Forms :: Ready To Edit Appended Record To A Table
Nov 19, 2014After running an append query, the form created displays a blank/new record. How can I make the form display and ready to edit the appended record.
View Replies
ADVERTISEMENT
Opening Forms Blank Ready For Add Record
Dec 30, 2004I was reading some other posts and someone said they got their Forms to Open ready to accept data, just curious how to go about this...
View 4 Replies View RelatedOpening Forms Blank Ready For Add Record
Feb 4, 2008mmm the problem i get is that if i set data entry to yes it hides all my records :s any reason why this would happen? im using access 2000 btw.
View 5 Replies View RelatedForms :: Edit Record From Query Result As New Record To Another Table?
Aug 22, 2013I have a form that using "Query A" as data source. The Form need add (edit) a field value before save that Query Result to another Tabel. Is it possible to do that?
The PROCESS simply like below: Tabel A --> Query A --> Form -->Edit value a field -->Save to Tabel B
if it is possible, are there some requirements that have to be fullfilled?
Forms :: Show Newly Appended Records In Form Based On Table
Jun 26, 2014I have an append query that appends records to a table, and I have a form based on that table.
Users will click a button that will run the append query and then open a form for users to fill in remaining empty cells. How can I filter the form to show only the newly appended records?
Forms :: When Using Query With Grouped By Option / Can't Edit Record In Table
Aug 19, 2015I have a table called "Workorders" that I have created a split form for and have customised it so that it had combo boxes etc to enable the user to change the record data.I then needed to add some existing queries to the form so that I could calculate some totals from records in a few other tables. This all works fine EXCEPT that I can no longer change any of the fields in the records.
I am sure that it is something to do with the fact that the 3 queries I added to the form use the "Grouped by" option and based upon my Googling, this is probably the issue.Here is one of the queries:
SELECT DISTINCTROW [Workorder Labor].WorkorderID, Sum([BillableHours]*[BillingRate]) AS [Labor Total]
FROM [Workorder Labor]
GROUP BY [Workorder Labor].WorkorderID;
I need to have the totals and I also need to have the ability to change the data..
Recording Date That A Record Has Been Appended And Deleted
Jul 20, 2007Hi,
I hope someone can help.
I have a macro that appends and deletes records to a new table once the the record has been closed. I need to record the date this was done in my original table and the new table and have had brain freeze as to how to achieve this.
Any suggestions??
Appended Table Report
Mar 21, 2005I appended multiple tables to one table by using the copy, paste, append data to existing table. I now have 1,691 line items in one table. However, when I run a report off this new table and export it into Excel I only receive 1,300 line items.
View 3 Replies View RelatedSearching And Selecting Records To Be Appended To Table
Dec 6, 2004Hi,
I have a form that runs a parameter query to search for university name and then displays 2 fields, university name and course name.
I am having difficulty with a search button that i have on the form called search_command; it is supposed to run the exact query as when you enter the form, it does this but displays the result in a dataheet, i want it to repopulate my 2 text label fields as mentioned above.
In addition i want then to be able to go to a specific record, select it and then press a button to append it to another table. i ahve not started this part yet
Can anyone please help ?
Tables :: Custom Counter In A Appended Table?
May 14, 2014how can i make a custom counter in a table where records are appended from another table.
i have already used custom counter method in my database before by using this technique.
[URL]
but i want to make counter in a appended table.
Forms :: Add / Edit New Record Only Continuous Form?
Mar 27, 2014I have a continuous form with unbound controls. These controls write new records into a table using rec.addnew
If possible, I would like for the user to only be able to add/edit the new record only and not to edit the continuous form below. When I turn off edits on the form, I only get the new record to show. I found some pages that reference using code like .allowAdditons, .allowEdits and .allowDeletions but unsure of how to implement them since I have more than one control the user is entering data into. I also found another site that says to use a control to determine if the record is writable to: I do have a control that is set to =Date() on the default value.
Forms :: Cascading Combo Box To Select Record To Edit
Sep 19, 2013I am attempting to create an attendance database that needs to be able to be updated if someone calls in sick.
I have created a cascading combo box where you can select a date up to 15 days into the past with the following code in the rowsource for cboDate
Code:
SELECT DISTINCT tblAttendance.dataDate FROM tblAttendance WHERE (((tblAttendance.dataDate)>Date()-15)) ORDER BY tblAttendance.dataDate DESC;
an after update event has been coded to show only employees who have been scheduled for the day
Code:
Private Sub cboDate_AfterUpdate()
On Error Resume Next
Me.cboAgentName.RowSource = "Select tblAttendance.agentName, tblAttendance.attendance,
[Code]....
So basically what i need to do is be able to use the cascading combo boxes to select the date and employee to go to that specific record so i can update the other fields. Currently when i attempt to do this with my current form, it automatically goes to a new record when i select a date and name and doesn't update the existing record.
Forms :: Select Record To Edit In Form With Subform
Jan 3, 2014I have created a form (races) with a subform (yachts in a race) to edit data in joined tables. It seems to be working well but I am having difficulty selecting which record to edit in the main form. I can scroll through the records until i get to the correct race but this won't work well when there are a large number of races to choose from.
I can see that I can use linked forms to select a race from a multi form or datasheet and call up my desired form by a double click on the ID field. This should work but isn't really elegant with users scrolling down a long datasheet to select the race record they want to work with. Is there a better way?
Races are uniquely identified by 3 attributes: SeriesDivision, Date & RaceNumber.I have created an index in the Race table for these 3 fields which forces them to be unique.I would love to create an interactive routine which asks users to select from a list for each of these 3 attributes and then returns the form for editing with the appropriate race record selected or even cascading - users select a SeriesDivision can then choose the valid dates for the selected SeriesDivision and can then select the valid raceNumbers for the selected date
General :: Create Duplicate Entry On A Table And Then Edit New Or Old Record
Sep 2, 2013I am trying to create a duplicate of a certain record in a table so that the user can then edit the new record - or old record even as it doesn't matter - as long as one of them is original. The idea is that any revisions / changes are stored the user may of made.
View 2 Replies View RelatedForms :: Using TempVars For Form Open Criteria - New Or Edit Record
Apr 23, 2014MS Access 2010 accdb - Using TempVars open forms either for New Record or Edit Record.
Two sets of forms - One set works perfect but the other will not accept the criteria for New Record
MsgBox checks confirm the Variables are still valid in the 2nd form Open Event yet the If Then does not work.
Just before the If Then, an invalid use of Null message appears.
Forms :: Search Form - Select Record And Click To Edit
Aug 9, 2014I have a form which displays the records from a query (i have included a picture of this form) and allows me to filter them and create a report from the filter.
I'd like to be able to select a record with the record selectors (or preferably without) - and then go onto edit it in a new window and save the edit...
If possible also to select a record with or without record selectors and click a button to delete the record
searchdb.jpg
Forms :: Unable To Edit / Save Record - Runtime Error 2107
Apr 30, 2014My database was working fine. Now, if I have to save or edit a record, I get a message Run time error 2107. The value you entered does not meet the validation rule defined for the field or control. I am able to enter and edit new records in the table. I did not change any validation in form. Then it goes to debug mode and highlighted this code (me.recordsource=Listsql - is highlighted)
Private Sub ListSearch_Click()
Dim dBS As Database
Dim Rst As Recordset
Dim Listsql As String
Set dBS = CurrentDb()
Listsql = "Select * from MasterData where employeeid ='" & [Forms]![MASTERFORM]![ListSearch] & "'"
[Code] ....
Forms :: When Duplicating A Record Duplicate Is Created But Form Remains In Edit Mode
Feb 25, 2014I have a form with a duplicate record button.Sometimes when duplicating a record the duplicate is created but the form remains in edit mode (small pencil in the form margin).I also have a manual record counter on the form which does not refresh to the newest record number following the duplication? Both issues happen together and not independently.
I now have the standard MS Access record counter visible on the form to see whats happening and this always jumps correctly to a new record number when duplication is triggered, so when the problem happens the MS Access counter is showing one more than my own record counter.
If I use the standard MS Access record navigation buttons and go back and then forward by one record, the duplicated record is then corrected. The edit mode pencil is gone and both record counters read the same, which I assume has happened this has forced a save to happen
If Me.Dirty
Then Me.Dirty = False
End If
- in the current event of the form, would solve the problem, but it doesnt make any difference at all, its still no better, or no worse than before?Using CTRL + S removes the pencil, but doesn't correct my bespoke record counter?
Forms :: Edit Table Through A Form
Jun 30, 2015I have been developing a form that will allow me to input, edit and delete data in a table.I have the input, delete, clear, and close command buttons working ok, but I am having trouble getting the edit function to work.
What happens is that I highlight the line in the table (shown on the form as a sub form) click the edit command button, and the field are populated with the current data. I then edit the field that I want, and the add, button, changes to Update. When I go to update I keep getting an error message "Cannot update 'ID'; field not updatable.Below is the code I am using, when I go to the debug the arrow points to the "WHERE ID=" line.
Private Sub cmdAdd_Click()
'when we click on button Add there are two options
'1. for insert
'2. for update
If Me.txtID.Tag & "" = "" Then
[code]...
Forms :: Reference Table Being Updated When Launch Edit Routine
May 18, 2015Currently running Access 2010.
I have a small database where we enter audit log data. In my add add screen from the switchboard, one of the fields is the user the audit is assigned to. So that our group wouldn't be typing their names a bunch of different ways I created a reference table called "Ref Data 005 - Contact Name". So i pre-populate the Contact Names such that they will be more consistent.
The add works perfectly. I built all my screens using the forms wizards.
Now for the modify routine. If the user wants to go in an modify one of the other data elements, I force them in the wizard to do this modify by choosing thier name. Therefore, when i built this screen using the wizard I reference the "ref table" mentioned above. I then throw open another form displaying all of the fields based on the records that it finds for that user when they choose the name from the Ref data 005 table. Hope that makes sense. Ie.. they choose the records they want to possibly modify by first choosing their name from the ref table.
It correctly pulls the records for whatever user you choose. However, when you make the update and save, it is changing the Ref table name as well.
So for example if three users were in my ref as :
bill
joe
john
And you launch the form, lets say joe shows up in the list, when i change it to bill to retrieve bill's records , it will do that but when i make the change, then Joe is changed to bill in the reference table.
Forms :: Add / Edit And Delete Records From A Table Based On Combo
Dec 12, 2013I have a form to add, edit, and delete Records from a table. I am using the following VBA
Private Sub cmdEdit_Click()
If Not (Me.frmlEmpDetailsSub.Form.Recordset.EOF And Me.frmlEmpDetailsSub.Form.Recordset.BOF) Then
With Me.frmlEmpDetailsSub.Form.Recordset
Me.txtAddEditname = .Fields("Name")
Me.cboRoster = .Fields("Roster")
Me.cboPermFctn = .Fields("PermFctn")
End With
End If
End Sub
Instead of referring to the Subform to load the data i would like to refer to a combobox:
cboSearchName
Its not an issue but This Combobox contains 5 columns...
Forms :: Search Query With Subform - Edit Records In Related Table
Nov 8, 2014I have a query which looks for like * surname*
in tblemployee fname lname dept active
this works fine and i can search using a requery button
however as deptartments are stored in tbldepts
when i change the query to retrieve the dept name instead of number directly from the table and i try to change this on the datasheet subform it changes it in tbldepts instead?
how can i change what dept the employee is in (as in change the number in tblemployee - but display the actual name?)
Forms :: How To Create A Form That Can Edit Or Create A Record
May 13, 2014I am trying to create a form to enter data in a table. I would like to make it pull in info from a switchboard. If the record already exists I would like it to find it and allow me to edit the info. If the record doesn't exist I would like to be able to add a new record with the data input. What is the best way to accomplish this?
View 1 Replies View RelatedLose Record Edit Via Form; Input Continues As New Record
Sep 22, 2004PROCESS AS DESIGNED: The user logs in and is given a form displaying existing records that are coded (by userid) for that user to update. From that list, the user selects a record and continues to a second form (the first form closes) which displays all the fields of the selected record which should/can be edited by the user (plus a few non-editable key fields). There is nothing tricky to how the records are selected for display. A simple query behind the first form selects data records using the userID number. The second form does a simple record select using the active record ID number on the first form. Nothing tricky -- no modules just queries, tables, forms and simple macros to string it all together.
The user can open/close these two forms as often as necessary and the record will continue to show up until a value is entered into a "completion date" field. When that field is no longer blank, the record will no longer be displayed for use.
PROBLEM: About 90% of the time, things work as expected. But 10-15% of the time, somewhere between opening the record in the second form and closing the second form, the edited record totally disappears (as if it were never opened, it isn't even system date stamped) and the input information is inserted instead into a brand new record.
Users can sometimes tell when the edit record is dropped during processing, because key fields displaying previously entered data go blank and the displayed recordID (autonumber) is changed. p>
ERROR PATTERN: NONE! It can happen as the edit record is first opening, in the middle of editing the form, or at the end when closing the form. It will happen on a specific PC 2 times in a row and the third time be fine. It has happened at multiple locations but not for all people and not consistently for the same person/same pc. The same record that failed can be re-selected and work just fine the next time.
I cannot reproduce the error myself. I have tested everything I can think of without causing the error. I can lose changes and avoid a system date stamp if I abort my Access sesssion, but that doesn't create/insert a new record with my new input. It just loses everything.
I have wondered if a momentary break in the network/communications could break the connection to the application to just enough that the form remains on the screen, but selected record is discarded. Input into the empty form would/does insert a new record.
I have asked the IT Operations group to investigate if a network/communication problem could be the culprit, but they haven't gotten far on this. I have never seen this happen before and am totally stumped but am desperate to resolve it before user confidence is damaged.
About Ready To Give Up On Access
May 12, 2005I work at a Phamaceutical company in the US (based in London) and have a database that tracks atypical events. It has normally about 10 concurrent users and continually (once a week sometimes more sometimes less) corrupts. I have spent a lot of time validating the database writing the user requirements, functioanal and design specs as well as a 150 page IOPQ.
It is a split database with both front and back ends on a file server. I know this is not the best way to do it but the database is frequently updated with requests for new reports etc and I am not sure how to push down the front ends to all the use pcs. The database is about 40 mb.
I like the database. It is fully audit trailed and does what I need it to do, but the corruption thing is driving me batty. I have the jetutils with the viewer to see who is in the db (by pc name) and then I cross reference that to the person in the db and call them to get out. It is a real pain in the arse and I am just about ready to agree with the IT guys that Access is not a multi user database.
Should I scrap Access and go to SQL Server?
My System Is Ready Now. What Is The Best Installer I Can Use
Jul 21, 2007After hard work done, my system become ready. Now I want to deploy it in the clients computers. What is the best installation software my system files from the CD disk into the user computer?
Thanks Very Much