Is it possible to capture a form's filter? In Access 2013, I have a form (from a template database) listing contact information. I can set filters by clicking on the column headers and selecting which records I want displayed. There is also a button to run a mail merge with Word. I want the merge to only include those records displayed on the form at the time it's run.
View RepliesNot sure whether this really belongs in the Forms, or VBA or forum, picked Forms because I think it stems from that, despite probably involving VBA in the solution...
I'm getting used to using filter by form and find it quite useful for those off-the-cuff queries, however, it is possible to 'capture' the records so that the results of the filtering can be passed to a readymade report (so that they can be printed out in a more presentable manner than the table view)?
(To what would the Record Source of the report be set?)
Tim
I need to know when:
* a new record has been created
* data on a record has been changed
Does the On Dirty event capture this, or can I just use the forms On Change event?
I have two forms that have a unique field (SSN).As I'm working in one form, I want to be able to pull up the other form (which isn't a problem). On the second form pulled up, I want the record to match the first form (SSN) - this is the problem.
I believe SetFocus is what I need to use but I don't know how to capture the SSN from the first form to use as the focus for the second form.
I have placed a filter button on a form as a filter and written the following on-click event procedure:
DoCmd.SetWarnings False
DoCmd.RunCommand acCmdApplyFilterSort
Me.Filter = "ACCOUNT_DO_NOT_EMAIL = 'HS'"
Me.FilterOn = True
When I click the filter button I get a blank message box titled 'Microsoft Access" and an OK button, when closed the filter works perfectly.I have checked this procedure in other forms and it works without showing the blank message box.The only difference with this form is that its control source is a union query.
I would like to put a text box (user) and checkbox (check100) on a form, that when the checkbox is not checked the value in Gender switches. In an AfterUpdate I would use a code to capture the user login.
Code:
Private Sub Check100_AfterUpdate()
Me.User = Environ("UserName")
If Me.check100 = 0 AND Me.Gender.Value = "Male" THEN
Me.Gender.Value = "Female"
ElseIf Me.check100 = 0 AND Me.Gender.Value = "Female" Then
Me.Gender.Value = "male"
End If
End Sub
What is the best way to capture the users that modify the records in the database?
Let us start from User Log-in Form After log-in, Main Form will open The main form has various menu (example Add Customer) Once I open the "Add Customer Form", I want to record the username in the Createdby/Editedby Field automatically.
I have several data entry forms in my DB. What I would like to do is capture the windows user name of the people adding records and changing records. How do I go about doing that? I was think of an on change event to a given field that would then pull the username and insert it in another field/object.
Lets say the an on change of me.cmbModel update txtUserName.
:) Hi Guys,
I have a small problem, hope you can help me out. I have created a a form in Access for data entry. But I would like the form to capture the data and time and the user who's entering the data into the form.
How do I do that. Been trying to figure it out:rolleyes: . Hope you can help. Attached is the screenshot of the form I created. Thanks a bunch
http://img21.imageshack.us/img21/5612/screenshot4ic.th.jpg (http://img21.imageshack.us/my.php?image=screenshot4ic.jpg)
http://img21.imageshack.us/my.php?image=screenshot4ic.jpg
Hello everyone,
Simply put, I want to create a form to which I can enter a raw SQL statement (such as: SELECT * FROM contacts without having to create a new Access query.
The way i have tried to do this is by creating a form which uses an onclick function to pass the string variable (the query statement) to a sencond form and have the second form run the statement. I can pass the variable ok but I cant figure out how to the use the variable string in the second form to execute as the "Record Source" of the form.
Any ideas?
Thanks,
Curveo
I have a form where there are many users to enter or update data. I need to capture the username who created a record , then , on form load , I want system to check for username if it is same as the creator of a record , then allow update , otherwise don’t allow update , but allow only adding new records. How can I do this
View 3 Replies View RelatedWhen I'm applying a sort and filter in a form, Access is updating the Filter and Order By properties of the form, so that it is possible to re-use in conjunction with Filter on Load and Order By on Load properties. However, a consequence of this is that when the form is closed, it prompts the user whether they want to save the design of the form. I want to circumvent this as I don't want to re-use the sort and filter and I don't want to be prompted to save the design of the form.
Although I can circumvent this by closing the form using a method that doesn't prompt for saving, the additional complication here is that the form in question is in the Navigation subform of a Navigation Control. Hence when I click on a another Navigation button, it (not me) closes my current form and hence prompts me whether I want to save the design of the form (if I have been sorting and/or filtering). I can't see how to circumvent this and the prompting is resulting in unacceptable usability.
I can understand with placing a filter on a form.I have a table that needs updating. I created a form based on the table, but would like to only see the records that need updating, instead of the entire table.
I have no SQL knowlegde. Is there some simple answer? I would like to filter on one field for the word "NO" ie seeing only the records which contain NO in that field.
On a form I have a:
control called "FilterListBox"
list box called "lstCustomer"
option Box called "optCustomerType"
When the user selects an option in the option box, "FilterListBox" is updated to either "1", "2" or "1 or 2"..One of the fields in the query for "lstCustomer" is "CustomerType" and its criteria is set as follows:
[Forms]![frmPrintHowCustomersPaidInvoice]![FilterListBox]
if "FilterListBox" = 1 the query for "lstCustomer" returns the correct records
if "FilterListBox" = 2 the query for "lstCustomer" returns the correct records
But if "FilterListBox" = 1 or 2, no records are returned.
I have a form (Suppliers) with a button that opens another form (Product List).
At the moment the form (Product List) is set as a pop-up form and when opened lists all products.
I want to filter the pop-up form to only display products for the current supplier displayed in the Supplier Form.
I have tried the following below without success - I have varied this but the filter does not apply ...
Private Sub Form_Load()
DoCmd.OpenForm "Product List", acNormal, , "SupplierID = " & SupplierID
End Sub
I have a button that opens a second form and filters that form based on a text box on the first form(which remains open). the problem is that it does not filter the second form unless the second form is already loaded for some reason.
For example if i click on the button it opens the form Unfiltered then i go back to the previous form without closing the first form, click the button again and it is then filtered .
I attached the screen shot of the macro for the button and there are no other events on the second form.
I have a form that has two different option button frames and 1 text box that I would like my users to be able to use to search/filter for specific records. I chose a form because a table does not work as a user-friendly interface for the data that is being stored. The first option button frame allows the user to filter by Month and is named [FilterDate].The second option button frame allows the user to filter by incomplete and complete records and is named [FilterOption].
The text box is used as a search box and is named [txtsearch].I am able to successfully create macros to apply filters for each of the above options; however, each time one of the options is updated, it removes the previous filter. What I need is creating a macro (preferrably) or vba code (if macro is not possible) so that my users can first pick a month (as this will always be the first thing they do when opening the form), then pick complete or incomplete records within that month if desired. The search box then would only filter records that meet the first two criteria (month and complete/ incomplete).
I have developed an accounting database which includes, among others, tables for Transactions and Creditors. I want to query the data for a particular time period to find out how much I have paid to each creditor. At the moment I can do this by having a Main Form based on Creditors, and a subform based on Transactions that contains a filter to display only those records that fit into the selected time period.
Now, there are some creditors to whom I have paid nothing during that particular period, so the subform shows no records. That's fine, but as I have several hundred creditors, it's tedious to pan through each creditor to see if I have paid anything.
What I want is for the subform to display records from ONLY those creditors to whom I have paid something. I can view these records with a select query by using the GROUP BY function. However it seems that a form's filter property will not accept a WHERE clause that includes a GROUP BY clause.
How I can program this in VBA, i.e. to mimic a select query's GROUP BY function for use as a form filter?
Been trying to use wildcards in fields while Filter By Form instanced in Access 2007.
LIKE, BETWEEN, IN or */% not available?
The form is based on a query. I am guessing this is why the drop downs only show IS NULL or IS NOT NULL as choices instead of the entire unique list existing in the underlying table/query.
I have a form with a bottom that has a macro that uses applyfilter to filter the current form based on what is within a textbox located on the form.
I used the macobuilder and have my where condition as
[num] Like "*" & [Forms]![frm_Main]![Text181] & "*" Or [name] Like "*" & [Forms]![frm_Main]![Text181] & "*"
This works when I open the form by itself but when I try adding the form to a navigation form I get prompted to put in "num" and "[Forms]![frm_Main]![Text181] " etc. when I click the bottom.
I want to open a filter form with mulitple conditions.one of them is a date condition.
I'm using access 2013 and the code below:
Code:
DoCmd.OpenForm "Edit_Mission", acNormal, , "[Report_Date]= " & Me.Date & " And [Supporter_Name]='" & Me.Supporter & "'"
it's opens the form but with no data. I also tried the # and it's still didn't work.
I have a continuous Form named frmBirthdays that lists People with a [DateOfBirth] field.
In the Form Header I have 2 Unbound Combo Boxes 1- cboMonthFilter which list the 12 Months of the year in Text NOT Number and 2- CboAgeFilter that has a list of Ages 0 -30 (which is all i require) and a Clear Filter Command Button.
I would like to be able to filter the people list by cboMonthFilter for anyone that has a Birthday in any given month.
OR
I would also like to filter the people in the list by their age.
But never both at the same time.
All using 2010. I need to filter a subform from the main form.
Code:
sfrmMedCInfo.Form.Filter = "[SSNum]= '" & cboSSN & "'"
sfrmMedCInfo.Form.FilterOn = True
It's throwing an error: Variable not defined pointing to sfmMedCInfo. why do I need to declare the subform and how?
I have a reservation form and I want to tick a checkbox that will filter the form based on what is in the "Reservation Status" combo box.When the checkbox is ticked, the code would remove all records that have "Complete" as a status in the "Reservation Status" combo box. The non-working code that I currently have is:
Code:
Private Sub chkHideComplete_AfterUpdate()
On Error Resume Next
If Me.chkHideComplete = True Then
Me.filter = "[ReservationStatus] = 1"
Me.FilterOn = True
[code]....
combo boxes and continuous forms.I have a continuous form (works great), with two combo boxes that navigate (rather than limit/ filter the list) to the desired selection.One for suburb and one for postcode.
I have expanded the select criteria for the suburb to include postcode as some suburb names are used in more than one state. (I do not want to have to select a state, then suburb).I changed the column count to see the postcode next to the suburb, however when the selection is made only the first instance is selected.
Example.
Epping 2121
Epping 3076
If I chose Epping 3076, Epping 2121 is selected and the continuous form navigates to that suburb (rather than the one with 3076).Can I change this so that I can still search by postcode, or search by suburb and have the form navigate to the corrected suburb postcode combination?
I have a database with a filter on the form which users can apply I know at the bottom of the form it highlights it as filtered but I want something a bit more prominent displayed on the form when a filter is active.
View 5 Replies View Related