Forms :: Put Password To Open A Tab In Access 2010
Jul 31, 2013Is it possible to put password for a tab in Access 2010?
View Replies
ADVERTISEMENT
Forms :: Password Reset Form Doesn't Work In Runtime Access 2010
Feb 6, 2014I created a small database with a user login form, along with a password reset form. Running it in my sandbox as an accdr file, the password value resets just fine, but on my test machine with the Access 2010 runtime installed, the password reset form doesn't reset the password. I will try to describe the state of things as of this point.
1. The LoginF presents with a combo box for the user to choose their name, and a text box to enter their password. The code below is on the After Update of the password text box.
Code:
Private Sub txtPassword_AfterUpdate()
'Check if user has been chosen
If IsNull(Me.cboUser) Then
MsgBox "Please Select User Initials", vbInformation, "Warning"
[Code] ....
2. The password reset form has two text boxes for the new password and to re-enter the same, as well as a command button with this code.
Code:
Private Sub cmdResetPassword_Click()
If Me.Password = Me.PasswordTest And Len(Me.Password) & "" > 0 Then
DoCmd.RunCommand acCmdSaveRecord
DoCmd.Close
DoCmd.OpenForm "LoginF"
[Code] ....
As I say, this works as an accdr file, but not in the actual runtime environment.
General :: MS Access 2010 Cannot Remove Password
Apr 23, 2014I have MS Access 2010. I cant remove password because when I open in exclusive mode, file, info, there is no decrypt password option.
View 1 Replies View RelatedGeneral :: MS Access 2010 - Prompt To Enter Password On Closing Database
Nov 19, 2013I do not have a split db. I am prompted to enter my password when the db opens which is fine. However, when I close the db it prompts me to enter a password (not normal) and when I enter it it says invalid password. Also, when I try to change my password it says invalid password and when I try to compact and repair my db it say invalid password.
View 1 Replies View RelatedOpen Ddb File With Access 2010
Sep 11, 2012I'm trying to open a ddb file with Access 2010 and Access asks for a password to the file. The ddb file is the source file for an Invoices and Estimates Pro database. Invoices and Estimates Pro won't run correctly on Windows 7 in XP mode, so we're upgrading our invoicing to a Windows7 friendly program. However, we can't upload the ddb file data from our old program into the new, we need to first convert it into csv, which i'm hoping to use Access for. However, Access is now asking me for the password, which was never set in Invoices and Estimates Pro.
Is there a way to see what the ddb file password is? Or a work-around? This will save us literally a hundred hours of re-entering all the inventory data into the new program.
Open Password Protected Access 2007 Db In ASP
Feb 11, 2008Hi, I have been opening password protected access 2003 databases with ASP / ADO for years now. However now we have updated to office 2007 everything gone bottoms up.
I have an access 2007 database (newly made, not converted from 2003), and a fresh asp page. I've gotten the new connection string information for Access 2007 from the internet yet the page cannot open the database.
connection string being used:
sConnString="Provider=Microsoft.ace.OLEDB.12.0;Data Source=" & strPath & ";Jet OLEDB:Database PASSWORD= password"
When I try to open the page the error i get is - "Not a valid password" - 80040e4d. I'm 100% sure the password is correct, the driver is right (the server has office 2007 installed, and the new access driver from the M$ website). Every page i've seen on the internet says that the code I'm using is correct, yet asp still can't open it.
If i remove the password from the database it opens fine, so it's not a corrupt database, or bad path in the code.
If you can shed any light on my problem I would be eternally grateful - been working on it for hours now!
Many thanks
Ryan
Access 2010 - Delete Form Command Button With A Password To Confirm Delete
May 6, 2014All I am trying to do is insert to have a form with a "Delete Record" button on it. The problem is I don't want anyone to be able to delete a record, I would like someone to have to insert a password to confirm the delete.
View 13 Replies View RelatedBatch Process To Open Password Protected Access Db
Jan 30, 2008Hi All
I need to schedule the opening of a MS Access database which is password protected.
I think the best way to do this would be to use schedule a batch process to run, can anyone help with the script to create a batch proccess to only OPEN and CLOSE an MS Access database?
Thanks
General :: Open MS Access Database Locked By Password?
Mar 22, 2013I have MS access database. The database is password encrypted. I do not own this database but it is critical for me to see the contens of this database. I do not want to edit the contents.
View 9 Replies View RelatedForms :: Multi Select Listbox Access 2003 Code Gives Syntax Error In MS Access 2010
Oct 24, 2013I've been using the following code successfully in Access 2003 & now I need to migrate to Access 2010. The purpose of the code is to use the items that the user selects in the list box to build the criteria of a query. Access 2010 keeps giving me a syntax error when I try to run the query & I don't know why:
My code is:
On Error GoTo Err_Command151_Click
' Declare variables
Dim db As DAO.Database
Dim qdf As DAO.QueryDef
Dim varItem As Variant
Dim strCriteria As String
Dim strSQL As String
[Code] .....
The syntax error I get in Access 2010 is:
Syntax Error in query expression 'SELECT * FROM
qryContractListSummarybyDateContract3TYPEBREAK WHERE
qryContractListSummarybyDateContract3TYPEBREAK.Rep ortableName IN('Adbri
Masonry NSW');'
Forms :: Find Hex Or RGB Value For Blue Color That Access 2010 Uses By Default For Buttons On Forms?
Sep 5, 2014Where can I find the Hex or RGB value for the blue colour that Access 2010 uses by default for buttons on forms? I need to change some buttons to yellow (I know the code for that) but later change them back to the previous shade of blue, which is shown in the Properties pane "Accent 1, Lighter 40%".
By clicking in the standard colors area at the bottom of the colour chooser I can find a very similar blue #D6DFEC but it doesn't look quite right. And the "accent" colour does not give me a Hex value.Is that "usual" blue even one colour? How can I reset a button to that style having changed it?
General :: How To Use Automation To Run Word 2010 Mail Merge From Access 2010
Nov 26, 2013I have a MS Access 2010 application when the User opens form CONTACTS Form
◦User finds single record to be used CONTACTID is identifier to be used for selection
◦User clicks button to open form frm_MAIL_MERGE
◦Frm_MAIL_MERGE has a drop down combo box that reads the folder location where the application resides and displays all .DOTM files (that is all template files) and one more combo box which contains the CONTACTID.
◦User selects single .dotm file for merge
◦Frm_MAIL_MERGE has either drop down to select CONTACTID or UNBOUND data field for user to type in CONTACTID number
◦User enters CONTACTID to be used for the mail merge
◦User selects SUBMIT
◦Application merges selected .dotm file with the information in table CONTACTS for the selected CONTACTID
◦Merged document is saved on the user Desktop as xxx.docx
General :: Possible To Have Value In Excel 2010 Cell Used To Update Access 2010 Database
Apr 4, 2013Is it possible to have a value in an excel 2010 cell be used to update an access 2010 db?
For example, if in a spreadsheet "test" cell A2=3 then in a db "test" a column "value" is 3. However, if the value in the spreadsheet changes so does the db.
General :: Calendar Synchronization - Access 2010 To Outlook 2010
Mar 23, 2015I wish to work in Access 2010 with a subset of my Outlook 2010 contacts (all desktop- no network barriers), so I am exploring the Desktop Contacts DB found in Microsoft's templates. It passes contact data back and forth using the standard macros, but I wish to add more fields from Outlook. It seems I need to find the code associated with the macro. I believe I can solve the problem using a Linked table, but am wondering if there is another solution?
Calendar synchronization is another issue. Linking gets me to the Archive Calendars, but not the Current one in Outlook which is what I want.
Forms :: Access 2010 - No RTF For Textbox
Jun 12, 2014I am using Access 2010 and have a form based upon a query (qry_student). In tihs query I have a field called Details that contains the student's address; a composite of the relevant fields from the table tbl_student. I have used chr(13) & chr(10) to create linebreaks wihtin the query field.
I have a textbox where the Control Source is set to this field of the query.
The textbox does not display the data correct and I believe this is because it is in Plain Text mode.
When I try to change it to Rich Text I get an error message.
If I remove the control source then I can change it to Rich Text but then this negates the very purpose of the textbox.
Forms :: Converting 2010 32 Bit Access Form To 64 Bit
Apr 7, 2014We recently updated to 64 bit Office 2010, however there is a form created by an intern who has since moved on, anyways the form was created in 32 bit. SO hence we cannot open it. We get any error message that it was created in 32 bit and cannot be open in 64 bit Office. I have tried to resaved the form on a different pc with 64 bit office. But it will not allow me to save, possibly because the form is locked down from changes. The file extension is .accde.
View 1 Replies View RelatedForms :: Access 2010 Subform Filtering
Nov 5, 2014I have not used access since Office 97 so, I see many changes. A while back I used Access to create some minor tracking databases. Now, with 2010 I'd like to modify the database that I am currently using. I have a main form that tracks daily trips or tasking(s). Within the form are two sub forms that track:
1. People assigned to the trip through a combo box; and
2. Itinerary for this trip.
I have been asked to add a Trip justification(s) through a combo box which will have several selections avail that can be chosen and would apply to each trip. These can be added to by double clicking the justification (figured that one out). What I would like the sub form to do for each new trip that is entered is to display only these values as a single selection rather than 12 times (example) if there are 12 trips that have the reason justification as part of the trip/tasking.
I just can't seem to make this work. The personnel one and itinerary one work just fine (previously existing). I just can't seem to get the new one to work. I have checked that the new table is connected through the relationships. In the exact same manner. The new form has the ID (Key) OPID (to link each trip separately) and justification text field.
How To Crack Ms Access Password, I Have Set User Name And Password
Sep 12, 2006hi pals
i have set username and password for ms access file.
unfortunately i have forget that password?
how to crack that username and passowrd?
is there any softwares available?
i can easily crack the database pasword? but how to crack username and password of ms access file.
Forms :: Navigation Forms In Access 2010
Nov 20, 2014I have a Main (Home) form that has a sub navigation form (frmNavigationSubform).Need to access 3 forms. Forms 1,2 and 3. Also, have 1 options form.
Subform has 2 Navigation buttons. NavigationButton2 and NavigationButton3.
NavigationButton 2 Navigation Target Name = 1 (frm #1).
NavigationButton 3 has no Navigation Target Name. This is passed on when user picks Option1 or Option2 form options pop screen.
Now I can pass the name to the Navigation Buttons2 but the subform does not show it. I have to click on the Navigation Buttons2 again for it to show. What I want is when the user makes the choice in the options screen the name is passed and form 2 or 3 should load/show.
Forms :: Disable Date Picker In Access 2010
Mar 6, 2014disable the data picker for every field on every form in my application - without doing it the long winded way of manually turning it off for every field?
View 2 Replies View RelatedForms :: Multi-select Box On A Form In Access 2010
Jul 25, 2013I am very new to Access (I started two weeks ago). One problem I am having is I have a multiselect box on a form in Access 2010 and I want to base the value of a text box on the user's selection. However I would like the textbox to just be based on one of the choices and to allow the user to select any other of the choices along side this selection. How would I input this into the code?The line of code I am interested in looks like:
If Me.Reasons_For_Choosing_Physics.Column(2) = "No other ideas" Then..Could I add something like "No other ideas" + "(*)" to allow other selections alongside "No other ideas"?
Forms :: Access 2010 / How To Retrieve The New ID During Filling The Form
Sep 23, 2013Access 2010 frontend, SQL-Server 2008 R2 backend
During filling a form, I generate a code which should include the ID of this record.
But the ID is not available before update of the form.
If I save the record before all fields mandatory are filled, i get an error of course.
How can I manage this and get the ID "earlier"?
Forms :: Access 2010 - OpenForm Was Cancelled Error
Aug 5, 2013I'm working with an old database and I am getting this error. I have have access 2010. I starting to receive this error after I unlinked one of the tables.
Private Sub Command9_Click()
On Error GoTo Err_Command9_Click
Dim stDocName As String
Dim stLinkCriteria As String
[Code] ....
Forms :: Carrying Information From One Form To Another In Access 2010
May 19, 2013I have a unique "CustomerID" that is an auto number (this is how I link tables, forms, etc.), and "CustomerNumber", "CustomerName", "CustomerSubNumber" that could be null and could have duplicate values.
The first form I have is a Contact Info form where users will enter the contact information such as customer numbers, names, addresses, phone numbers, etc. This then links to an order form. My order form has a place to carry over the "CustomerNumber", "CustomerName", "CustomerSubNumber" values from the ContactInfo table. I would like these fields to automatically populate based on the CustomerID unique number as well as only show the information for that customer ID (including listing out any previous orders).
Forms :: Passing Value To Combobox On Load? (Access 2010)
Feb 18, 2015I have a form design where to enter a new "system" (what we call a new group of members) you have to specify the representative (the member that will represent the system).
If the system is new AND the representative is new, then both need to be entered. Typically this will be done through the "New System" form that has a combo box for you to choose the representative (but the representative won't be there!). If the representative is new as well, then the user clicks "Add New Rep" which is located next to the combo box.
This is where things get tricky, I'd like to use only 1 form to load a new rep. My idea was to use an openarg on the docmd.openform method that specifies what the control should be.
Code:
DoCmd.OpenForm "RepresentativeAddNew_Form", , , , , , "System_ID|" & Me.System_ID
That is the code that is called when the user click "Add new rep" and in the on load event I have this code:
Code:
'Use this version if the ID is text
Dim x As Variant
Dim strControl As String
Dim strID As Long
'If parameters exist, use them
[Code] ....
My goal was to pass the value to the combobox and turn it off, that way they can't change anything about it. This was nice because if the openargs is null (there were none passed) then the combo box would be enabled and the user could select the school that way.
But this doesn't work, for some reason, the combo box has NOTHING done to it (I have the control name correct).
Is this due to the way comboboxes work? Or am I missing something?
I should point out that the on-load event was not my idea, I found that online but makes perfect sense. I was trying something similar but was trying to use global variables because I wasn't aware that OpenArgs was a valid control!
Forms :: Access 2010 - Creating A New Record In A Subform?
Apr 12, 2014I am trying to create a database to manage IT assets, most of the structure is done, I'm now trying to get the details done.
The issue I am currently trying to tackle is to get a control button on one form to create a new record in the sub form that sits in the main form via another pop-up form.
So I have :
>PeripheralsViewForm - that has 4 control buttons (Edit Quantity, Edit Description,Add an Item and Exit)
>> PeripheralsSubForm - (Datasheet) which is referenced to PeripheralsQuery
The Edit Quantity and Edit Description open a separate form which allows the user to update only the quantity or description respectively (I have done it this way rather than allowing edits in the data sheet as I feel that it is too easy to hit a key incorrectly and overwrite data in the datasheet view) Both of these functions work perfectly (to my amazement) - I am using the id field in the subform to link to the pop-up form which then has unbound text input boxes, which I then write back to the subform.
e.g from edit button on click event: DoCmd.OpenForm "perquantform", , , " ID=" & Form.PeripheralsSubForm!ID and then from the pop-up form "perquantform" on the "Exit & Save" button I have :
Forms!peripheralsViewForm.PeripheralsSubForm.Form! Quantity = Me.newquant DoCmd.Close acForm, "perquantform", acSaveYes
This allows the user to select the record in the datasheet form and then click either the change quantity or description button.Also also the other reason I did it this way was because I just couldn't get the subform to requery when I had the two edit popups linked to the table or query.
The problem now is that when I click on the "Add an Item" button, it overwrites whatever record is currently selected !
The code I have is this:
From the "Add an Item" button on click action:
DoCmd.GoToRecord , Forms!peripheralsViewForm!PeripheralsSubForm.Form! , acNewRec
DoCmd.OpenForm "addperform"
And from the form "addperform" - "Save & Exit" button on click action:
Forms!peripheralsViewForm.PeripheralsSubForm.Form! PerType = Me.pertypedrop
Forms!peripheralsViewForm.PeripheralsSubForm.Form! PerMake = Me.permakedrop
Forms!peripheralsViewForm.PeripheralsSubForm.Form! PerModel = Me.newmodel
Forms!peripheralsViewForm.PeripheralsSubForm.Form! PerDescription = Me.newdescription
Forms!peripheralsViewForm.PeripheralsSubForm.Form! Quantity = Me.newquantity
DoCmd.OpenForm "PeripheralsViewForm"
DoCmd.Close acForm, "addperform"
--------------------------------------
the line "DoCmd.GoToRecord , Forms!peripheralsViewForm!PeripheralsSubForm.Form! , acNewRec" is what I have added to try to solve the overwrite issue, but when I run this it comes up with the error :
"runtime error 2498 - An expression you entered is the wrong data type for one of the arguments"
I have put this line in the "addperform" exit action and it comes up with the same sort of error.
Using Access 2010.