I know this is simple, but I feel like Simple Jack this morning. I'm trying to take the text from a drop-down menu and use that as part of the form caption. However, the text is not what is bound, the ID number is.
View RepliesDLookup function. (this is for a stamp collection database).
On my form ("InventoryInput") I have a text box called "Catalog" for a numeric entry and a text combo box for selecting a "Country" in drop down list.
I want to query a table called "CatNameList" to get the "StampName" of the item (based on the entries of Catalog and Country) and populate that name in the text box. The fields in this table are called "StampName", "CatNumb" & "CName" respectively.
I have successfully placed the following expression in the control source of that textbox and able to populate the StampName I need based solely on the catalog number alone.
That express is :
=DLookUp("StampName", "CatNameList", "CatNumb = Form![Catalog]")
So it will populate the "StampName" data to match the "Catalog" number entry just fine.
However, I need to add a second layer to incorporate the Country.
Example : There is a catalog "1" for "USA", and a catalog "1" for "Canada" but both have different "StampName".
I have been attempting to get that second piece added with no success. Here is the expression I have been trying to get to work :
=DLookUp("StampName", "CatNameList", "[CatNumb] = " & [Catalog] & " And CName = '" & [Country] & "'")
Right now, the text box is just blank with the above expression. I thought it may be because there was no match found, but I have triple checked to ensure I have the spelling correct on the country name in both places.
Basically, I just need the dlookup to take the "catalog" and "country" off the form and match it to the "CatNameList" table fields of "CatNumb" and "CName" to give me "StampName" field back on the form.
Hi all,
have used the wizard to take values for a table dropdown field from another table
the table has
surname forename and class all of which reside in another table... ive tried to set up the bound columns so when you select a surname from the drop down the other two fileds also referencing that 6able are automatically filled in with their corresponding values.
so if the ref table had
smith john 1m
by selecting smith in the new tables drop down, the forename and class fields automatically select the corresponding values from the ref table..
im sure this is possible but cant get it to work and cant find anything on the web (although this is probably down to not knoing the right search string)
any ideas?
dubs
Having problems getting dlookup to work in the control source field of a text box.
My form has fields : Catalog # (numeric value) and Country (drop down text selection).
I would like to query a table CatNameList for a name (text) if the catalog # and country find a match on the table.
My field names on the CatNameList table are : Name, Number (to validate against the Catalog # entered on the form) and CName (to validate against the Country drop down on the form).
I am successfully able to populate the name from the CatNameList table on my form using lookup of the catalog # using this :
=DLookUp("Name","CatNameList","Number = Form![Catalog #]")
However, I will eventually have several catalog numbers that will be identical in the table CatNameList, thus why the country is important as the second criteria to be added into the dlookup.
I have tried for a few hours unsuccessfully to add the second portion to my dlookup.
This is what I have currently (not working) that I have been playing with, I'm sure I'm missing a quote mark, & or something simple.
=DLookUp("Name", "CatNameList", "Number = Form![Catalog #] And CName = ‘”& Form![Country] & ”’”)
I have a main menu "MainMenuF" in my database and I would like the database to be able to be searched by any of the column headings. For example I have a table titled "NewLabReportT" this table has many column headings like "Submitted By" "Reviewed By" "Title" "Abstract" etc...
I would like my users to be able to click a radio button with the same column headers on this main menu and have a box that pops up to say "Enter search parameter" and have that parameter be searched in the table "NewLabReportT" and generate a FORM not a REPORT of all of the listings in the database that have that keyword associated to that certain category searched. That way they can "CLICK" the exact field they are looking for and have it open right up to that form.
it possible to align the row source values of a combo box? i want to align it to the right instead of the left
View 2 Replies View RelatedI have a simple data entry form with drop down facilities on 2 fields. One of these fields incorporates a drop down list from a table but there are occasions when I wish to make a free text entry for the single record, but do not wish to add it to the drop down list.
I have tried to achieve this with a Combo Box but without success, although I am sure that I have read that it is possible.
I want 2 text , when I add a name to text 1 automatically set number to text 2 (Random),
View 3 Replies View RelatedGood Morning All,
I have an unbound text box on a form.
The Control Source references a text box on one of its subforms.
How do I make it return a 0 when the subform text box is null?
It seems like an if statement of some kind.
Thank you all in advance.
I have a report and within the report I have added some text boxes with some simple logic such as sum, count, etc. These text boxes function well as long as the logic is referencing existing fields. The minute I try to have a text box reference another text box I get the "Enter Parameter Value" box pop up. I don't understand this as the text box I am referencing has a vaule based on what it is referencing.
Example: 1st text box control source =Sum([existingfield]) I get a value.
2nd text box control source =[existingfield2]/[1st text box] I get "Enter Parameter Value" of 1st text box.
I'm scanning serial numbers in a field, but the results always start with an S...like S123456789 , S107432567 etc.. how can I eliminate the S and make this field numeric?Access 2007 being used.
View 4 Replies View RelatedI have a text box in a form that is producing a number from the query that the form is based on.In another Text Box i want to show the Value of the first Text Box multiplied by 3 because i am going to hide the first text box to only show the calculated number.
At the moment i have this in the control source of the text box [CountOfJobID]*3 but all i am getting is #####...I have set the format of the text box to General Number.
I have a number field in my subform that's autoupdated but I'd like it to display "weeks" beside the number without trying to store it, is this possible?
View 2 Replies View RelatedCode:
Private Sub Text74_AfterUpdate()
Me.Text1280 = Environ("UserName")
If Me.Text74 = "MACGH" Then
Me.Text89 = "PureGene"
Me.Text85.Value = Date
End If
End Sub
Is there a way to insert a line of code in the above that would add the next number to a 2 specific textbox's (Text103 and Text509)? Maybe if a table was created with all possible values and then the code would reference that table. There is probably a better way though. An example would be, if record 1 is A1 (in Text103) and 1 (in Text509), when record 2 is entered Text103 would be A2 and Text509 would be 2. Record 3 would be A3 and Text 509 3.
I have designed a database where there are several forms that pull information from the back end table and only one used to input data. I have changed the table to allow "Year Group" to be text so that I can input "R" for our Reception. On the input form this is fine, however, on the two forms that are used to compile reports it is saying "R" isn't an allowed value.
I have attached the front end file, back end table and the two affected tables are frm_Report Builder and frm_Analysis Builder. I'm only a beginner and I'm sure this is easy but I can't seem to find where these forms say this should only be a number
I just started my project database on my subject ITM4. My Database is entitled PCExpress Inventory System. I would like to know how to input (Text) in a Field where the Data Type is (Number) just like the North Wind.
View 3 Replies View RelatedI have a form containing 4 text Boxes txt1, txt2, txt3 and txt4
I want
txt1 show records from table empDetail having age between 18 to 25
txt2 show records from table empDetail having age between 26 to 35
txt3 show records from table empDetail having age between 36 to 45
txt4 show records from table empDetail having age between 46 to 55
Is there a way to create a text default value for a control box that is bound to a number field?
I have a combo box that is bound to an auto number ID but displays text. Bound column = 1, Number of column = 2, Column width = 0; 4cm
I want to use sample text in all my controls (and I know an alternative would be to use the control tip text). In a text box it is easy, I just set the default value to that value and then a before_update event considers the text box empty if the field value is the default value (e.g. Name text box has: Name... as default value). This doesn't work with my combo box since the bound column is a number. I could create a value in the table but then it would appear in the drop box and it is messy.
[URL] .....
I'm currently working on fixing an older 97 database that I've updated to 2010. I have just populated the Drop down box with about three fields. Ideally what I want to do is after having selected the item number from the drop down box I then hit the button that creates a report with the information about that item number.
At the moment...If the box is blank it reports all the item numbers, however if i fill the box(select an item) it returns nothing i.e the report is blank.
I've looked at the query that builds the report, there are only three fields that populate the. location, part number and description. from a tbl called MainDetails
the only other thing:
If([Forms]![frmReports]![FLoc] Is Null,[FUNCTIONAL LOCATION] Is Not Null,[FUNCTIONAL LOCATION] Like [Forms]![frmReports]![FLoc])
it has a criteria of <>False
*FLoc is the drop down box *functional location is the location field.
I believe all the above does is populate the report if Floc is empty.
What can I put to make the report generate what ever I pick in the drop down box 'FLoc' source the three fields from the 'MainDetails table'.
I'm trying to create a database for a construction company, as an experiment more than anything, and my problem is this:
I need to create a set of identical records in the table "buildings" based on the information entered into a text box by a user on the form for registering a new project. I want each record to be identical except for the "plot number" field, which I want to start at one and increase to the number of buildings defined in the text box.
"Projects" is one table and "Plots" is in the other.
How to reference a value on a combobox in one form from an object on another form.
I have put in =Forms![Company Name].Combo7 in the field object on the form and I have got the ID autonumber of the Company Name. So far so good. It worked.
When I put in =Forms![Company Name].Combo7.column1 to get the company name to appear in the field I got an error.
What is the correct entry that needs to be entered?
I Open my Form
frm_process_ppl (single form)
which has the datasource as qry_process_ppl_2
on this form is a subform (continuous)
frm_process_ppl_orig
with the same data source linked by [ALINK].I want to run an append query when I click on one of the controls of the subform.On the subform there is a uniqueID called [LNK]
In the append query I have the following criteria for the LNK field [Forms]![frm_process_ppl]![frm_process_ppl2].[LNK]..However it is not working.I think my criteria is wrong.
(This worked fine with just one form but I have had to add an additional subform and the original form was continuous. I cannot add a subform to a continuous form so I decided to creat a single form to house the continuous form) I just cant reference what Im clicking in my query !!
I have a main form, 2 sub forms, and 2 text-boxes on the main form. I have a search box now for the first subform. Works perfectly. Once the users filtered based on name, I want them to be able to select that filtered record which would filter another subform.
Right? ok.
My first attempt was to assign the ID that was selected to a textbox on the main form, then automatically requery the second subform based on that value. I used this way on my search box. I'm sure there is a way to go directly from clicking the value to requerying the second subform, but i don't know it.
That being said even the indirect first attempt isn't working. It all has to do with the ".", "!", and ordering of this stuff. It has to do something with Parent child, but beyond that I'm at a loss.
Code:
Me.[Collateral] = Acct_Reference_id
Me.[Navigation]![textbox] = Acct_Reference_id
...
'Me!Subform1.Form!ControlName
'Me!Subform2.Form!ControlName
'Me.Parent!ControlName
I did find this very useful site [URL] ...... It shows what code you can use depending on where you are and what you're doing. Even with that as a resource, i'm still at a loss.
Hi all, i have a 2 fields in a subform named "HRS_ABSENT" & "ABSENCE_REASON" i'm trying to create some code that will display a message if the user inputs any number into the "HRS_ABSENT" field & leaves the "ABSENCE_REASON" field empty. I want to force the user to select a ABSENCE RESON (these are 3 letter codes) from the drop down list, if they enter a number in the HRS ABSENT field. Ive tried the below code but it doesnt do anything :-(
Anybody please help me out?
-------------------------------------------------------------------------
Private Sub Form_BeforeUpdate(Cancel As Integer)
If HRS_ABSENT = >0 & ABSENCE_REASON = FALSE Then
MsgBox "Please select an Absence reason"
Cancel = True
End If
Just fumbling my way around Access 2007, is the only way you can create a drop down list of number by creating a table and inserting a combo box? I am trying to create a list of hours for example:
0.5
1
1.5
2
Etc...
I am trying to limit the number of records displaying in a subform [amendedLoans] by selecting only those records that have the same ClientID as the mainform [Customers] and the same loan number as the subforms parent form [ClientAccounts loan changes].[loanno].
I have no difficulty selecting records just using the clientid but as soon as I add the reference to the subform [loanno] field I get no selection of records. I suspect there is an error in the where clause for
[Amended Loans].Loan)=[Forms]![customers]![ClientAccounts loan changes].[Form]![LoanNo]) .
I have built the clause using the expression builder and have had many attempts all ending up with the same result. I'm now at a loss as to where to go from here....