Forms: Requery A Subform From Another Form
Apr 18, 2005
I need to requery a subform from a third form and can't seem to get it to work.
frmForm1 has frmAddress as a subform. The button cmdReviseAddress opens the form frmUpdateAddress where all of my validation work is done and the new record is added.
However, the new address is not being displayed in the subform.
If I use the command
Forms![frmTest]![frmAddress].Requery
it works fine.
The problem is that I want to be able to frmAddress on any form, and need to pass the name of the main form (in this case frmForm1) as a variable.
If lsTemp = "frmForm1", the statement
Forms![lsTemp]![frmAddress].Requery (and every variation using brackets and quotes that I can think of) fails.
Any ideas?
Thanks!
View Replies
ADVERTISEMENT
Feb 6, 2014
how do you requery a control on a form pulled from subform? i've tried but it doesnt work
Private Sub Form_AfterUpdate()
[Forms]![Project_Details]![subform].[Form]![Text119].Requery
End Sub
View 6 Replies
View Related
Aug 2, 2013
I am working with 2 forms and a subform.
frmTaskTracker -subfrmInbox (Datasheet View - based on a query)
frmUpdateInboxItem
subfrmInbox displays a summary of tasks on a task list. The user navigates to frmUpdateInboxItem from frmTaskTracker. After updating a record from frmUpdateInboxItem, it is possible that it the record in question will no longer meet the requirements to have it listed on subfrmInbox.
I have attempted to add code to the on close event of frmUpdateInboxItem to requery the sub form on frmTaskTracker but am not getting the syntax correct.
correct my code? Alternatively is there is a more correct way to do this, I'd be happy to learn it.
Code:
Option Compare Database
Private Sub cmdClose_Click()
Me.[frmTasktracker]![subfrmInbox].Requery
DoCmd.Close acForm, "frmUpdateInboxItem"
End Sub
View 5 Replies
View Related
Aug 19, 2013
I tried all sorts of permutations of the requery command but apparently I'm too dense to figure it out.
Form 1
subform 1 > button to open pop up form
subform 2
subform 3
I'm trying to requery a combo box (inside of subform 1) based on a table that is updated from the pop up form.
On pop up form close, what's the correct syntax for re-querying subform 1?
View 2 Replies
View Related
Sep 8, 2014
I have a form called Add New Delegation, i have combo box of Institution names on the main form and a subform for Agreements discussed. with a combo box called agreements. I successfully cascaded the combo boxes so that the agreements discussed on the subform are filtered by their respective institutions on the main form. However i am unable to refresh the list each time a new institution is selected as the Macro will not allow me to requery a control on the mainform from the subform..
View 2 Replies
View Related
Apr 2, 2013
I have a form (frmAddManifest) with a subform (subfrmManifestTransporters).
When creating a new record, I can enter data into frmAddManifest, but the subform doesn't update to link with the record - I presume it's because the record from the main form hasn't been completed yet.
Is there a way to requery the form and/or subform so it stays on the record I was working on, and link the subform properly?
View 4 Replies
View Related
Sep 3, 2013
I have two sub forms on a main form.Subform 1 displays information which comes from a query, filtered using two combo boxes on the same form.The active record on the data sheet has two field values output to hidden text boxes on the form.
These text boxes then provide the values used for the query displayed on the 2nd sub form.When I highlight a new record in subform 1, the text box values change, but the values in sub form 2 do no.Which would be the best method to use to get this to requery?
View 10 Replies
View Related
Jul 26, 2013
All I am trying to do is get a subform to requery after choosing a name from a combobox on the subform itself, thus updating the records on the subform. The main form name is "BasicTestOneF" the subform name is "ICminiBasicF" and the combobox name is "Combo4"
I have the combobox requery on After Update, but I still get the "Enter Parameter Value" popup. I've spent the last hour and a half just trying to get this simple thing to work and have gone through I don't know how many sites and forum posts, tried every combination of VBA code I've found, and I still can't get it to work.
View 14 Replies
View Related
Aug 8, 2014
I have a main form that has two subforms, subform1 and subform2, both connected to the main form. When I enter data into a field in subform1 I want subform2 to requery and update to show the calculated results from the new or changed data in subform1.
I found that if I do a refresh it works when changing the data but not when entering a new line of data in subform1. I tried some code in the after update field of on subform1, but cannot seem to get anything to work.
Me.[subform2].Form.Requery
Does not work. It errors and says it cannot recognize subform2 as a field. I have tried a field name on subform2 but I still got the same error.
View 1 Replies
View Related
Apr 2, 2014
I have a main form that identifies a Client File: frmClientFile (Single Form)
On the main form is a subform for Cases: subfrmCases (Continuous form)
Also on the main form below the Cases subform is a tab control that contains additional subforms to view/update different aspects of a case: subfrmCaseClients (Continuous Form).
The way this operates is that the user first chooses a file using a combobox on frmClientFile.
The subfrmCases is linked to the main form (using the caseFileID) and filters correctly.
The subfrmCaseClients is then linked using some hidden text fields on the main form (using caseFileID, CaseID) and this filters correctly.
On subfrmCaseClients is a combobox (cboClientID) that I need to requery based upon the Case Row selected on subfrmCases.
I have tried numerous combinations of options to force the requery by trying to apply a macro on the following:
OnCurrent, OnSelectionChange, OnChange and AfterUpdate events to no avail.
If I hit F5 to refresh the entire page the combo box gets updated as expected.
How do I get the Requery to work programatically? Is this even possible?
View 2 Replies
View Related
Dec 10, 2013
I have a main form (Frm ViewModel) with a subform (Frm class_attributes) in datasheet-mode based on a Query.Frm ViewModel has two controls, a ComboBox Select Model (presents you with a list of data models ) and a ComboBox Select Class (presents you with a list of Classes selected from a class-table, based on the model-id derived from the Select Model ComboBox). The subform Frm class_attrbutes shows you all class attribute combinations based on the model-id derived from the Select Model ComboBox.After the initial selection of the classes and attributes, the subform Frm class_attribute can be filtered on class by the Select Class ComboBox.
As long as I just switch between models through the Select Model ComboBox, it all works fine. The subform Frm class_attributes is updated (Requery) correctly.The problems start when I filter the subform Frm class_attributes, either through VBA OR by using the GUI filter possibilities of the sub form itself.
Private Sub select_class_AfterUpdate()
[Forms]![Frm ViewModel]![Frm class_attributes].[Form].Filter = "class.object_name ='" & [Forms]![Frm ViewModel]![class_name] & "'"
[Forms]![Frm ViewModel]![Frm class_attributes].[Form].FilterOn = True
The filter works fine, but once youve used it:
- The filter stays active, even when turned off, so when you Requery the subform it reutrns results with the original filter.
- The filter is removed, but now the subform after requery keeps showing the selection of classes & attributes for the model_id where the filter was first set.
I tried all possible combinations of FilterOn = False and .Requery but it doesnt solve it. I tried reassigning the RecordSource but since the underlying SQL is extensive (a few joins) Access seems to have a problem with this
[Forms]![Frm ViewModel TST]![Frm class_attributes].RecordSource = "SELECT [class.hierarchy],
[class.object_name], [class.technical_name], [class.definition], [parent_class.object_name]
AS ParentClassName, [parent_class.level], [A.AttributeName], [A.AttributeTechnicalName],
[A.AttributeDefinition], [A.AttributeType], [A.AttributeTypeDescription] FROM [parent_class]
[Code] .....
I tried making the sub-form a bound form by manually linking the masterfield to the Select Class ComboBox..I played around with the On-Focus and OnCurrent-events
View 4 Replies
View Related
Nov 8, 2014
I'm trying to execute some lines of code right after deleting a record in a subform, with a right click on the row I want to delete (the idea is that if a record is deleted the other ones should be updated by module1.tblUpdateLatestDocuments).
I've tried putting this code into the events On Delete and After Del Confirm of the subform, none of that worked.
Code:
Option Compare Database
Private Sub Form_AfterDelConfirm(Status As Integer)
Call Module1.tblUpdateLatestDocuments
Me.Requery
End Sub
Private Sub Form_Delete(Cancel As Integer)
Call Module1.tblUpdateLatestDocuments
Me.Requery
End Sub
Aren't there any events that I could use right AFTER the record has been deleted?
View 10 Replies
View Related
Aug 3, 2014
I have my main form which is f_main.
On there is a Subform called subfrmFront and that has a source object of the form f_front
A button on f_main opens up a popup. In this popup, the fields I am updating all relate to the same records that are being displayed in the subform. Everything updates OK in the popup (i.e I can see in the table that the updated information is in there), but the subform back on f_main still has the old data in it.
I need to requery that subform to show the new data I just inputted.
If I close f_main and re-open it, the latest data is in there, but surely there is a way to make sure it updates on the close of the popup form.
View 14 Replies
View Related
May 8, 2014
I have a main form with a couple of tabs, forms and subforms (see attachment). The problem is that when I click on one of the blue record navigators, I want the right subform to requery. I can't get that to function properly.
Until now I'm just using the Macro Builder and little to no VBA. There is a function Requery in the MB, but I keep getting error messages that the object doesn't exist or nothing happens at all.
I've read the page on Access mvps about linking to forms, but I'm still doing something wrong.
When I used some VB like:
Me.Parent!frmStagesPerLeerling2.Form.Requery
it did work, but I an into problems with setting the visibility of the navigation buttons (they should only show when there is more then one record in that subform).
View 3 Replies
View Related
Aug 11, 2005
Hi. Having a bit of a problem getting a subform to requery/refresh after running a query from a seperate form. The seperate form is acting as a 'search form' and running query qSearch.
I've tried various things (requery the form, subform etc) but here is the code I'm currently using:
Private Sub RunqSearch_Click()
DoCmd.OpenForm "Papers"
Forms.Papers.RecordSource = "qSearch"
Forms.Papers!Authors.Form.RecordSource = "qSearch"
Forms.Papers!Authors.Form!AuthorName.ControlSource = "qSearch.AuthorName"
Forms.Papers!Authors.Form.Requery
Forms.Papers.Requery
DoCmd.Close acForm, Me.Name
End Sub
The main form is requerying fine, but the subform isn't. Any help would be appreciated. Thanks
View 4 Replies
View Related
Jun 26, 2013
I have a subform in a tab within a mainform. Within the tab there is a button to open a form to delete/add data to the subform. So upon closing this pop up form I want to update the subform to show what has been deleted or added, I have tried the various things to requery the subform but none of it seems to work, here is what I have tried;
Code:
Forms!frm_Capex_Submission!frm_CapexSignatures.Requery
I assumed this would work but evidently not...
I have also tried;
Code:
Forms!frm_Capex_Submission!frm_CapexSignatures.Form.Requery
and;
Code:
Forms!frm_Capex_Submission!frm_CapexSignatures.refresh
View 2 Replies
View Related
Apr 3, 2014
I have a form with two subforms. One subform is a datasheet that pulls data from a temp table. During the other subforms Form_Current, the temp table is emptied (DoCmd.RunSQL "Delete from tblAddRefs"), reloaded with data relevent to the current record, and requeried (Forms("frmEDFP").Controls("tblAddRefs subform").Requery). This works like I want it to...
With the exception of the initial load of the main form. The subform based on a table shows (#Deleted) instead of data. if I step through the code, I can see that the temp table is emptied and repopulated by the time I try to requery the subform. This is still happening during the Form_Current of the other subform, which is successfully running on main form load.
If I requery (Forms("frmEDFP").Controls("tblAddRefs subform").Requery) using a button on the main form once it is loaded, the #deleted data is correctly is replaced by regular data, so it's like the requery in the Form_Current event isn't doing anything during load.
View 2 Replies
View Related
Oct 5, 2013
i have a main form with three sub forms on it. when i update subform 1 i want subform 2 and 3 to update..currently i have an after update event in a combo box subform 1
Code:
[Forms]![FRMDATESUM]![frmHOURSUMnowork].Requery
[Forms]![FRMDATESUM]![frmHOURSUM].Requery
when the user updates the combobox in subform one nothing happens to the other subforms until close and reopen main form
View 2 Replies
View Related
Jan 30, 2015
New to access...just build a form, in which there are combo boxes....cascading of boxes was done.
Now the problem is I want afterupdate function to get activated when user changes the value of one combo....for which I have created a code in code builder... see the code... I think I am making a mistake in writing the code to requery...
View 5 Replies
View Related
Jul 11, 2015
How do I requery the list box in the form after the combobox is updated? the name of the combo box is txtFilterClassName.
View 3 Replies
View Related
Jul 21, 2013
I have a main form "FrmTimesheetEdit" that I open in edit mode to review data in a query that uses two tables TblEmployee and TblTimeSheet. The TblEmployee has two fields called EmployeeID, and Employee. The Tbltimesheet table has a field "Weekendingdate" and "EmployeeID".Prior to loading the mainform I launch a form "frmEmployeeReportRange" that allows me to specify via combo box the Employee I am interested in and also the time periods I am interested in being "Beginningdate" and "EndingDate" These in turn are criteria for my query that supplies data to the main form "FrmTimesheetEdit" Everything seems to work ok.
However the first time I open the main form It open a form/window saying "Enter parameter Value" for EmployeeId, BeginningDate and Ending date respectively. Then the subform loads "frmEmployeeReportRange" which allows me to specify Employee plus beginning and ending dates. I select Employee from the combo box say "Emp1" and specify Beginning and Ending dates of 1-Jun-2013 and 30-Jun-2013. I then make the form invisible and the mainform opens up.I do this but get no records. If I close the main form "FrmTimesheetEdit" and reopen it the subform pops up as expected. It is preloaded with the data I entered the first time i.e. Emp1 plus 1-Jun-2013 and 30-Jun-13...If I leave the dates the same but select the next employee "Emp2" and them make the form invisible the mainform opens in edit mode as expected but with the records and dates specified for Emp1.
Bottom line it would appear that although the filter data is specified for the query that feeds the main form it is not requerying prior to opening the form. I have tried having the "frmEmployeeReportRange" launched as a VBA event on each of 'On Open' , 'On Load' and 'On Current' but no matter where I put it the results are the same in that the mainform is not requerying the data prior to opening.
View 5 Replies
View Related
Oct 2, 2013
I have a split form that was not made by wizard. On the form part I have a combobox that is unbound to the form data set. The combobox has a query row source that is based on the current row selected. I want the combobox to have an up-to-date result based on which row is selected.
If I set the combobox to requery in the form_current event then I get what I want. I don't want to put up with the little delay that is generated every time a user changes rows because of the requery, though. I only want the requery to happen when they use the drop-down menu.
I have the requery in the gotfocus event of the combobox on the form. I mostly get what I want this way, however if they select an item in the drop-down list, then choose a new record in the datasheet, then try to use the combobox again, the combobox is not refreshed (because it never lost focus?).
To get around this, I've tried to setfocus to something on the form in the on_current event, but access gives me an error: 'Access can't move focus to the control btn_Refresh'.How can I get the combo to requery only when users are about to use it?
View 4 Replies
View Related
Sep 17, 2014
I have a form that shows a companies engagement with our company. If someone wants to edit the details of that company (address phone number etc...), they click the "edit" button, which then opens a form where edits can be performed.
After the edits are done, the user clicks a save and close button which runs docmd.runcommand acCmdSaveRecord, and returns to the companies engagement form.
When I return to the company engagement form, I would like to see the companies information reflect the changes that I just made. Currently, I can only do this by exiting the form and re-opening. I have tried using Me.Requery in the OnGotFocus, Activate and Current events to no avail.
I should mention that I have a company combo box with multiple columns that are used to display address, postal code, etc... in textboxes on the same form.
View 1 Replies
View Related
Feb 4, 2014
I new to this form and to access and hope to find an answer to my problem.
I have 3 tables and 3 forms
Table 1 - Form 1 --- Psych Patients
Table 2 - Form 2 --- Med patients.
Table 3 - Form 3 --- Primary Doctors.
Each form has a combo box with a list of Primary Doctors. If doctor is not in the list then we have the option to enter new information via Pop up form (form 3). At close the Pop up form requerys the cbo box.
Is there a way to use Form 3 (pop-up form) to re-query both forms at the same time even if only one of the forms is open?
FYI, Table 1 and Table 2 contain different information and the only thing both table have in common is the primary doctors.
As of now my code in the pop Up is:
Private Sub Form3_Close ()
Form_Form1!cboPhy.Requery
End Sub
Is the only alternative to create another form for the physicians and use it for Form 2?
View 4 Replies
View Related
Jun 21, 2007
Hi,
I want to requery a SubForm using the on Click event of a combobox that is located on the main form. I used this code below, but it does not work.
Forms![frmSite]![subRoadsConstructionConsent].Requery
Any suggestions please,
B
View 6 Replies
View Related
Jan 26, 2005
I'm trying to requry a sub form based either or both text boxes. I need help with the code. I'm trying to rewrite something from a sample but can't seem to get it to use the criteria. It does requery though.
Private Sub cmdSearch_Click()
Dim sCriteria As String
sCriteria = "WHERE 1=1 "
If Me![Search] <> "" Then
sCriteria = sCriteria & " AND MedicalRecordsUpdating.SerialNumber """ & Search & """"
End If
If Me![SearchEvent] <> "" Then
sCriteria = sCriteria & " AND MedicalRecordsUpdating.Event """ & SearchEvent & """"
End If
Forms![RecordManagment]![FrmMedicalRecordsUpdating].Form.Requery
End Sub
Can some one steer me in the right direction
View 5 Replies
View Related
