Forms :: Referencing Input Information From A Continuous Form On A Report
Jul 1, 2014
The database I have created is to produce product description sheets. From the switchboard, the user clicks a button that opens a form on which they can enter about 5 bits of information , then select the product they wish to produce the product sheet for and when they click a button, the product sheet is produced. The product sheet is a report with a subreport. The information entered on the form is included with more information from the database on the main report and the subreport is based on a union query which combines information from 2 tables to list the items included in this product. (the information the user inputs into the form is information that changes depending on the situation and is not stored in the database.
Now comes the next step in this process. Just as the information input into the form is temporary information, there is also one bit of information that needs to be input on a temporary bases for the items that are listed on the subreport. Each of the items on this subreport needs an assignment of AAA or BBB that needs to appear in the subreport on the line with that particular item. There can be one item in an product, or there can be many and the listing of AAA or BBB can be different from one item to the next or they could all be the same. The assignment needs to be made on an item basis.
My thoughts on this were to have a subform appear once the user selects the product on the form which would list all of the items and allow them to select either AAA or BBB in a column on this form. Then when the click to open the report, those assignments would carry through to the report.I have been able to create a continuous form displaying all of the items based on the union query but that's as far as I can get. Not even sure if that is the way to go.
Is there a way to reference the AAA and BBB input on the subform I described so that it displays in the report.
I have a database of experimental products. The database allows test technicians to input test information as well as product information (obviously in separate tables). Therefore before a tech logs test information, they have to first make sure the test product is in the database. They can do this by looking up the products that are in the database, and if the current one isn't they can input its information. In the lookup section you can also click on an individual product and lookup its test history.
What I am looking to do is add a button in the product information screen that allows the tech to open the test information input form with the test product information already loaded into the form. The product information portion of the test input form, is two combo boxes, one indicates the test products group and the other is the product number.
Looking up information on Google looks like i might need to use the OpenArgs function, however I have never used that before.
I have a form that I want to filter by different fields on different occasions. i.e., I might look at all records that have a review date of earlier than today on one occasion and I might look at all records that have a Yes in a Yes/No box on another occasion (date then being irrelevant.)
I have finished the form which has a query as it's Record Source.
The only way I can figure out how to accomplish my goal is to copy/paste the form with a new name, copy/paste the query that is it's record source, with a new name, and then put the criteria I want in the new query and make that query the new form's record source.
Is there a more elegant way I can do this. For example. I have a form consisting of buttons that I use as a Navigation Form. Could I, in the VBA that opens the form when I click on it's button, stipulate which Record Source the form would use?
I have a form and subform with the following names:
frmBasic sfrmCustomers
I have a unbound txt field called txtCustName on the mainform I want to populate this field from a field on the subform called CustName when the record is selected.
I also have an unbound combo box with the cust ids using the row source from the tables record source from the main form.
Me.txtCustName = Forms.frmBasic.sfrmCustomers.Form.CustName End Sub
This didn't work. So I put "= [Forms].[frmBasic].[sfrmCustomers].Form.[CustName]" in the control source of the text box on the main form I want populated.
The name doesn't appear in the field. I get #Name? in the field.
Ok, first post here and a bit of a novice so don't shout at me
I have a table called TblStored which contains hundreds of records. Within it is a field called VrcID. This field is made up of a combination of numbers and letters ie 81/28193GK. Each one is unique.
What I would like to do is produce this field in one continuous format, one after another with a coma inbetween. So if I have 600 records it will produce something like
81/281937K,84/1937K,92/28197H,81/28193HJ,87/281937G and so on.............until it reached the 600th
My ultimate aim is to get it onto a report (boring reading I know but their is a reason) but a form will do.
I have an issue with a BeforeUpdate procedure that I am trying to get working. I'm using simple elements here as this is a test DB, not the real one yet.
I'm trying to get the value from a Text Box TextData into a string cString. I've used a Dim statement to declare cString - I think the problem I am having is trying to get the actual data from the form. The error I am getting is:
Run Time error '2465'
Microsoft Access cannot find the field "|1" referred to in your expression.
The code I am using is:
Private Sub Form_BeforeUpdate(Cancel As Integer) Dim cString As String cString = [Forms!FormData!TextData] End Sub
(I've removed some code that is either comments or working since I have to retype things!)
The line cString = [Forms!FormData!TextData] is where the debugger highlights as the error.
I have a patient information database which uses a filtered form to show records for only one patient at a time. All the records in the database are linked together using one number, the patient's unique identifier.
I have designed a report which draws information from separate tables and generates a complete summary of information. This report depends on having the ID number of the patient to generate the report.
Originally, I had envisioned having a command button on the data entry form, which would then automatically take the ID number from the form, and generate the report. Though good in theory, it never worked out in practice, as I could never figure out how to make it happen.
Is there a way to design a macro or some other thing that would take the ID number from the field on the form, and use it to generate the report? Currently, I have it configured to prompt me for the ID number. When I enter it manually, the report is generated perfectly.
I have a complete working timeclock and trying to add the forms within the navigation form. I know I have to go back and re-reference everything and have already done so with the queries. But I cannot get the setfocus to work.
Here is the setup.
NavigationForm (navigation form) frmClockIn (top form) frmClockIn_SUB (bottom form) Open Navigation > Time Clock. Select an EmployeeID from the dropdown Click on clock in. (successful) cboEmployeID goes blank and try selecting the same employeeID to clock out and I get a debug at
Me.frmClockIn_SUB.SetFocus
I think there is a problem with my cboEmployeeID_AfterUpdate() as well.(related?) which used to be Private Sub cboEmployeeID_AfterUpdate() me.refresh End Sub
I have replaced "me.refresh" with "Me.frmClockIn_SUB.Form.Refresh"
(It used to break here, but not after I changed it.)
Not too sure where to set these forms to in the code
This im sure is an easyone to most of you but for me I cant find away around my problem!!
I have a form I use to enter infomation and I have also made a report that I am trying to get the infomation from the form onto the report.
I would like to have a command button on the form that once I click it, it then prints out the report. How do I get the information from a form to a report as when I have tried doing this myself it only allows me to use information from a query or table.
I have a Table with Emp_ID and Details of my Employees. I have created a query and set parameter [Enter Emp_ID]. When I pull up a report, I get a pop-up and it asks me for the Emp_ID. When I input same, I get the information I need. Everything is good so far...
My Question... I have designed a report when user will need to enter Emp_ID and click on a button and they will get the report "EMPReport" without having the pop-up window asking for EmpID.
I have been using the below code but I get the pop-up again and I need to enter the Emp_ID again to view the report
See below Code:
Code: Private Sub Image11_Click() If IsNull(Me.Emp_ID) Or Me.Emp_ID = "" Then MsgBox "You must enter an Emp ID.", vbOKOnly, "Required Data" Me.Emp_ID.SetFocus Exit Sub End If DoCmd.OpenReport "Rpt_HR1", acViewPreview, , "[Emp_ID]= " & "" & Me!Emp_ID & "" End Sub
I've been trying to get my head round this one , but i'm just to thick to get it.
I have a continuous form that lists all items at a certain location. The user selects a record by clicking on the record selector and then clicks on a command button with this code:
The user then enters inspection details in to the "DivingInspectionCert" form which i want to store in a table (DivingCert) which will relate to the item. On completion of this form the user then clicks on a command button with this code:
DoCmd.RunCommand acCmdSaveRecord
If Me.RecordsetClone.RecordCount = 0 Then MsgBox "There are no items to Print", vbInformation, "EquiTrac" End Else DoCmd.OpenReport "DivingInspectionRpt", , , ("EquipmentID = " & Me!EquipmentID) DoCmd.Close
When i click on this button, the report doesn't print and i get a message "No current record". The inspection details are not stored in the table. I did have the forms RecordSource based on the table "DivingCert" but that didn't work and i have just tried a query but it is still not working.
Would be much appreciated if you can help me. Thank you
I have some images stored in a SQL Table which is linked into Access. These images have to be stored in the database as I also reference them on other platforms (Android, Web etc).
In my Access programme I need to display a continuous form / report showing each image. Now, good old Access cannot display multiple images stored in the database on a continuous form. It can only do this if it is referencing the path to the image.
When the user views the form they will only see about 12 images at a time. I thought of a workaround which is to write the database images back to file to a local temp directory when the user loads the form. The user would be happy to wait for say 10 to 15 seconds whilst the form loads.
However, I cannot find an efficient algorithm to write the images back to a file. The one I am using is a BinarytoString algorithm by motobit which is fine for very small images, but anything over 100kb (which is still pretty small) it goes sooooo slow.
How to quickly write an image stored as a long binary in an Access DB back to a file? Or do I need to crack open my Visual Studio and write some C# DLL to use instead...?
I have a report that requires the user's input for a field called UserID.
I also have a form in which I want to have a button that can be used to print off this report (which would involve automatically entering the UserID into it). How do I do this?
Here is the code for the form button that I am using at the moment, but when you click it, Access still needs the UserID (duh!). So, how can I automate the input?
Code:Private Sub Command25_Click()On Error GoTo Err_Command25_Click Dim stDocName As String stDocName = "Menu" DoCmd.OpenReport stDocName, acNormalExit_Command25_Click: Exit SubErr_Command25_Click: MsgBox Err.Description Resume Exit_Command25_Click End Sub
Hi. I have been asked to find out if it is possible to automatically insert info from a access database into some word documents that require the same info i.e. a title or reference number so that, for example, if the title is changed in the database it will automatically change in the associated word documents.
Is this even possible as I have no idea or can something similar be done?
I want to save input into an Array, and then show this information.To enter data I am using a textBox. After "Enter" it should save info into the Array.If textBox is empty, it should show information. I would like to use a textbox too, that shows all the Array after pressing Enter.
textbox on the Form: txtInput, txtOutput..I have the following code, but I am not able to get it work:
Code:
Option Compare Database Public Sub Form_Load() Dim Data(10) As Integer Dim i As Integer Dim j As Integer
I have a bound continuous tabular form,However, based on data content in one field of a record, I want a checkbox in the same record enabled, so the user can check it if necessary. I have created a record set using the form as shown below, and I am looping through each record. To show that my code is referring to the field with required data content, I display it as a message box and it works, yet my checkbox does not enable.
I have the code in the form_load event, however, for testing purposes I have it behind a button.If I am seeing this properly, the code behind the button enables the checkbox for ALL records once the criteria in the required field is true, and based on the last record, which has no data content, it disables the checkbox in ALL records. I also have the PK ID for each record hidden in the form. Can I utilize that to target the checkbox of each individual record??
Form Detail -Form does not allow additions or deletions. Edits allowed -All fields are disabled and locked -I only want the check box to unlock if data is found in the "RequiredField" as referred to below. I have also tried if not isNull(requiredfield.value) then -enable checkbox, which yields the same results
Here is my code
Code:
Dim rstMyForm As DAO.Recordset Set rstMyForm = Forms!MyForm.Form.Recordset rstMyForm.MoveFirst Do While Not rstMyForm.EOF If Not RequiredField.Value = "" Then
New to the navigation form: I need several forms in the navigation form to all relate to the same client ID field. I have this information on the main form but the form with in the navigation form will not pick it up.
I have tried =[Forms]![Frm Client Information Navigation Panel]![ClientID] But just cant get it to pick up that information...
I would like to have something like the master link fields and, child link fields but when I add a form to the navigation form this option in not available.
I have a query that uses the input from a form as criteria, which is then used in a report. The form input is a drop down based on another table. This is a sales pipeline report, and the list is a list of sales people. The report works perfect for all sales people except one. When I run it for the one, I get the following error:
"This expression is is typed incorrectly, or it is too complex to be evaluated. For example, a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables".
I DO NOT get the same error when running the query by itself - so assuming there is something in the report causing this. I do have some sum formulas in the report.
Again, no other salespersons selected cause this error -- so I am assuming there is something in the dataset for this person that is causing the error.
I want to use buttons on a form to change the sort order on a continuous form. In the buttons click event I am using a public function (named Sort_1) to change the sort order. The first element of the event call is the name of a generic query (named Sort_1_Query1) and the query field to sort (LAST_NAME OR FRIST_NAME, depending on the button.)This is the Click Statement.
=Sort_1("Sort_1_Query1","LAST_NAME")
This is the Public Function Public Function Sort_1(SortName As String, FieldName1 As String) DoCmd.ApplyFilter SortName, FieldName1 & "between 'A' and 'Z'" End Function
I think the problem is in the use of quotation marks or trying to pass the query field name to the Do Command or the use of an ampersand.
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA" id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR" id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
4) Private Sub btn_editgs_Click() On Error GoTo btn_editgs_Click_Err Dim strWhere As String strWhere = "[editar_id] = " & Me.Gastid DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere btn_editgs_Click_Exit: Exit Sub btn_editgs_Click_Err: MsgBox Error$ Resume btn_editgs_Click_Exit End Sub
What I would like to do is create a list box that will only display the information from another form that is related to the current form.So I have a form call Equipment Catalog and that form is related to Equipment features 1 to M relationship and the Equipment Features is related to a Features form M to 1.
So what I want to do is display all the related equipment features in a listbox that is related to the current PK of that form.So if there is only one feature on one form the list box will only display that one item however is there is 6 features on another it will display all 6.I have been trying SQL and Queries but I still can't get it to work.
I have a report and within the report I have added some text boxes with some simple logic such as sum, count, etc. These text boxes function well as long as the logic is referencing existing fields. The minute I try to have a text box reference another text box I get the "Enter Parameter Value" box pop up. I don't understand this as the text box I am referencing has a vaule based on what it is referencing.
Example: 1st text box control source =Sum([existingfield]) I get a value. 2nd text box control source =[existingfield2]/[1st text box] I get "Enter Parameter Value" of 1st text box.
I have a continuous form sfrmAddress which is based on my table tblAddressList. What I am trying to achieve concerns the date fields DateFrom and DateTo.
DateFrom is a bound text box txtDateFrom
I am trying to put an IIf function in the Control Source of unbound text box txtDateTo
qryAddressHistory1 returns the LatestFromDate , so the most recent address.
The idea being if it is their most recent address, they have lived there until today, if it is not their most recent address it will display the date contained in the table (when they moved out or DateTo).
I have tried this a few different ways, double and triple checked my references and I'm usually OK with IIf so I don't understand where it's going wrong!
I should add I'm getting the #Name? error all the way down the column when I open the form.