I have a DB in Access 2007 which I'm having trouble with. I have a form, "Sub_Det_Frm", on which I would like to place a button to print the current record, (Primary Key is an autonumber "Employee Number") to a report "Sub_DetForm_Rpt".
I've used the instructions from, oops I can't show you the link! It's h(double t)p(colon)//allenbrowne(dot)com/casu-15(dot)html but I'm getting this error:
The expression On Click you entered as the property setting produced the following error: A problem occurred while Employee Details was communicating with the OLE server or ActiveX Control.
This error occurs when an event has failed to run because Microsoft Office Access cannot evaluate the location of the logic for the event. For example, if the OnOpen property of a form is set to =[Field], this error occurs because Access expects a macro or event name to run when the event is fired.
hi i have 3 queries brought together in 1 form. i do not want a report to be printed out just the current record in form view. this is because i have a number of images per record. if i print out the current record and it only has 1 photo in a sub-form attached to the main form record, then the main form will print on 1 page which is what i want [screenshot 1]. But if there are 2 or more photos attached to the main record then the print command button prints out 2 pages for 2 photos, 3 pages for 3 photos and so on [screenshot 2]. any ideas as to how to limit the print command button to print out only 1 page per record regardless of how many photos their are attached to each record?? thanks
I have VBA code for a Print Preview button on the main form that previews the current record in a separate Report using this code:
Code: Private Sub cmdPrintRecord_Click() Dim strWhere As String
If Me.Dirty Then 'Save any edits. Me.Dirty = False End If
[code]....
I use this Print Preview code on a Button in the Form Header. The Main form lists head of household information. I also have a tabbed control with three tabs that have SubForms for Address, Children and Contact details. The problem I have is that if any of the subforms are left blank I get a Run-Time Error '3021': No Current Record. If I Debug (press the button), it takes me straight to this line:
highlighted in Yellow.Anyone on my database must have an address, should have contact details and could have children. If any one of these is blank then the print preview will not work.I would like to know how to stop this error happening for blank records in my subforms.
I have a report that is tied to a table. On my table form I have a button that prints the report. Is there a way to only print the report for the current record showing on my form?
Private Sub Command30_Click() DoCmd.RunCommand acCmdSaveRecord Dim strDocName As String Dim strWhere As String strDocName = "Civil Process" strWhere = "[FormID]=" & Me!FormID DoCmd.OpenReport strDocName, acPreview, , strWhere DoCmd.RunCommand acCmdPrint End Sub
I can get this code to print only one record but then the button will always print this record. It will not change and print the current record.
FormID is an autonumber to give each record it own id.
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean Private Sub Form_BeforeUpdate(Cancel As Integer) If Not bSaveClicked Then MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation Cancel = True
I need to find a way to print the currently selected record (by clicking a button in the form) as a form. I know printing is almost always done in records, but they use the forms by hand before entering them into the computer database.
One tough part of this is that this printing function needs to be sustainable through revisions of the form, as we will be constantly updating it.
Is there a way to print the form with only the current record shown without creating a second form or report?
Why I cannot print a report using a single record in a form using Access 2007.
I have added the button, I am using the following code:
Private Sub cmdPrintRecord_Click() Dim strReportName As String Dim strCriteria As String strReportName = "Receipt" strCriteria = "[ID]='" & Me![ID] & "'" DoCmd.OpenReport strReportName, acViewPreview, , strCriteria End Sub
However when I click the button nothing happens. I have attached the database ...
I am using the Contacts Entry form, and when I am on a record that someone has paid I want to be able to print from the Receipt report that has a simple formed up letter.
I have a form titled "Search by Contract # - Active". I tried adding a command button to print the current form. I created a report called "Active Contract" ro carry out this function. To open the form the user must enter a contract number to view the record. This is what I want the form to do. However, when I try to print the record from my command I'm getting an error. why it won't pull up the report?
I want to have Access run a query, open a report, and print the report based on the ID number of the form that I have open. Is this possible?
The situation would be, I have a form that uses the the primary key as a record number. After I enter the data into the form, with the form open I want to add a button to open and print a report of the current record number.
I need to Print a single record from a form but using a report layout.
I have created the form and created a report. A button on the Form kciks off the print but I get all records rather than just the one shown on the Form. Whats a really simple way of just selecting the Current record.
Where do I put an instruction saying print only this record:confused:
But what I need is that before printing, open the preview to set the margins and page size ... or at least to pre-configure so that when you press the button, and comes preformatted.
Is there anyway i can print the current record using a button or something ,which i am viewing using Data Access Pages , i have searched a lot of forums but have got nowhere , now i just wanna know how the hell can i use it to print a record or print any report for that matter using a DAP!!! can anyone give me a suggestion or just point me to some reference for using these DAP...
Is there a way to print the current record from a dao.recordset?
This is an exercise to compare data content.
I have a table with 30 fields and thousands of rows (rs1).
I'm comparing it with a copy of the same table (rs2) that has the same number of fields and the same rows and almost the same content.
I can loop through the recordsets and get the cursor to stop on a field whose values don't match, lets say on row #x
and the programmed message will say something like:
"ROW: 699 Field: [RequestStatus] rs1.VALUE: Closed, DOES NOT MATCH rs2.Value: VOID, in the comparison recordset"Then I'd like to print the entire Row, Row #699.
I thought I could use rs1.getrows but I'm not sure how to make that work.
I want to put a print button on my data entry form that prints the current record in a report that is laid out all nice and pretty. I found this code that works, but it goes straight to the printer - it does not bring up the printer dialog so you can select a printer.
Code: Private Sub RecordPrint_Click() Dim strWhere As String If Me.Dirty Then Me.Dirty = False End If
I have a project which produces a report of names, addresses, etc. I added a print button to the form to send the report to the printer. The code is as follows:
Private Sub Command32_Click() Docmd.SetWarnings False 'Docmd.OpenReport "rptAddresses", acViewNormal Docmd.RunCommand acCmdPrint Docmd.SetWarnings True End Sub
Both alternatives in the code produce the same result described following.However, the printed report includes only the first 2 colums of about 10 of the 90 plus records. If I send to to a PDF, it works fine. If I do a print view on the screen ir looks fine.
I have a continuous form based on a 'start date' - 'end date' query. I would like to be able to select certain records from this form to print.
I have added a 'print' field and have created a new query including this parameter which a report can be based on but when i run this report I am, of course, asked for the original 'start date' and 'end date' again.
Is there any way of linking the command button to only the records on the current form?
Hi All, I am looking for some help with a project I am working on where I need to automatically print a report from my database every time a new record is added to the table. The table contains 13 fields and the report needs to display 12 of them, the other being the index which is set to Autonumber.
The table is being updated solely by ODBC, this is working OK.
There is the potential for records to be added to the table very quickly via the ODBC link, so I need to safeguard that the report is being populated with correct information from the record that triggered the print event. Also, should multiple records be added in close succession, a report needs to be correctly generated/printed for each of one. The DB is to have no user intervention, and will just run on the PC at startup with all access menus/controls locked out.
Any information on how you think I should structure this, or any examples of helpful code that you might have would be very much appreciated.
I have made a navigation form that prints the current record out as a PDF and also the option to send the current record by email as a PDF. Both work perfect when you open the form outside the navigation form. But when you open it inside the navigation form, it does not print any of the information.
The problem is in the Query report, In the criteria box for field [RequsetID] it has
Currently, I have a database situation in which I am working in one database with data. If this data does not belong in this database I need to be able to take specific fields from the record and insert it into either a new table in a different database I have, or have it copied to a blank form that would accept it.
I have created a navigation form with quick access to the forms and reports I use most often. The Navigation Form (which I named Control Panel) automatically lands on the Tutor_Information Form on a current record. However, I would like for it to open to a blank form instead while retaining the ability to access the current records. Individually, when opening the Tutor_Information Form from the Navigation Panel, it opens to a blank record.
I used a 2 step macro
1. OpenForm 2. GoToRecord - New.
How can I make it do the same thing when landing on the Navigation Form (Control Panel)? I am using Access 2013.
