has a label over it, both are normally hidden.
When the user presses another button on the form I need these to appear but however I do it, the label appears behing the button.
Ive sent the button to the back and brought the label to the front, both by default are not visable
when the user clicks the button I run the following psuedo code
me.button.visible = true
me.buttonlabel.visible = true
any ideas?
regards
Andy
General :: Variable Button Label
Oct 28, 2014I have a printed form that pulls some of its data from a table.What i need is that printed form to have a variable that two area in the form can change based on who is printing the form.I have a table that has all the users data in it. the current form pulls that information from the label and places it into the for. easy enough so far right.
for example. But i need this printed form to be able to be dynamic. So for instance Tom inst sitting that the computer wanting to print the form and so on for four different users who will print the form.So the button that allows the print either needs a way to have a selection or i need four different button. So the second part of this Mark Twain quits his job and Johnny takes his place. easy enough to change the data in the table that my form is pulling the data from but the button label needs to change to that the button.
Browse Button To Image
Jul 3, 2005i would like to create an browse button on my form so i can find the pictures i would like and then to been shown on the picture field on my form. i tried the northwood code from help but i could manage nothing woth it. do you have any idea to help ,me please??
View 11 Replies View RelatedModules & VBA :: Label As Button Does Not Finalize Textboxes
Apr 24, 2014In Access 2007, I'm using labels as buttons because they can be made pretty. Since labels can't have focus, the focus is not shifted from whatever textbox users are in on button press. The value in that textbox is not considered updated when the macro runs, and things get messy from there.
I had been using a setfocus between two textboxes to work around this, but that seems like a copout. I now have a simple form with just a textbox and a button, so this seems like a good time to learn the right way to do this.
Command Button Open Image
Jan 29, 2005Is it possible to have a cmdButton open a pre saved image from your hard drive. The images are saved with the same name as the Account Number. (ex: AcctNum -- TA123409 Image -- TA123409.bmp) I want the cmdButton to open the image filtered or based on the Account Number. If so, could someone show me a sample OnClick code. Thanks
View 7 Replies View RelatedImage Over Button Proportioned Nicely?
Jul 22, 2014How to stretch a picture so you can see it nicely proportioned over a button? I would like to use images over buttons but its always messed up looking.
View 6 Replies View RelatedGeneral :: Using A Toggle Button To Change A Label Colour?
Feb 27, 2014Is it possible to use a toggle button to change the colour of a label?
I assume the code should be something like this:
Code:
If Me.ToggleButton = 1 Then
Label.BackColor = RGB(0, 255, 0)
ElseIf Me.ToggleButton = 0 Then
Label.BackColor = RGB(255, 255, 255)
End If
But I've tried it in the "On Click" sections and it doesn't work.
Modules & VBA :: Label As Button Doesn't Change Focus
Jan 20, 2014I'm using a label as a button so it looks nicer, but if I press it without officially exiting the last text field I was in, then that text field doesn't update, so the vba believes it's blank or whatever it was.
I could manually setfocus to a couple different fields or have a teeny field thats hard to see to set focus to, but these both seem roundabout.
Custom Button Image Transparency Problem
Dec 5, 2006Hello,
I made some custom icons for use with command buttons, and I made them ICO
files with transparency.
However, after I assigned them to my buttons, there's a light grey
background colour - which doesn't look all that great.
Is there a way to import images with their transparency intact? There must
be, since Access' built-in buttons are transparent.
Do I need to use a different image format? Or are there other tweaks to make
this work?
Thank you.
Button / Image Or Text Box To Access Hyperlink Field
Oct 15, 2013I have a field in a Table (tblMainFile) named "File Location" which contains a hyperlink for each of the files.I have a continuous form (from a query) which displays information from the tblMainFile table.the form shows a text box (with the hyperlink) which is clickable to take them to the link location.I would like to have a button which says (GET FILE) or a different text box which simply says "Get File" as opposed to the entire hyperlink.
View 6 Replies View RelatedCode Triggered From Label On Click Behaves Differently From Command Button On Click
Nov 7, 2006Often I use Labels as buttons due to the fact I can colour them the way I want, and use the on click event to trigger code.
The code below however works for a command button, but not a label button.
DoCmd.OpenForm "frmdatetime"
Do While Forms!frmdatetime!OKFlag.Caption = "False"
DoEvents
Loop
When this code is run by clicking on a command button, it works fine.
If run by clicking on a label, frmdatetime opens, but the mouse will not work on either of the 2 open forms unless you go down to the windows task bar, jump onto another window, and back onto frmdatetime.
If I remove the loop with the DoEvents in it, then the problem does not occur.
Can anyone enlighten me as to why this behaviour occurs.
Thanks
Richard
Popup Forms
Feb 6, 2008Hi everyone,
I have a main form showing a number if information for one project. Within this form I have yes/no buttons that when clicked, open a popup form where you can add additional data. The problem I'm having is that when opened, the record # for the pop form does not match the record # for the main form.
Example: Let's say I'm in the main form and showing record #5. When I click the yes/no button to add extra info, the popup form opens but it shows record #1, not #5.
Any ideas how to tell the popup form to link with the corresponding record would be very much appreaciated.
Thanks
Forms :: How To Get Rid Of Parameter Popup
Sep 9, 2013All; using ms access 2010. In the query I use for a report; I put a parameter so the user can filter a date. It works fine but now when I go to open a form that has a subform relating to the report; users get the popup for input also. This doesn't stop the form from opening but it is annoying. There is a subform on this main form relating to the report, but the subform has a table not query for the recordsource like the report. None of the queries related to the main form that's asking for the parameter values have the parameter inthe queries. How to get rid of the parameter popup?
View 8 Replies View RelatedHow To Change The Label Caption Of A Variable Label Name?
Aug 4, 2006I have n horizontal labels named Label_1 to Label_n. I'd like to assign values to the label captions by using a loop.
Something like:
For i = 1 To n
Set Label_i.Caption = i
End
However, this doesn't work. Message "Object required".
Any suggestions?
Forms :: Popup List Instead Of Combo Box?
Aug 7, 2014Is there a way to make a popup list open on click of a button (cmdAssign) and the user chooses/selects something from the list, then the popup closes and the textbox (txtAssignmentNo) is filled with the choice?
View 3 Replies View RelatedForms :: How To Make A Popup Go Away Automatically
Jan 20, 2015I had used a form to come up as a popup, and on that popup, the person can chose a report to go to (button). Is there a way that once they chose the button they want, to make the popup to go away automatically?
View 11 Replies View RelatedModules & VBA :: Changing Image Path - Set Picture Property Of Image
Dec 4, 2014I have a form that I would like to update a picture on using VBA. The source of the picture path is in part a query that is not bound to the form. So far I have the following code that is pretty much working, but with a couple flaws.
Code:
Private Sub Form_Current()
LoadDefaultPicture
End Sub
Sub LoadDefaultPicture()
Dim db As DAO.Database
[Code] ....
This is working. However, when I change the record the picture flashes the current picture once and then loads the new picture. It is like it reloads the current picture then loads the new one. I'm hoping there is a way to get rid of the flash.
Also, the code fails here:
strDefaultPictureName = rs.Fields("AttachmentName")
When the query does not return a record. I can definitely fix this by adding an if statement to check for a record, but I'm kind of perplexed at why it is failing at that line. I would expect it to assign an empty string to that variable name and then fail on the next command where I try and set the ".Picture" property of the image.