Can you have a hidden field in a form? Trying to set up an order process system where I need to take a wholesale price of an item then mark it up (behind the scenes) and display only the customer price. How can I accomplish this.
View RepliesI have a split form design. I want to hide a field which I have already set a default value for. But when I make it invisible, the default value is not being recorded.
View 1 Replies View RelatedHow can I hide and display a field on a form depending on what choice I make from another combo box?
View 2 Replies View Relatedhow to hide all form controls at once like if i have many text box and labels how to make a loop to hide it all at once
View 1 Replies View RelatedI am trying to hide certain fields on a form based on the value in another field (if yes or no). I used the change event to enable/disable the fields in question. however, this doesn't work. This is the code below...
Private Sub Combo314_Change()
If Me.Combo314 = "Yes" Or Me.Combo314 = "No" Then
Me.Reason_Label.Visible = False
Me.Combo316.Enabled = False
Me.Label946.Visible = False
Me.Label77.Visible = False
Me.care_not_qualified_date.Enabled = False
[code]....
I have created a form with 3 subforms on. i was just wondering is it possible to display/ hide these subforms based on a Yes/No field in the form. as the subforms would only be valid if the field is ticked as yes.
View 14 Replies View RelatedI am pretty new to VBA and I am having the same problem of hiding and un-hiding columns on a datasheet of a split form. I am building a system that will be used in front of customer and therefore wish to hide columns that contain cost sensitive data. The same forms need to be able to show the Sales Rep the hidden columns simply by ticking a box. Basically a toggle on and off of hidden columns.
I have been playing around with the code below (which i found in another forum) to hide the Field called COO when I click the tick box called chkHIdeFields check box. This works on a Single form but not on a datasheet of a split form.
Private Sub chkHideFields_Click()
' Note: vbTrue = -1
If Me.chkHideFields = vbTrue Then
Me.COO.Visible = True
Else: Me.COO.Visible = False
End If
End Sub
I have been able to hide the column of my split form by using the ColumnHidden property of the On Load event just as a proof of concept that the ColumnHidden property actually works to hide a column, which it does. This is the code that im using to hide the column called COO.
Me.COO.ColumnHidden = True
However if I then set it to = False and then close and open the form, it doesn't unhide the column. the only way I can unhide the column is to do it from the Form view via the un-hide dialogue pop up box.
I have two issues here, the first one is getting the form to recognize when to hide and when to show the column of the datasheet on the split form and the second is to get the code to for the check box method.
Lastly once I get it working for 1 field I need to be able to define a list of 7 or 8 other fields all at the same time.
I've searched and can only find information setting the visible property when selections are made on an open form--I want to set the visible property when the form is opened depending on which avenue the user chooses from the navigation form.
I have a navigation form (Form A) and a second form with a subform (Form B). The user will choose from a combobox, either an existing record or a new record on Form A. On Form A there are two buttons, one that will take the user to the correct record on Form B for editing and one that will open to a new record on Form B. Once Form B is open, all controls will be blank (if a new record is chosen) or with certain controls prepopulated if an existing record is chosen.
What I want to do is to hide controls on the main form (not the subform) of Form B if the user chooses an existing record. Form A's buttons work correctly to open Form B right now. I want to be able to hide prepopulated controls on Form B if the user chooses an existing record from Form A.
Here's the code I'm using to open Form B to an existing record. I'd like to set the visible property here if at all possible.
NOTE: "Form A" and "Form B" are not the actual names of my forms--it's just easier for illustration purposes here in my question.
Private Sub cmdAddLogEntry_Click()
DoCmd.OpenForm "Form B", acNormal, , "Activity_ID = " & Me.cboINum
DoCmd.Close acForm, "Form A", acSaveYes
End Sub
I have a checkbox that determines whether or not to display certain form controls. How can I also hide the resulting white space that comes from hiding the form controls?
Can I put all of the controls in some sort of container and hide the container? The form objects are all displayed in order, so it shouldn't cause issue.
Can I create a subform for the objects and hide it? This would make the main and subforms based off of the same table.
Occam's Razor would be the preferred philosophy in this case. Nothing too fancy is needed.
I have a Split form displaying parts information and have all data displayed from the table including an obsolete field which is a Yes/No checkbox.
I want to display ONLY unchecked fields on a button click. I have tried this code so far but it didn't seem to have any effect
Private Sub cmdCurrent_Click()
Me.chkObsolete.Visible = Nz(Me.chkObsolete.Value, True)
Me.Requery
End Sub
Commands:
- cmdCurrent = show all unchecked fields
- cmdShowAll = show all fields
- cmdSearch = filter based on textbox entry
Other: There is also a hyperlink in each field (on the form only) to open each individual record for editing.
Field in question is chkObsolete
Command in question cmdCurrent
I have a continuous form that has several buttons, i am hiding them depending on which buttons they press before hand.
Is there a way to hide the spaces left by the invisible buttons using vba? or is there a simpler way?
I'm currently building a database in Access 2013. I've used Access many years ago, and not really in anger since maybe 2003, so I've been re-learning quite a lot. Here's an overview of my scenario, and issue:
The main purpose of my database is to allow engineers to log various bits of information when building, servicing and testing manufactured products for offshore exploration. Because some of the engineering team aren't so great with data entry etc, I've decided that, rather than deleting data, I'm going to use a 'deleted' flag: user clicks what he considers to be a delete button, but in reality an update query will simply update the flag and, because the form is built on a query which includes a 'where deleted = 0' filter, it'll no longer be shown. This will allow us more control over the data and will also allow me to check that everything is running okay.
My main forms include a number of subforms, including one which includes a second tier of nested form: Pin Maps for (electrical) Connectors.
What I need to achieve is fairly straightforward: as the user navigates around the form, I'd like a 'delete' button which is specific to that subform to become visible and for any other 'delete' buttons to become hidden. Once tested, the buttons would be 'stacked' in the same position at the top of the main form, so the user just thinks they're deleting the relevant record in the sub, or main, form.
I need to disable or hide the restore, minimize and close window buttons found in the top right hand corner of a form.
I navigation buttons that controls open, close etc already set up.
I have a form with various fields, two of these fields are "Date Purchased" and "Lease End Date". When there is no value entered originally, I have made a default value of 12/30/9999.
The problem is that when you open the form and these two fields are next to each other, the user says it confuses them seeing a date even though it is a dummy date.
Is there a way for me to create a expression that will be something like:
IIf(DateField = 12/30/9999, Me.Datefield.Visible = False, Me.Datefield.Visible = True)
or VBA
Private Sub Form_AfterUpdate()
If Me.DateField.Value = "12/30/9999" Then
Me.DateField.Visible = False
Else
Me.DateField.Visible = True
End If
End Sub
If have tried both ways and neither works.
Hi i've got a table with a couple of fields
What's in the fields is irrelevant but i'd like to
change that to *****
the original value should stay there
but when you view the record it should only give *****
for example
field value : HELLO
when viewed: *******
Does anyone know how this could be done I ones knew how it was done but can't find it anymore
plz help
I have a field which looks like this - "d123456", I will have to display the field without the "d" in front, meaning I will need to show "123456" Any idea how I can do this? Thanks!
View 4 Replies View RelatedI have created a query that will create a table automatically. I want one of the fields that I have defined in the query, not to show up on the table. the purpose of that field is just to check a minimum value so that the field next to it can use the value. when I uncheck the "show" box in design view the field completely disappears and Access asks the user to enter a value for that name since the value is used in the field next to it.
View 8 Replies View RelatedI'm sure this one is easy, but I can't seem to get the code to work right. I have a field called "Discharged" and "ProposedDischargeDate". What I want to do is if the "Discharged" field is empty, or null, I want the "ProposedDischargeDate" to be visible. Otherwise, I want it to remain hidden. I want this on either the AfterUpdate or the OnExit event of the "Discharged" field. Here's what I've tried:
If [Discharged].Value = "" Then
[ProposedDischargeDate].Visible = False
End If
or
' if the field is empty, show the proposed discharge date field
If Me.Discharged = null then Me.ProposedDischargeDate.visible = true
' if the field is not empty, hide the diagnosis field
If Me.Discharged = true then Me.ProposedDischargedDate.visible = false
But this doesn't seem to work. What am I doing wrong? Thanks for any help.
Hi
How do I easy create a checkbox that displayes a field when I check it.
For example, if I check a box named I agree, it shows a field with a phonenumber to call
Mike
I have a report that gives an update on construction projects. I've recently added an OLE field so I could attach photos and pdfs. I would like to see the photos and pdfs but not the empty space for the OLE field. I also want to see the construction project data even if there is no OLE. If I use the 'Is Not' Null in the query, the whole project record is not generated in the report. Is that enought info to solve?
View 1 Replies View RelatedHi,
I have a combo box which is populated by a table with the fields ID, First Name and Surname. What I want to do is display the first name and surname concatenated and hide the ID column, but populate the field with the ID number.
Is this possible?
I have a sub form with checkboxes. Each check box represents one of the columns/fields in my query. If one of the boxes is checked, I only want the column that matches with the check box to appear. I have done some research and have came upon the ColumnHidden property.How would one do this in a macro or VBA format.
View 1 Replies View RelatedI have run into some problems though. I have one main table where all the details of users are imported, I have created several queries for different types of courses users sign up for. I would like that when I select a query it only shows the users who signed up for certain course.So basically what I would like to do is if a field is empty or null to hide the whole row.
View 4 Replies View RelatedI have a form that has a drop down box with all of my project numbers in it. when I choose a project number, I can then choose from several report buttons on that same page that opens a report just showing that projects info (easy enough). I then have different report buttons that open those same reports, but showing every project (no filter).
The reports have a cover page that has the field, 'project number' in the front, so when a particular project is chosen from the drop down, that project number will show on the cover page (still pretty easy).
My question is, when I open the full report(no filter), is there a way to tell the report not to show the 'project number' field? since the full reports show every project, the 'project number' field will show the first project number, which is not what I want to do.
Is there a way to hide a field in a union query? I need to keep the field in the SQL statement because I need to order by it. The field is "Rank," but I don't want it showing up.
View 3 Replies View Relatedhello,
i have a form that shows up when I start my database. It has a combo that users use to select their initials.
This form is run by the autoexec macro.
The forms stores users names that then are propagates to other forms without having users each time selecting their initials.
Is there a way I can hide the first form behind others so that it keeps the data active? I have tried to minimixe it but still can see in the gray toolbar.
Thanks.