I would like to produce a serial which will have 4 members.The first, the second and the fourth members will be always CAPITAL Letters and the thirth one is always NUMBER.Here is an example for the format: AC3H
Each member will change in any line and never match... I would like to produce it by a button or a button for each one.The last important point for this issue is; I would llike to identfy the total number of serials.
I've searched through the forum looking for what i want to do with no luck so hopefully one of you kind people could help.
I'm setting up a DB that logs in a batch of parts to which i generate a batch no.
As the batch progressess through the works when a problem arises we generate fault records (I've set up another table for this and linked the batch no fields together). I want to put a serial no. on this form consisting of 'year' 'batch No.' and ?'Auto number'? From reading posts is it best to put the 3 items in seperate fields (less hassle)
My 2 questions are
1, how do i extract just the year from a date field?
2, This is the main problem. The auto number. If i use auto number to generate a unique number to log the record the number will be massive in no time at all. This is fine as the unique identifier for the record in a table but not for the serial number of the printed report. Idealy I want to have the batch number then a serial number that resets to 1 on a different batch No. For example
21098/1
21098/2 Batch No./serial No.
21098/3
22309/1
22309/2
22309/3
Just some more info this database is a multi user database split front and rear.
I hope i've explained this well enough, many thanks for your help in advance
cheers
EQ
I want a field to be a serial number made up of a letter of the alphabet followed by 3 digits. I want the digits to increase by 1 in each of the following record. For Example the serial number in the first record would be A001, then followed by A002, A003, ....., A142, A143, A144 & so on. I am fairly new at Access but I have experimented with AutoNumber, it won't work if the Field is not a pure mumber, can't get autonumbering to happen if I treat the field as text. I don't know where to go from here.
Any help is much appreciated.
Rob Shakesbeer
Hi,
I have a table that uses SerialNo as primary key. From time to time (its a long story...) I need to go in and update the SerialNo by adding x to it. Here's the problem: lets say the table has SerialNo's 1,2,3,4,5, and I try to add 1. I get 4 KV error's because of course, 2,3,4,5 already exist in the table. (So I would end up with 1,2,3,4,6 instead of 2,3,4,5,6.)
I really thought that Access should be smart enough to figure out that there really won't be any key violations after the updates are done, but I guess not.
So, what's the easiest way to deal with this?
Thanks for any suggestions.
I have a table that has a field for SerialNumberStart and QtyRequired, from those two I have a calculated field for the SerialNumberEnd.
I want to print a report from this table that if for example I have StartSerialNumber 34 and SerialNumberEnd 40 prints one report for each serial number.
I am working in ms access database form. I have a form with detail section. In detail section i would like to make sr.no field auto increase each time new quotation is created. Using AutoNumber didn't work because because it doesn't start the serial number from 1 for each new quotation.
Snap shot is also attached.
I have a simple database that I put my execptions in for the day for scanning. Is there a way that my serial field on my forum can check to see if someone already scanned that serial for that day using the "On Lost Focus" event.
View 7 Replies View RelatedI have done some searches and found out about creating joins and have almost achieved the results I want. I have 4 tables (Invoices, Labor, Purchases, and Payments). All are linked by Invoice number and all of the data is enter via a form called invoices and has a subform for all of the other parts. I am creating a query to pull the total amount of the invoice from the parts of the table and then taking the payment and showing a report for this.
I created 4 total queries and then have nested them into a query. I then perform the calculations and have my results that I can then put into a report. Only problem is that if there is not data in the labor table for an invoice it does not show the invoice in the final query. Homever, if there is no payment data or purchase data it will show the invoice and leave those fields empty. Not sure why this is happening I used the same type of join on all of the queries.
Would love to try and understand why this is not working correctly. I can get around this by just entering a 0 for work hours on the subform, but I am thinking that there should be a way to this without doing that.
Anyway, if any one can help me understand the problem, it would be greatly appreciated.
I have attached a very scaled down version of the tables I am working with and the problem is in the InvoiceTotalsQuery. I have not performed the calculations in this, just want to see why invoice 7 is not showing.
Any help is greatly appreciated.
My raw data contains a text string with various codes separated by an underscore. For example, my raw data would contain a string like this, "SAMPLE_DATA_ABC1_NYC", and each of those codes would have corresponding name that is mapped out on another table.
I'd like to set up a query that would evaluate the raw data, look up the associated code (e.g. "_ABC1_") and then return the corresponding name. (See screenshot for an example.)
I tried using IIf and InStr statements, but I keep getting excess rows.
Code:
SELECT st.Campaign, st.Month, st.Week, st.Placement, st.[Placement ID],
IIf(InStr(st.placement, ic.[findInventoryCategory]) > 0,ic.[InventoryCat],"N/A") AS [Inventory Category],
IIf(InStr(st.placement, pth.[findPathway]) > 0,pth.[Pathways],"N/A") AS [Pathway Name]
FROM RawDataFile AS st, mpInventoryCategory AS ic, mpPathway AS pth;
I have code to open a new email and populate the BCC field. My problem is the company usually uses a template for all emails they send, from access how to I het outlook to use the the usually template?
Thanks
Paul
Hi all,
I am performing the following query using an ADO connection from Excel;
SELECT [Date], SUM([Batch Qty]) As [Batch] FROM [Speed Fastener Packing] WHERE ([Date] BETWEEN #03/04/2006# AND #05/04/2006#) GROUP BY [Date] ORDER BY [Date]
When I execute this statement in Access it generates The following;
Date Batch
04/03/20063463000
06/03/20062747000
07/03/20062738000
08/03/20063867000
09/03/20064970000
10/03/20066235000
11/03/2006757000
13/03/20062170000
14/03/20063864000
15/03/20066929000
16/03/20063342000
17/03/20067017000
18/03/20063440000
20/03/2006985000
21/03/20064330000
22/03/20067578000
23/03/20064367000
24/03/20065003000
27/03/20063726000
28/03/20064383000
29/03/20066367000
30/03/20064358000
31/03/20064840000
01/04/20063136000
03/04/20061102000
04/04/20063000000
05/04/20065724000
06/04/20061687000
Why is the statement returning results that are not between the dates specified?? The [Date] field in the Db is in format Date/Time Short Date dd/mm/yyyy.
Dont have a clue what I'm doing wrong! TIA, any ideas appreciated!
Hello,
I have created a form to enable data to be easily added to the database table, however does anybody know why the query that looks up the records from the table does not return the new entered records, only what was originally in the table?
Thanks
i have a table with 3740 records in it
i do a query and outer join this table with a query and it produces LESS records = 3733
:confused:
now i always assumed (never assume it makes an "ass" out "u" and "me" !) that the records would be the same as the table you were joining from, obviously i've assumed wrongly, but why?
the query i'm using as my lookup query is grouped and i think that is causing me problems...if i turn it into a table, it works as expected
:confused:
and i check the obvious: no filters or SELECT DISTINCT...
any suggestions/explanations welcome
I am building a database which produces a report which I have formatted as a letter, I know I could have done this via a mail merge etc however...
What I am wanting to achieve is when this report(letter) is run, is there a way that when it is produced from a macro button embedded in a form that this report can then be saved as a pdf attachment within the same access database attached to a client record?
I am using the funtion:
Clng([text field]) to convert a text field into a number so that I can link in a query. Because it is an informix database, I cannot change the underlying table format.
When I run the query, the data is showing "Error".
I tried changing the other table to text and linking but it doesn't seem to link properly because the query doesn't work.
Your advice appreciated.
I have a query that is returning inaccurate "Date Completed" results. Here is the SQL:
PARAMETERS [Enter Start Date] Text ( 255 ), [Enter End Date] Text ( 255 );
SELECT DISTINCT [Qry BDM FA English Email Test Part 1].ADI_DISTRIBUTOR_ADVISOR, ADL_AAH_ADVISOR_ACTIVITY_HISTORY.AAH_DATE_COMPLETE D, [Qry BDM FA English Email Test Part 1].AGA_EMAIL, ADL_AAH_ADVISOR_ACTIVITY_HISTORY.AAH_EMP_ID, DateAdd("d",180,Date()) AS [Next Update],
[Code] .....
I have a non standard size report (for printing labels)
The report is just over 10cm wide and just over 15cm deep.
I have solved the blank pages caused by exceeding the width but I'm still getting a blank page when I move some data down. I am still within 15 cm but it's throwing me a blank page. Even if I extend the in design mode depth to say 20cm (ie the height in Detail) it's throwing a blank page (I can see this in print preview).
I initially set up the report (it's a long time ago so memory fades) using the label wizard setting up a label 4*6 inches (10.16 * 15.24 cms) and it is this i'm trying to tweak. Is there a property I'm missing somewhere?
When user enter the data other than date field or when date field remain empty and user press the Add button, it is giving error.
(Error 3075)
Syntax Error in date in query expression '#'.
while same code is working for text field. but it is not working for date field.
If (Me.rdate) = "" Then
Exit Sub
End If
Hi
Is any body know how to retrieve the manufacturer's hard disk serial No.? I want to use it in my access application to avoid piracy. At present I am useing a code which gives me Volume serial No., which got changed when ever my user format his hard drive. Instead of HDD firmware serial, code for retrieval of any other permanent No. like mother board or CPU firmware serial can help me to solve my problem
Rahul
I have the following code for the text field (Before Update)
If IsNull(Me![DyNo]) Then
Me![DyNo] = Format(Nz(DMax("[DyNo]", "[tblAllDet]", "[TheYear]='" & Year(Date) & "'"), 0) + 1, "00000")
End If
Me![DyNo] = Format([DyNo], "00000")
The code starts giving numbers from 00001, 00002, 00003 and so on. The problem was that when I have to search, I have to type the zeros before the number i.e. 00007, 00008 etc. otherwise the search form doesn’t show the relevant record. Ideally, I would like the numbering system to be 1, 2, 3, etc. (without the zeros). I tried changing the code to “0” but with the single “0”, I am unable to insert records beyond No.10. Is there a way to change this code so that I get only 1, 2, 3 etc and not with preceding zeros ? Grateful for help.
Hi, I have been trying to make a datbase so I can input the serial number of an electronic device (cell phone boards) , and also would like to be able to add additional info about the device. Most importantly I have to be able to "search" for the device by typing the serial number in a search box.
So lets say I have serial number 11111, 11112, 11113, 11114 listed in the database as "intermittent power failures", before I use the device I can type the serial number in the database and be able to recall the details. So if I type in 11119 and no hits come back, I know that one is not in the system yet; meaning it ethere does not have a problem, or the problem has not been discovered yet. If I type in 111111 for example, it would come back as a hit, saying it has an "intermittent power failure" problem. I have spent about 4 hours messing with access, I used it a while back in office 03, however I have never did anything like that, and to make things further complicated we now only have office 07. Does anyone have a template which is similar (I can modify the values) or know how to assist me to be able to create a database like this?
I'm in the process of streamlining the process to maintain our various access reports and queries.
My company's accounting software stores all record dates in Gregorian Serial format (don't ask me why). Currently for our reports we have a local hard-coded table that is manually updated periodically with dates in MM/DD/YYYY format and the coresponding Gregorian serial date number. To go from date to serial is a fairly straightforward access function of:
(Datediff('d','1/1/2000',[Date to convert])+730120)
For example if [Date to convert] was 2/7/2006 the output would be 732349. That's all well and good, however I am in need of a query I can build that will on the fly generate a list from say 1/1/1997 through 1 year after day being run just to be safe with two columns, one with date and one with the serial date equivelant so I can link to the accounting tables for date restrictions.
This way I just have to have the equation in one query instead of a hard coded table or do the calculation in every form or query that needs to look up these tables.
Unfortuantely I've been staring at accounting data (and am not an accountant) way too long and my brain is fried, suggestions?
I'm having multiple problems with my database like things such as -
i'm currently working on the Query 2 - On the Phone database (ignore Query 1) and i want to search for multiple plot numbers preferably in one parameter prompt with a comma to seperate numbers. (this could be a multitude of numbers so i would like to be able to input as many as needed). Also when i do search on this query since the Criteria is a 'Between' Value i would expect everything between the 2 numbers input to show up - but a lot of numbers out of the range show up too - why is this? (The Numbers are like "69 to 136" and they will show up - but 1-69 and 136-170 would too
I would also like to implement the search results from Query 2 into the Form i currently have made but it just opens up a access table when the search is made?
i cannot link my database as it is too big for the server - But here are the Criteria for Query 2:
Plot No - (criteria = Between [Enter First Plot No:] And [Enter Last Plot No:])
Site - (criteria = Like "*" & [Enter Site:] & "*")
Product - (criteria = Like "*" & [Enter Product:] & "*"
The Query is the one im most concerned about , i can live without a form.
Is this possible?
I have a Mitutoyo device that can be connected to a variety of Mitutoyo measuring instruments (in my case, it's a micrometer.) When triggered, the device obtains a measurement value from the instrument. One can view this value via serial communication in a program like HyperTerminal.
Is it possible to input these values directly, or indirectly, into Access?
Thanks ahead.
I have seen some API that gets the serial of the hard drive, but this information is not unique and changes when the volume is formated.
Does any one know of a way to return the orignal manufucture's information/serial which is unique(GUID) to the volume.
Any Idea will be highly appreciated.
Hope someone can help
I have a small test database which I'm doing for our dispatch dept.
It contains: Order No. / Customer / Ship_Date / Serial numbers (multiple)
I'm looking for a way to create a search query that will search though all the records to find a particular serial number.
There fields in the table are:
Shipping_Date
Customer
Order_No
Pallet_ID
Serial_1
Serial_2
Serial_3
Serial_4
etc
I need it to come back with the order number and pallet that it was shipped on.
Any ideas?
Thanks,
Paul