Forms :: Refresh Image After Text Box Control Updated?
Oct 14, 2013
One of the fields in my database stores a path of an image that I want to display on my form. I used the following code in the "On Current" event of my form to achieve this effect:
Private Sub Form_Current()
If IsNull(Me.text1) Then
Me.ImgPic.Picture = "C:UsersharrDesktopCupCake.jpg"
Else
Me.ImgPic.Picture = Me.text1
End If
End Sub
It works great with the exception that the image doesn't update when the path is changed. If I update the path, I have to navigate to the next record and then back again in order to see the new image. I've tried a couple of things to try to requery the image after the text control is updated, but so far none have worked. This is my most recent attempt on the after update event of my text box:
Code:
Private Sub text1_AfterUpdate()
Me!ImgPic.Requery
End Sub
How I can refresh the image after the text box control is updated?
I have a text box [txtTrafficValue] that is a calculated field of two short times. I want an image to be visible if the value is >= 0.0104 (15 minutes). I have in the after update of the field:
if me.txtTrafficValue >= 0.0104 Then Me.imgWarning.visible = true Else Me.imgWarning.visible = false End if
but when the field does the calculation and updates the image is not appearing.
I have a form called Add New Delegation, i have combo box of Institution names on the main form and a subform for Agreements discussed. with a combo box called agreements. I successfully cascaded the combo boxes so that the agreements discussed on the subform are filtered by their respective institutions on the main form. However i am unable to refresh the list each time a new institution is selected as the Macro will not allow me to requery a control on the mainform from the subform..
I have an Image control on a form which I want to examine programatically. It seems there used to be a way of doing it using Point and PSet from info I have seen online. Is this contained in any of the libraries available under References in Access and if so which one...
I have a subform based on a query. That query contains a couple of calculations that end up in textboxes on the subform. The problem is that the calculations require me to enter 2 dates that are on the subform. If these are not entered before the calculation is performed I get a "Cannot update record" error message and then #error in both Lease cost and Discount Cost textboxes.
Hi all , Can anyone tell me about how to embedd image in image control using imagelist. I added the 5 images in imagelist at design time and added the following code. image.picture=imagelist.listimages(1).picture but iam getting error.error no :2110,cannot open the file . thank u, Siva
I have a linked table in ms access and it has a column as details. in ms access when i click on this button i will go to another form. i want to assign a picture (for opening a form) to this column but i don't know how i have to do this. my form opens as a datasheet view.
I have a continuous subform which queries a table of attachments. I'm using Access 2007 but not using the Attachment datatype; this DB will grow considerably and I don't want to waste precious space by filling it with bulky files. So instead, I have code which makes a copy of the attachment and adds the hyperlink (to the copy) to the table instead.
Now - I want to add a control to the subform to display an icon / image reflecting the file type of the attachment (Word doc, Excel s/s, PDF etc.)
But not sure how to go about it.
I was thinking I could use FileSystemObject.GetFileExtension at the point in the code where the attachment is added, and add a new field to my attachments table (i.e. translate "*.xls*" to "Excel", etc.) Then store / embed a handful of images for the core types I would expect and use an image control on the subform to display the image based on the value of that field.
But is that even possible / feasible?
Or, is there a handy API which can retrieve the icon associated with a file type based on what has been installed on the local machine (even if there is, there's still the problem of setting up the image control to display the appropriate icon specific to each record...)
Or, is there another control available which would be better suited to something like this than an Image control?
I have created 3 forms, 1 of which will update the sum of 5 text boxes immediately after numbers are entered in, while on the other 2 forms I had to create a refresh button so that the numbers will add up. The properties in all of the forms and the text boxes seem to be the exact same.
I want to show an subform where in I would like to display images,txt,xlsx that are stored in a directory as icons which when clciked would open the respective files.The info related to the images are stored in t_CustomerFiles.
Record ID, CustomerID, DestinationPath,EventFileName, 1, A, C:UsersTestDesktopCustFiles, CustA1.jpg 2, A, C:UsersTestDesktopCustFiles, CustA2.xlsx 3, B, C:UsersTestDesktopCustFiles, CustB1.txt 4, C, C:UsersTestDesktopCustFiles, CustC1.jpg 5, C, C:UsersTestDesktopCustFiles, CustC2.jpg.
I would like to show them on a continusous sub form .. I am using image control by setting its control source property but it does not seem to work..Do I need something else for the xlsx and txt files..
I am going crazy!!. I want to use .jpg images in my Access Form (Access 2003). All the tutorials and forums talk about using Image Control to display .jpg images. But I can't find the Image Control on the toolBox??? Where is the Image Control?? I am currently useing Unbound Image Control but that only allows me to display .bmp images.
I'm trying to add a control to my form that I don't know how to do.
On my form, I want the user to be able to click a button which will open up the standard file open dialog box. The user then will be able to browse through the appropriate directory and select an image file which will be saved on that specific record.
Attached is a strip down database as an example.
How can I do this? Any help would be greatly appreciated - I'm trying to do this for my work.
I have a global function which I have hooked onto the onClick event of controls. Currently I am using commandButtons as my control of choice. In my function I can then reference Forms.ActiveControl which is no problem.
However, for lots of reasons I really need to use Image controls. Now, my problem. Image Controls have an Onclick Event, but they do not get focus so the Forms.ActiveControl will not work.
How can I identify the image control that has generated the click event if the control itself does not get focus and so cannot be referenced by ActiveControl? Working on a possibly work around, but could do with the best brains in Access on the case!
Essentially I have a form_A with several tab's and then one list control box in each of those tabs. At present if you double click on any item within the control boxes your taken to another form_B with info about that item and when you close that from down again if refreshes form_A.
Is it possible to only refresh the specific list control box that is active instead of refreshing the whole form ?
In above example the criteria is based on [ProductID] on a form.Is it possible to change it, so criteria is based on a value from a specific query, i.e. similar as above?I have tried something like this, but it doesn't work:
I have a database that was built by some users, long before I came to my current job location (oh yes, one of those fun issues), and have run into an error that is involving a 3rd party tool, and is tough to duplicate.
There is an ocx control named "Kodak Image Thumbnail control" the path is C:winntsystem32ImgThumb32.ocx.
This is an active x control, that on the double click event, opens up the correct corresponding .pdf file. It works correct for me, on my machine. It works correctly for 3 other people on their own machines. When we had a user it worked correctly log into a user who it does not work correctly, it then worked correctly for them (appears to be user rights, and not machine specific). It does not work correctly for another 2-4 users (not sure the exact number).
But, the rights were gone over with a fine tooth comb, and nothing was found different from each user.
What is weird, is how the error occurs. There are 59 records in the database, with a linking .pdf file displayed in this .ocx control. For those users in which this does not work, the first two records open the .pdf correctly. After this (records 3 to 59) they receive the following error:
"Microsoft Access can't open the file containing the OLE object.
- You may have specified an invalid file name or an invalid unit of data (such as a range of cells from a worksheet) when the file for the OLE object. - The file you specified may not be available because it's locked by another user or you don't have permission to use it.
Try one of the following: - Make sure the file is available and that you used the correct file name. - Check the OLE server's documentation for information about the syntax to use when specifiying an OLE object's data."
[OK]
Since this is a third party tool, that I have never used, and do not even have on my machine (yet it works correctly for me) I am not sure what else I can do to track down the error. I just wanted to see if anyone else has run into this error, and if so how they had fixed it.
I know everyone is going to say DONT PUT IMAGES IN YOUR DB< PUT LINKS TO THEM IN!
I am not at liberty to change the structure of what my boss wants, he wants the images stored in the DB so that is what I am giving him.
My problem is this: I have a single form for entering data into my Table, and I want to add a control that will let the User Browse for the right image, and them add that image chosen into the DB with maybe an upload button or something.
Now, if it is VERY VERY poor design to do it this way, and it is SOO much better to do the link to image way, if you could please detail how it works in both ways, I may be able to talk my boss into changing. My problem is I am not very good at this DB Designing and such, and have no experience using OLE type fields.
I have an unbound form which has 2 unbound combo boxes on it, both based on the same table, but I have used a query for each one to created the sort order, one alphabetically by item name (cmbA) and the other numerically by the item number (cmbN) . I also have a text field (ID) upon which is based a report when the user clicks a button. Currently the text box (ID) has a control source of column 1 of cmbA and I have the report working perfectly if one selects from the name combo box (cmbA) What I want to do is allow the user to select from cmbN and have the control source of the ID text box equal the number the selected so the report button will work then also.
I have tried to set the control source after update of cmbN but all that does is blank out the ID text box. I have not done this before so I am sure I have done it incorrectly. I tried again this morning using me.ID.ControlSource = Me.cmbN and stepping through the code shows that the cmbN ControlSource is equal to ID but I can't make the code that follows use the results.
I currently have a DLookUp formula in a Text Box Control Source. It returns the value I am looking for, however, the value will not add to the record. I have tried putting the DLookUp formula in the Default Property, but it is not working.It is a multi-criteria DLookUp, where the criteria is entered into the form.
=DLookUp("[TBA CUSIPs]","[TBA CUSIPs]","[Settlement Month]=" & [Forms]![Enter Trade]![Settlement Month Text Box] & " AND [Coupon]=" & [Forms]![Enter Trade]![Coupon Text Box] & " AND [Instrument] = '" & [Forms]![Enter Trade]![Instrument Combo Box] & "'")
I want the calendar to show the date in the field [Next Payment Due] - whenever this value changes, the calendar date should change accordingly.
I want the calendar to be assigned to a text box (txtCalDate), so this would also contain the date of [Next Payment Due].
However, If the calendar date is changed (on the calendar), I want txtCalDate to show this date, but [Next Payment Due] to stay as it's original value. Next Payment Due can only change the value, but not be changed itself.
So I presume VBA would be needed to say when [Next Payment Due] is changed, make calendar this date. And then to simply assign the calendar to txtCalDate so if calendar is changed, this will change with the new date.
My form is based on a table (SOP TBL) and has several text boxes with control sources of the records in the table. I need to add a criteria to one field (SOP Number) so that only current versions of the number show up. I have the SQL for a query that I use in another form for a combo box as shown below. What this criteria does is find the version number which is the last 2 digits of the SOP Number and displays only that record for the SOP Number in the combo box. How can I apply this code to the text box with the control source directly from the table so only the current records are displayed on the form?
Code: In (select max([SOP Number]) from [SOP TBL] group by left([SOP Number], len([SOP Number]) - 2))
I am working with textbox [DispCD] (a date field) on form [Contract]. There is a dropdown on combobox [Searchbox] for selecting the desired record. I am writing VBA in the [Searchbox] OnChange event. The control source for [DispCD] would normally be "=Searchbox.column(11)". If "column(11)" has a date, I want [DispCD] to show that date and then be locked. If "column(11)" does NOT have a date, I want [DispCD] to allow entry of a date with the date picker showing. I've tried to assign the control source to [DispCD] with this:
CSVal = Format(Forms![Contract]!SearchBox.Column(11), "ddd m/d/yyyy") (this works) If CSVal = "" Then _ Forms![Contract]!DispCD.countrolsource = "=SearchBox.Column(11)"
I get "Object doesn't support this property or method" error.
I've searched a lot and couldn't find an answer to my problem.
I want to have a field in my form that allow me to paste an image from the clipboard to, for example, a Paint field. Then, I want to save that image to a file on a specific folder in my computer via VB.
The reason for this is that I don't want to ask the user to open paint by himself and save the file, probably in the wrong location and with the wrong name.
The first approach was creating an OLE Object directly from the Insert menu and that worked partially. It allowed me to paste the image but there wasn't a way to save it to a file, neither a method for that. It was an incrusted object, and I think that is the reason for that.
Then I tried to create the object by myself via VB, with the instructions:
Dim objeto_perfil As Object Set objeto_perfil = CreateObject("Paint.Picture") 'IT STOPS HERE
And with the variation:
Dim objeto_perfil As Object Set objeto_perfil = CreateObject("Paint") 'IT STOPS HERE
And neither worked. The error message says it lacks an object.
Then I followed an example from msdn that used a bound frame (view here (http://msdn.microsoft.com/library/default.asp?url=/library/en-us/vbaac11/html/acproClass_HV05187062.asp)). The code is:
visor_perfil.Class = "Paint.Picture" ' Set class name. ' Specify type of object. visor_perfil.OLETypeAllowed = acOLELinked ' Specify source file. visor_perfil.SourceDoc = "C:RealPathimage.BMP" ' Create linked object. visor_perfil.Action = acOLECreateLink 'IT STOPS HERE ' Adjust control size. visor_perfil.SizeMode = acOLESizeZoom
It stops in the action assignation, an says "error 2753 there was an error trying to communicate with the OLE server".
I google a lot and could find much of the Paint.Picture Class.
Anyone has any ideas to overcome this issue? What am I doing wrong?
On open I change the Picture property of an image control to another image. I do it 2 places. Access crashes on the first change or on the second. In about 50 % of the cases.
