Form 1 - Data entry for a new project
Form 2 - Data entry for a task associated with the project in the Form 1
Button on form 1 that opens Form 2.
What I am trying to do:
Use a combobox on Form Two to choose the Project entered into Form 1, so I can capture the Form1 PK as a FK on Form 2.
Here is the problem:
Refreshing the record on the button click so that the new option entered into Form 1 shows up in the combo box on Form 2.
Full disclosure:
I'm not much good at VBA so I have been trying to do this by customizing the button macro. I have tried Refresh, and Requery, but I can't seem to get it to update the list in the combo box.
2 questions:
1. How can I get this accomplished?
2. Is there a better way to get this data into the table than what I am trying to do?
The above code works and my issue is how can I move the mouse to the OK button and click on it to. The reason why is when I SETTEXT to the address bar it does not refresh so I SETTEXT to the file name box to navigate to the prescribe address which will refresh the navigation bar once the OK button is clicked. How to refreshing the navigation bar.
I have a refresh button next to a box in my form. I would like to make it so that when someone clicks another field or out of the key box it will refresh the form automatically because that box makes other fields autopopulate and the way I have it set up thus far is that you half to refresh the form somehow to get that date to come over.
I have a continuous form with a button 'Cmd1' & a textbox 'txtMail' which is set to visible no.
When the user clicks Cmd1 - then txtMail becomes visible.
I can do it using vba on the buttons click event but when it executes txtMail for all the records become visible.
How do I use a button's click event on the form's current record - Private Sub Form_Current() so that when the user clicks Cmd1 on the current record only txtMail for that record becomes visible.
So I have a continuous form and I have a button that is pressed when a job is released and it record a date in a field. I wanted to turn that button to disabled after pressed but after lots of reading found that it couldn't be done in a continuous form due to it disabling all buttons . So I decided to just make the code populate the field only if it was a null value so that it wouldn't overwrite a value if someone pressed it more than once. Well the null is my downfall in all this. I cannot make it compare and populate the date when the button is pressed. I have tried all I can find on the net and all I can think of.
How to open a search form with a mouse click on Button_Search
My idea is to pop up a form where user can enter the search text and select the required name and get back to the old form with all details about the entry. This form alone is workign fine. I want to call it in a mouse click. and pass the data back to old form.
I have 6 text box on the form which are unbound. Now we enter the entry in these boxes then I have update button on the form to update the record in table. all fields should be clear after update the records in table so I can enter the new entry.
I am using ms access 2007. Is there any liberary to add?
I have a form which contains one subform. On the subform I have a command button which saves the record just entered. On the main form I have a "refresh form data" button which updates the main form so that the calculated controls can show the correct results based on the data just entered?
Can anyone tell me how I can get the "save record" button in the subform to subsequently refresh the data in the main form as well, thus saving a button???
How do you refresh all of the data on a form when the tables that are the source for dlookup fields on the form are changed by command buttons on the form?
I currently have a database where new records can be entered in a "New Part" Form and Records can be viewed(but not altered) in a "Part Search" Form. The forms are the same except one is allowed to edit. I have also created another form where I am trying to search the "Part Search" Form via a tracking number. I want to have a text box where users enter a tracking number then click the button to take them to the record on the "Part Search" Form.
Test findings showed that when I open a form the data does not update. I added a refresh action after the openform action. If I want to open three forms via the macro, do I need three refresh actions, one after each openform action, or simply a single refresh action that would apply to all three forms.
When i am clicking on refresh button the query which is generated by drop downs is not updating in the form, but it was updating in the query table. How can i refresh the query on the form where drop downs are..my code is
forms![Opening]![RepQuery].Requery
where Opening is my form name, repquery is the query which i generated in form.
Using Access 2013.I have a Search Form with a Run Query button. I would like to add a button that clears the criteria entered into the search text boxes. Right now to change the criteria I have to manually delete everything entered, closed the current query it had open then go from there. I have tried using the command button wizard, form operations, then refresh form data. When I click that button a window pops up "The command or action 'refresh' isnt available right now".Is this not the correct way to set up what I need? What other options should I look into for setting this up?
I added several records in another table but it wont show the records until I press the Refresh button at the ribbon of Home-> Refresh. How can i view the records automatically without pressing the Refresh button?
I have a navigation form with a combo box. The combo box has a running list of manifest numbers. I select a manifest number, then click a button that brings up a new form with data related to the selected manifest.
However, I have to click and unclick the 'Toggle Filter' button on the new form to show the correct data each time I open the form.
I have created 3 forms, 1 of which will update the sum of 5 text boxes immediately after numbers are entered in, while on the other 2 forms I had to create a refresh button so that the numbers will add up. The properties in all of the forms and the text boxes seem to be the exact same.
hi, i have a search form, and when you double click on the record, it opens that record in my main form (which opens filtered)
this is fine because it displays the record that i want to see
however, when i try to perform other tasks on my main form, such as choosing the id from a combo box and finding that record, it wont work because the form is still filtered, one way to get around this is to open and close the form, but is there a way that i can implement something into my refresh button that removes a form filter.
Private Sub Refresh_Page_Click() On Error GoTo Err_Refresh_Page_Click
In ContactIDForm it contain 1 textbox name 'TextBox' with Button Name 'Btn'
In ContactIDForm there is only 1 Text Box ContactIDTextBox and 1 Button. User Enters ID in TextBox and On Button Click Event it should check data from TextBox in Table name (ContactDetailTable) in field ContactID and if there is record matching, ContactInfoForm should Open else NewContactForm should open with ContactIDTextBox value in it.
I have a database that had some code that enabled the user to click a button and it would take information from one Access query or table and paste it into specific locations in Excel. This is important because the last worksheet has specific formatting in place.
If it didn't, I'd just use the transfer spreadsheet option and not even bother opening Excel at all with code.
I've got it working well except for the last part. The last query being copied has eight records and only one is being sent to Excel. Same code as the other queries where all of their data is going to the right spot in Excel with the right number of records.
I am very new to Access and have virtually no experience with vb, I'm trying to build a customer database with some forms that enable myself and a couple of others to keep track of customer contact.I have designed my form with 5 buttons at the bottom of the page with different future date values, I have made a field in my database called FollowUpBy and i would like to be able to click the buttons and have access take today's date plus the relevant follow up time-scale and insert that into this field. Also but on a separate note, I have the yes/no box for follow up required is there a way to make the buttons at the bottom and the date picker unavailable (perhaps shaded or crossed out) unless this box is checked?
I have a form listing out a bunch of clients. There is a button associated with each client that pulls open a new form with additional client information. There is information that is calculated on the backend and stored in the database when a user is inserted or different fields updated (i.e. there are reports that are due different time frames after the clients admission date. I automatically populate the database with those dates once the clients admission date is updated).
The problem I am having is that when I enter a new client or update a current client with new information and then click the button to go to their details page, those auto-populated dates are not populated. I am calling a subroutine that is within a module when the button is clicked. The subroutine works fine at other instances throughout the application so I know there is no issue with the code. I even call it if they click the close button, but before the information is auto-populated, I had to run a Me.Requery on the close button. I think this is because the records are not actually being updated in the database. I even have a DoCmd.Save acForms, "Clients" command before running the Call updateDatabase subroutine, but that doesn't do the trick. I can't run the Me.Requery after the click of the details button because when I do that it always opens the details form to the first ORDER BY record. I think that I need to update the selected record and re-call it in order for this to work.
Multiple IF functions in a form. I have a button that on click will print a report if certain fields in the form have data in them. If not, a msgbox pops up to let the user know that data must be filled and then sets focus on whichever field needs data in the form. There are many IF statements, and they all work fine until I get to a certain one then the remaining IF does not continue.
Here is some code:
If IsNull([Alert]) Then MsgBox "An alert time is required." _ , vbCritical, "Data Required" Me.Text591.SetFocus Exit Sub Else If IsNull([Enroute]) Then
[Code] .....
The next IF argument will bring up the msgbox when there is no data, thats great. However, when the user fills in the field and continues with the button click to print the report, the button does nothing.
Here is the next IF, the one with the problem:
If IsNull([Combo608]) Then If IsNull([Combo620]) Then MsgBox "You must select either a planned event or an emergency event." _ , vbCritical, "Information" Me.Combo608.SetFocus Exit Sub Else
How to get it to work, to continue with the remaining IF arguments after this one (there are several more)?
Or are there a better way to code this and not have the many IF arguments?
Often I use Labels as buttons due to the fact I can colour them the way I want, and use the on click event to trigger code. The code below however works for a command button, but not a label button.
DoCmd.OpenForm "frmdatetime" Do While Forms!frmdatetime!OKFlag.Caption = "False" DoEvents Loop
When this code is run by clicking on a command button, it works fine. If run by clicking on a label, frmdatetime opens, but the mouse will not work on either of the 2 open forms unless you go down to the windows task bar, jump onto another window, and back onto frmdatetime. If I remove the loop with the DoEvents in it, then the problem does not occur.
Can anyone enlighten me as to why this behaviour occurs.
I have a textbox which I need to refresh when my Query is refreshed. Currently I only have the ability to requery with a Button but when that button is pushed I also want a text box to be refreshed. This is what I have currently in my On Click property of the requery button:
=[SearchSubformNew].[Requery]
Is it possible to have 2 On Click events? If so I just wanted to add the line to refresh my textbox which is named SummaryText.
