I need to refresh listbox field (Total_price) situated on parent form. My sub form is called "Lines_form". I want to sum values of all lines for column "price". Result of calculation I want see in parent form in field "Total_price". My parent form is called "Main_form".
On "price" field settings I used AfterUpdate event : Me.Parent!Total_price.Requery
I see result in parent form, but value isn't saved to table and I can't use it in next calculations.
I need refresh/requery/save patern form. I try this code:
I have two subforms on a "Page"/Tabs. Subform #1 is a continuous form which accepts data about dimensions of a pattern piece. The other subform needs to update its information display each time the last control of the first subform loses focus, because it tells me how much material is required for all pieces of this pattern that are entered.
My first feeble attempt at this was to add the following code to the "Lost Focus" event of the final control on the first subform: Form.Parent.Refresh
This succeeded in forcing the second subform to re-run its calculation.
However, after the recalculation took place, I wasn't able to move to the next record on the first subform. This subform is a continuous form, and I need to be able to add another row of data and then see the second subform change based on the additional information in the first subform.
I have a field on a form that is the results of a dlookup to a table.field. I want the value to be updated when I execute a button that is running a macro. How do I do this automatically, and not have to hit the refresh button?
I have a form and a subform in it. I added New cancel button in the form so that the the user can cancel the record creation and no record will be inserted in the parent table.
But when details are entered in the subform (a datasheet) row records will be created in the subform table. what is the correct method or how to cancel these records if the user choose to click cancel button on the parent form.
I have a form which contains one subform. On the subform I have a command button which saves the record just entered. On the main form I have a "refresh form data" button which updates the main form so that the calculated controls can show the correct results based on the data just entered?
Can anyone tell me how I can get the "save record" button in the subform to subsequently refresh the data in the main form as well, thus saving a button???
I have a parent form tied to one table, and a subform in it that is tied to another table. The relationship is one-to-many, and if there is more than one record in the subform, when clicking next or previous, it scrolls through the subform items. I would like the Previous and Next buttons to move to the Previous or Next parent record, not the child records.
In the detail of the parent form, there is a tab control block and each has subforms on them that are exactly alike for WorkOrder Notes, History, Specs When the Work Order subform is accessed (connected by SerialNumber, WorkOrderID and CertDate) the default WorkOrderID should default from the parent form, the SerialNumber should default from the parent form, and the CertDate should also default from the parent form.
What is the syntax to get these fields to default to the values parent form BUT not specifically referencing the name of the parent (because there are 5 differnt parent forms)?
I have a form which has a field named VendorID it gets data from the following query
SELECT TOP 2 V.VendorID, V.VendorName, COUNT(A.ClaimNumber) AS Total_assignment, V.VendorStatus FROM dbo.VendorMaster V LEFT OUTER JOIN dbo.VendorAssignment A ON V.VendorID = A.VendorID GROUP BY V.VendorID, V.VendorName, V.VendorStatus HAVING (V.VendorStatus = N'Active') ORDER BY COUNT(A.ClaimNumber)
So, if we look at the code it should give me top 2 by ascending , but whats happening here is once i refresh it gives me top 2 and it stays the same until and unless i go to view mode and come back to the form mode( refresh) again. automatic code or something which can make this one update automatically?
I have a relationship between two tables; the parent table is "Client Information" with a primary key of "Client_ID", the child table is "Event Information" and the foreign key is "Client_ID".
I know that within the Event Information table I can select which Client_ID to use as the link. I want to have that done within a form, however. I have a form for Client Information with a subform for Event Information. If I go into the table and manually set the Client_ID then everything displays fine.
How can I set the Client_ID in the subform to automatically match the Client_ID in the main form? I can only assume that these solutions require the parent/child relationship to already have been established.
Parent form/table, with a subform (separate table, 1:M link on "ID") The parent form data stays fairly constant (occasional change/update), with multiple entries in the subform for each parent record which are added to more frequently The master table has a field "last interaction" which I need to update whenever a new entry is made in the subform/subtable It updates fine when I change an entry in the parent table/form, but not when I add a new subentry for that parent
Private Sub cboConsulta_GotFocus() Dim strsql As String strsql = "SELECT ID_Verificacao,Verificacao FROM tblVerificacao WHERE ID_Peca = '" & Parent!TxTId_Peca & "' ORDER BY Verificacao;" Me!CboConsulta.RowSource = strsql End Sub
Message Box: Data type mismatch in criteria with data
After I enter data into one field in a record I would like the form to save the record when I move to another field in the same record. It seems that the record is only saved when I exit it entirely. Is there a way to save a record when moving between fields in that record? Can this be done without using an Event Procedure for each field?
What I have is a form that takes in information regarding test data. Each test run can record data for multiple requirements. I am able to pull all data fine, however in order to make it easier on the user i was hoping to populate the requirements subform based on a selection of "test group" in the main form.
Commonly run together requirements can fall in to groups. I have a selection box for these groups in the main form and a table that stores these group id's and group setup. Is there a way to autofill the tables records that the subform is linked to based on the selected test group?
I have a parent form and connected to it is a subform. On the parent form I have a checkbox which enables and disables fields on the parent form and also hides the subform.
What I want to do is when the user unchecks the checkbox, this action also deletes the associated subform records, if there are any.I'm sure that this can be done with an SQL Delete query in VBA.
I've got a Parent form (frmProspectDetails) with a subform linked (fsubProspectSkill).
This form is for users to enter general information on a prospect (names, position, height, weight, etc) on the parent form and skill levels on the subform.
Currently the subform is set so the user has to manually select the specific skill set for the prospects position, and then enter a value for each skill level(1-99).
I'm trying to get the subform to auto populate with a specific skill set based on the position selected in the parent form, so the user only needs to input the skill level without selecting each specific skill.
This data is then stored in a table (tblProspectSkill)
To add, I've created a form (frmPosition) that lists the specific skills set for each position.
I'm not sure how to get this subform (fsubProspectSkill) to auto populate with the specified skill set from frmPosition.
I have a "Main" form called frmProjects that sports multiple tabs. One of those tabs is labelled "Milestones", into which I inserted a datasheet subform called frmSubMilestones. The table that feeds the subform is tblMilestones. I established the parent / child relationship between frmProject and frmSubMilestones, and everything is working just fine...
To summarize: frmProject as main form -> Milestones Tab on main form -> frmSubMilestones as datasheet subform on the Milestones Tab (there are other tabs that are not subforms).
I have been asked, for each milestone in the frmSubMilestones subform's datasheet, to capture the number of days spent by employees on a monthly basis. The Milestones table and the PersonDays table have a primary key and a foreign key that are similar.
To summarize: frmSubMilestones as subform -> txtAggregatePersonDays as calculated Textbox fetching data from tblPersonDays -> OnClick event -> FormLoad of frmPersonDays as datasheet PopUp form.
DoCmd.FormLoad is supplied with the usual parameters to make the PopUp form appear, filtered on the currently highlighted milestone. Everything works fine so far... well almost.
Problem 1: When I introduce new rows in the frmPersonsDays datasheet, everything seems fine at the surface, BUT the primary key of the calling form (i.e. frmSubMilestones) does not appear in the tblPersonDays table; this is normal because there is no form-based parent / child relationship between the two forms. As one might expect, I am trying, from frmPersonDays, to get the primary key value from the "parent" frmSubMilestones using the Forms collection. No dice. I surfed and surfed, tried the bang and the dot operators, drank scotch, but nothing worked. I had to add foreing keys manually in tblPersonDays to further my tests. I can't figure out how to reach any control on the calling form, which is a subform.
Problem 2: The calculated txtAggregatePersonDays on the frmSubMilestones works wonders for existing data in tblPersonDays. However, when I introduce new rows in the PopUp form, I also realized that the calculated Textbox in frmSubMilestones is not updated when I close the frmPersonDays PopUp. I have to close the PopUp form and move the cursor in the Main form (frmProjects) to refresh its associated milestones.
Hello All,I am new to Access and VB and have gained some very very useful tips from this site whilst compiling my new project.I have a question which I have been unable to find anywhere here.I have two tables at the moment. One is the main table from which my form is created. My second table is a list of registrations and the corresponding number of current hours accrued by the registration (eg ABC has 512 hours used)I query the rego table on my main form to give me a listbox so that for each new record, the user can select the rego, and the starting hours are automatically filled in the 'Start hours' field on the form (using an after update event to set the hours after the rego is selected), which is bound to the 'Start Hours' Field on the main table, so that when it is saved, the info saves to my main table.When the user returns, they then enter their Finish hours, and this finish hours is then written to the rego table, so that next time the rego is selected the start hours is the same number as the finish hours from the last time the item was used.Now for the problem. Users can fill out some parts of the form, and take it before the finishing hours are entered for the previous record. Therefore, when they return to enter their finishing hours, the starting hours hasn't updated on the form, and it doesn't change unless they reselect the rego from the list box to trigger the after update event.Is there any way, (I have tried, Me.Refresh, Requery etc) I can get the after update event to fire in the current form automatically, ie without having to reselect the same rego again? Is there a way to just refresh the rego field so that it thinks that it has updated and triggers the after update?I may have now made it clear as mud, but this is my first post so any help would be very much appreciated. I can elaborate on any problems if needs be.Thanks in advance for your help!
I have a parent form which has a yes/no checkbox in the form's record source. Then in that parent form I have a sub-form. If NO records exist in the sub-form I want the checkbox to be UN checked. If records DO exist in the sub-form, I want the checkbox to be CHECKED.
But I want this to happen as records are added or deleted from the sub-form. In other words, if the parent form is opened and no records exist in the subform then the checkbox should be unchecked. But as soon as the first record has been entered in the subform, the checkbox on the parent form should be checked. Likewise, as soon as the last record has been revoved from the sub-form, the checkbox on the parent form should be unchecked.
I have combo box that lists data from another form (frmCity) . If the required data in not in the list then frmCity is opened, a new record is entered and form closed. The combo box in the first form (which has remained open) does not show the new entry unless it is closed and re-opened. How can I get the new record to show without closing and reopening?
I have forms that show commitments by Client, by Cost Centre, by Provider etc.
If I add new commitments or edit commitments it is done through the Commitments by Client form, as all other forms lead back to this one.
To create a new or edit an existing commitment, it is done through a Commitment Form, which goes into a query (query A)which does all the calculations. My client form has subforms based on Query A, however my other forms (commitments by Cost Centre etc) have subforms which have querys that are based on Query A . I hope that made sense.
My problem is that If I edit a commitment, the client form and subforms refrlect the changes imediately, even though they are open and I can see them changing when I change the commitments. However the other ones don't unless I close them and re-open them.
My navigation within the database is based on once a form has been opened it is set to be invisible untill called on again (i.e. visible = False).
How to requery all the forms without having to close them.
I have a form that has a check box on it. For some reason the check box is not being checked when an update query is run prior to load. I issued the 'Me.Requery' command after the update query is run (via 'On Load' and 'On Open' in the 'Event' property . . . neither worked) of the form. Is this the correct way to refresh a form after an update query is run ?
How do you refresh all of the data on a form when the tables that are the source for dlookup fields on the form are changed by command buttons on the form?
I have an Access 2010 database with a form that allows me to input data which is saved into two tables (i.e. Orders and OrderDetails). I use a simple select query to bind the form to the tables.
When the form loads it asks for an order number, which it uses to pull details from the Orders table and auto-fill some fields on the form (these fields are not enabled as they are predefined, such as the order date).
So, when the order number is entered my VBA code does a Form.Refresh, which then breaks the code with the Run-time error 3022 - "The changes you requested to the table were not successful yada yada.." (I'm sure you all know the one)...
I have checked that there are no duplicated keys in my tables, I have checked that what should be indexed, is indexed. I have done a compact and repair on the database, and even created a new database and imported all the tables (used new data). Still get the same issue.
