I have combo box that lists data from another form (frmCity) . If the required data in not in the list then frmCity is opened, a new record is entered and form closed. The combo box in the first form (which has remained open) does not show the new entry unless it is closed and re-opened. How can I get the new record to show without closing and reopening?
I have a Main form with a combo box that pulls names from a table. Alongside the combo box is a command button that opens a form which allows the user to edit the names in the table.
The problem: When a user edits a name and closes the edit form, the edit is not immediately displayed in the combo box. However, when the Main form is closed and reopened, the edit is properly displayed. Can I somehow refresh the combo box in the On Close event of the edit form?
HI basically i have a form which dislays records in a continous list, then an add button which adds records to the list. to view the newly added records you have to close the form and open it again.
I have inserted a refresh button but what im after instead is when i close the 'add form' it refreshes the list form. Below is the code for the refresh button could someone tell me what i need to add/change to make it refresh a particular form on close?
Private Sub Command45_Click() On Error GoTo Err_Command45_Click
I have forms that show commitments by Client, by Cost Centre, by Provider etc.
If I add new commitments or edit commitments it is done through the Commitments by Client form, as all other forms lead back to this one.
To create a new or edit an existing commitment, it is done through a Commitment Form, which goes into a query (query A)which does all the calculations. My client form has subforms based on Query A, however my other forms (commitments by Cost Centre etc) have subforms which have querys that are based on Query A . I hope that made sense.
My problem is that If I edit a commitment, the client form and subforms refrlect the changes imediately, even though they are open and I can see them changing when I change the commitments. However the other ones don't unless I close them and re-open them.
My navigation within the database is based on once a form has been opened it is set to be invisible untill called on again (i.e. visible = False).
How to requery all the forms without having to close them.
I have a form that has a check box on it. For some reason the check box is not being checked when an update query is run prior to load. I issued the 'Me.Requery' command after the update query is run (via 'On Load' and 'On Open' in the 'Event' property . . . neither worked) of the form. Is this the correct way to refresh a form after an update query is run ?
How do you refresh all of the data on a form when the tables that are the source for dlookup fields on the form are changed by command buttons on the form?
I have an Access 2010 database with a form that allows me to input data which is saved into two tables (i.e. Orders and OrderDetails). I use a simple select query to bind the form to the tables.
When the form loads it asks for an order number, which it uses to pull details from the Orders table and auto-fill some fields on the form (these fields are not enabled as they are predefined, such as the order date).
So, when the order number is entered my VBA code does a Form.Refresh, which then breaks the code with the Run-time error 3022 - "The changes you requested to the table were not successful yada yada.." (I'm sure you all know the one)...
I have checked that there are no duplicated keys in my tables, I have checked that what should be indexed, is indexed. I have done a compact and repair on the database, and even created a new database and imported all the tables (used new data). Still get the same issue.
When opened it displays all records (no selection yet).
I put would like to put 2 buttons to filter records (Male/Female).
I'm thinking of 2 possible options:
1-on click run a script that will close current form, then reopen it with selection criteria 2-directly apply a filter on the current form that would automatically refresh itself with the right records
Another (heavy, inelegant?) solution would be to create duplicates of this form. they would be loaded from separate queries that select the right records in either choice.
Form 1 - Data entry for a new project Form 2 - Data entry for a task associated with the project in the Form 1
Button on form 1 that opens Form 2.
What I am trying to do:
Use a combobox on Form Two to choose the Project entered into Form 1, so I can capture the Form1 PK as a FK on Form 2.
Here is the problem:
Refreshing the record on the button click so that the new option entered into Form 1 shows up in the combo box on Form 2.
Full disclosure: I'm not much good at VBA so I have been trying to do this by customizing the button macro. I have tried Refresh, and Requery, but I can't seem to get it to update the list in the combo box.
2 questions:
1. How can I get this accomplished? 2. Is there a better way to get this data into the table than what I am trying to do?
I need to refresh listbox field (Total_price) situated on parent form. My sub form is called "Lines_form". I want to sum values of all lines for column "price". Result of calculation I want see in parent form in field "Total_price". My parent form is called "Main_form".
On "price" field settings I used AfterUpdate event : Me.Parent!Total_price.Requery
I see result in parent form, but value isn't saved to table and I can't use it in next calculations.
I need refresh/requery/save patern form. I try this code:
I have a field on a form that is the results of a dlookup to a table.field. I want the value to be updated when I execute a button that is running a macro. How do I do this automatically, and not have to hit the refresh button?
I have a form frmAddNewProject that is a Data Entry form.When you click Add Project on the form, it creates folders and copies files to a location and also creates new record(s) in the ProjectT table with appropriate information.Here is my code:
Code:
Private Sub cmdAdd_Click() Dim FSO As Object Dim FromPath As String Dim ToPath As String Dim FolderPath As String Dim strType As String Dim strYear As String Dim strGPN As String
[code]....
Everything works fine till here. Now I would like to close the form but closing it gives me an additional empty record.
Code:
Dim ctl As Control On Error Resume Next For Each ctl In Me.Controls ctl = ctl.DefaultValue Next Set ctl = Nothing
to remove all values, but then it just adds an empty record.Is there a way to close that form without removing my legitimate new records and without adding empty ones?
I am tying to create a cmd btn called "Report" that when clicked opens a form [quick report] in dialog window. I have that done easy enough. But what I want is if that form [quick report] is open, and you click the same button "Report" for it to then close the form.
I have a simple EXIT command button that runs these macro actions: save record, close form. I also have a SAVE command button that runs this macro action: save record. If a user closes the form without clicking either the EXIT or SAVE command buttons, will the record changes be saved in the datasource table.
I have found from testing that the data is always saved even if the user does not click the EXIT or SAVE buttons, but I wanted to be absolutely certain. Is this correct ?
After creating multiple instances of a form how should they be closed so as to ensure that all of their assets are disposed of and there are no memory leaks? DoCmd.Close seems not to work because it expects a name string which would be the same for all instances of the form.
Since a form's name is a read only property it cannot be modified when the form is created so it doesn't uniquely identify a particular form instance. I've tried setting the form reference to Nothing which appears to work, but I'm not sure whether this is the correct technique and whether it disposes of everything cleanly.
I have been trying to figure out how to make a form refresh after deleting a record in a subform. The code in the combo box that populates the subform works fine. If you select the "Action" of "sign" from the unbound combo box above the subform, it places "Sign" in the the subform and then makes a checkbox on the main form [WillTake] = True.
But when I delete the record by right clicking on the entry, the focus is sent back to the main form so I can refresh the form and thus update the [WillTake] checkbox. I have tried just about everything. I can get the focus to a field on the form, but I cannot figure out how to refresh or requery the form.
The code to transfer focus is on the OnDelete of the subform.
I have two subforms on a "Page"/Tabs. Subform #1 is a continuous form which accepts data about dimensions of a pattern piece. The other subform needs to update its information display each time the last control of the first subform loses focus, because it tells me how much material is required for all pieces of this pattern that are entered.
My first feeble attempt at this was to add the following code to the "Lost Focus" event of the final control on the first subform: Form.Parent.Refresh
This succeeded in forcing the second subform to re-run its calculation.
However, after the recalculation took place, I wasn't able to move to the next record on the first subform. This subform is a continuous form, and I need to be able to add another row of data and then see the second subform change based on the additional information in the first subform.
Test findings showed that when I open a form the data does not update. I added a refresh action after the openform action. If I want to open three forms via the macro, do I need three refresh actions, one after each openform action, or simply a single refresh action that would apply to all three forms.
I have designed a form using the wizard from a table which records transactions for an entity.
I have a Primary Key (auto number), entity id, transaction amount, description and date fields in the table.
I look up the entity using a list box, then populate unbound fields then use CurrentDb.Execute "INSERT INTO in order to save the new record.
When I open the form for use, it automatically changes the entity id of a previously added record to the most recently selected entry in the list box. I am unsure why it does this. It seems to be editing previous records when you change the value of the list box.
I have a bound form that is used to enter company info (address, name, category...etc). When the user closes the form, if Company name, province or category are left blank, I warn them with a message box asking if they want to exit and undo changes, or return to the form to fill in the missing info.
When they choose the option of returning to the form, I get 2 errors. You must enter a value in "tblCompanies.category", and "You can't save the record at this time, do you want to exit without saving?". If I click "No" on the second warning, focus is set to the missing data control and I can continue working.
How can I prevent the record from being saved when I choose to return to the form to fill in the blank records?
Code: Private Sub Form_BeforeUpdate(Cancel As Integer) On Error GoTo Form_BeforeUpdate_Error Dim Response As Integer ' Determine if required fields are populated. If IsNull(Me.txtCompanyName) Then Response = MsgBox("Company name is a required field. Do you wish to discard changes and exit?", vbYesNo,
I have cleared the data out of the database and started testing it to check its usability.I entered in a full record, and flicked back and forth between the records, and everything was looking good.
Then I closed the form, and re-opened it and my record was no longer populating the form fields.I've literally changed nothing bar one field that was changed from number to text.
I have a form called Add New Delegation, i have combo box of Institution names on the main form and a subform for Agreements discussed. with a combo box called agreements. I successfully cascaded the combo boxes so that the agreements discussed on the subform are filtered by their respective institutions on the main form. However i am unable to refresh the list each time a new institution is selected as the Macro will not allow me to requery a control on the mainform from the subform..
Access 2010 doesn't seem to like the last line. It gives me an error saying the form name doesn't following access object naming rules.
Sub update_subform() Dim dbsCurrent As Database Dim qryD As QueryDef Dim strSQL1 As String, strSQL2 As String, strSQL3 As String Dim mytmp As String Dim proc As String, myot As String