Forms :: Requery Not Working In A Form With Combo Boxes

Jan 30, 2015

New to access...just build a form, in which there are combo boxes....cascading of boxes was done.

Now the problem is I want afterupdate function to get activated when user changes the value of one combo....for which I have created a code in code builder... see the code... I think I am making a mistake in writing the code to requery...

View Replies


ADVERTISEMENT

Queries :: Query By Form With Check Boxes / Combo Boxes Not Working

Mar 25, 2013

Attached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)

View 6 Replies View Related

Forms :: Cascading Combo Boxes Don't Show Control Source Value Until Requery

Dec 31, 2013

I have a set of cascading combo boxes. When a value is selected in Cat 1 ID, it narrows down the selections in Cat 2 ID which narrows down the selections in Cat 3 ID.

However, the values don't show up for columns Cat 2 ID or Cat 3 ID until I enter the row. Then I have it set to requery the fields because the underlying data isn't populated. But then when I leave the row, the values go away.

Why doesn't it show the underlying value from the table? Each column is bound to a field in a table - I would assume that the recorded value would show up. Did I miss something easy?

I've attached a picture of exactly what I mean.

View 2 Replies View Related

Forms :: Cascading Combo Boxes Not Working In Subform

Nov 28, 2014

I have a cascading combo box working fabulously in a form. However when I embed that form into another form, the cascading combo boxes quit working. After doing some searching around on the web I think my issue is either in the query that the dependent combo box references and/or in the "after update event procedure" but I just can't seem to figure out the exact changes to make to my database. Details:

Tables with data for combo boxes:LOOKUP TABLE - Veg Species - Species Type,
LOOKUP TABLE - Veg Species - Species Name.
Related together based on common field: SpeciesType

[code]...

When the form with the combo boxes is embedded as above, I can select the species type from the dropdown but when I try to select the species common name value I am asked to

"enter parameter value - Forms!SUBFORM2a - Enter Specific Veg Info!cmbSpecies_Type".

View 5 Replies View Related

Combo Boxes Stop Working After Returning To Form

Dec 1, 2005

Hello all,

I have combo boxes populated with all values in a particular field, then shunt the form onto that record (standard combo box for selecting records from a list in other words).

Problem is, these boxes seem to stop working if I leave the form for another and then return to it.

Here's the code Access puts behind:

-----------
Set SerialRS = Me.Recordset.Clone
SerialRS.FindFirst "[Serial Number] = '" & Me![Combo60] & "'"
If Not SerialRS.EOF Then Me.Bookmark = SerialRS.Bookmark
-----------

The form may be opened and closed via other processes (although never unloaded), but when I come back to it these combo boxes always stop working! Why?

View 3 Replies View Related

Forms :: Search Form Using Both Combo Boxes And Check Boxes

Jun 5, 2014

I am trying to make a search option in my form header. Right now I have two unbound combo boxes (CboAccountsfilter and cboCourseName) that I can use to filter my records. Currently, I can use the drop down for CboAccountsfilter and a list of accounts will appear. When I select one, the corresponding Course Names will appear in cboCourseName. This works fine...Code below. I would like to take the filtering a step farther and add checkboxes to filter the data. I my form, there currently exist several check boxes (yes/no)...(Priority, Rep Top Target, Manager Top Target, ect). I would like to have the option to use a check box to filter. I.E if I had a checkbox in my header called PriorityFilter, if checked it would only bring up those records that met the two combo boxes criteria and was a priority.

Below is the code I have so far...it doesnt have anything for the checkbox because I am at a lost of how to get started.

Private Sub CboAccountsfilter_Change()
Me.Requery
Me.cboCourseName.Requery
Me.Check178.Requery
End Sub

[code]...

View 1 Replies View Related

Forms :: Requery List Box In The Form After Combo Box Updated

Jul 11, 2015

How do I requery the list box in the form after the combobox is updated? the name of the combo box is txtFilterClassName.

View 3 Replies View Related

Combo Boxes Not Working As They Should?

Jun 25, 2004



I have a main form with two combo boxes on which are linked if you select from the first cbo it filter the second. I also have subform that has a combo box on which is filtered by the second cbo on the main form. All works lovely when adding a new record BUT when I move to another record the cbo entries in the subform are not there, there are saving to the table are all the other data is showing just not the combo box entries - to get round this I have to reselect from the second cbo click into the subform and refresh and then they appear but this isn't how it's meant to work and I'd have to do this on every record but it then resets the previous one

I think I'm going mad!

Any help would be great

View 12 Replies View Related

Modules & VBA :: Subform Requery Not Working On Form Open

Apr 3, 2014

I have a form with two subforms. One subform is a datasheet that pulls data from a temp table. During the other subforms Form_Current, the temp table is emptied (DoCmd.RunSQL "Delete from tblAddRefs"), reloaded with data relevent to the current record, and requeried (Forms("frmEDFP").Controls("tblAddRefs subform").Requery). This works like I want it to...

With the exception of the initial load of the main form. The subform based on a table shows (#Deleted) instead of data. if I step through the code, I can see that the temp table is emptied and repopulated by the time I try to requery the subform. This is still happening during the Form_Current of the other subform, which is successfully running on main form load.

If I requery (Forms("frmEDFP").Controls("tblAddRefs subform").Requery) using a button on the main form once it is loaded, the #deleted data is correctly is replaced by regular data, so it's like the requery in the Form_Current event isn't doing anything during load.

View 2 Replies View Related

Forms :: Combo Box - Search Function Not Working Within Form

Jul 23, 2015

I recently created a database to be used to store incoming invoices. We have 4 suppliers which supply the same material and wanted each supplier to have its own database.

I began by making a database which included all the key tables, forms, queries and functions I would need to then save 4 copies, one for each supplier. This just meant I would not have to repeat the process for each individual supplier.

The problem is all my data is external and upon importing it into the database it has made the search function (combo box) not return results.

I believe this is because:
1) The form was created before the records existed
2) The records were imported from an external source and not created using the form.

However, the way I have designed the form is so I can see all relevant information linked with a specific invoice. This aids in gathering information quickly about an invoice but also so I can input credit note and invoice query information linked to a specific invoice on the same page.

Is there anyway to remedy this?

Or use a similar search function that returns records in my form "Main View"

The last thing I want to do is have to create the form again, although I don't think this will work either as reason 2) states.

View 14 Replies View Related

Forms :: Combo Boxes Used In Navigation Form

Nov 28, 2014

Can I use combo boxes placed in the detail area of a navigation form, above the sub menus but below the navigation? I am not able to get one to work properly . I can set it up but when I run the form, and try to pick an item from a list, it will not work...

View 2 Replies View Related

Forms :: Run Query From Form With Combo Boxes

Oct 23, 2013

I have a form with combo boxes that works beautifully, but I've been asked to add another feature to it. It requires adding a button that runs a query and displays the query results on the screen.The query code is:

Code:

SELECT DISTINCT Product.MSDS
FROM Product INNER JOIN tblStoreProducts ON Product.[ProductKey] = tblStoreProducts.[ProductKey]
WHERE (((tblStoreProducts.MaxUnits)<>0) AND (([Product.HazardKey])<>79))
GROUP BY Product.MSDS, tblStoreProducts.StoreKey
HAVING (((Product.MSDS) Is Not Null))
ORDER BY Product.MSDS;

One of the existing buttons on the form has this code behind it:

Code:
' btnHMIS_Click
Private Sub btnHMIS_Click()
On Error GoTo Err
If IsNull(Me.cboCompany) Then

[code]....

As you can see, the button is able to pass the parameters (which Company, and which Store within the company) to the report.

Code:
' btnMSDSSheetsPrint_Click
Private Sub btnMSDSSheetsPrint_Click()
On Error GoTo btnMSDSSheetsPrint_Click_Err

[code]...

How do I pass the StoreKey information into the query? Is it my query that's wrong?

View 2 Replies View Related

Forms :: Combo Boxes On Continuous Form

Sep 2, 2014

I have a main form with a sub form in continuous form view. The main form displays across the top and allows the user to enter the required 4 fields of info and then tab to the subform. Here each record is a line where the user has a number of text boxes to enter the required fields. There are 2 fields that are combo boxes that are limited to the lists - the first combo box is Observation and when the user selects their choice the 2nd combo box refreshes and gives them the choices of Categories within that Observation.

I am stuck on how to make the combo boxes "independent". Right now, if the user is in record 1 of the subform and selects an observation, the 2nd combo in that record refreshes and displays the records correctly of the categories available for that observation. Then the categories are "stuck" on whatever observation was selected in record 1 when record 2 is created. If in the 2nd record (or any other) the user selects a different observation, the categories in all records display the choices for that observation.

The categories need to be reflective of the observation within each record.

View 5 Replies View Related

Forms :: Synchronized Combo Boxes In Form

Nov 26, 2013

I have searched on internet for the method of synchronizing two combo boxes in a form based on Update Event. The problem was solved partially with this video : (link is not posted due to lesser number of posts. But it can be found on net, it's title is "Synchronizing Combo Boxes on Forms in Access 2007 " from Office Developer Centre.

When I followed the instructions in the video, it works but showed only the ID numbers of the categories in the first combobox. and the corresponding products in the second combo. Why cant I see the names of the categories? In the video, the names are visible in combo, I followed the same code but instead of names, IDs are shown.

View 9 Replies View Related

Forms :: Field In Form Based On Combo Boxes

Jun 4, 2015

My database is using data that is entered by the employees to generate Quotations. There is one important piece of information that will not be entered by the employee. The quotes involve metals which are priced based on market price and weight. I am planning on integrating a data feed with this information, but for now I want to enter it manually in a table. The price depends on two combo boxes one for "Precious or Base Metals", and one for "Metal Name". I want those two values to call the price from a table, and automatically fill in the "Market Price" field in the form.Also once that is in I would like to do my calculations. I am planning on using queries to do these. Is that the correct method?

View 6 Replies View Related

Forms :: Two Combo Boxes To Filter Form Won't Work Together

May 8, 2013

I have a database and a form that is based off of a simple table. The table has NO look ups and all of the formatting is text. The form is continuous and simply displays these fields. (Kind of like a company roster with name and department). I have two combo boxes at the top of this form in the header with the intent of filtering the form records by department and employee type (lets say A or B).

I have tried every way I know how to get these records to filter and they will not filter correctly. Utilizing methods I have used in multiple other databases, I set the two comboboxes to cascade based on a query in the recordsource. The vba I'm using in the after event of each combo is ....

Me.Filter = "[Brand] = '" & Me.cbobrand & "'"
Me.FilterOn - True
'Brand is the "department" and the other identical code is for Personel_Type

This filters the records but independently. So, cbobox1 filters the records to show all Brand 1. When cbobox2 selection is made it shows all the Personel_Type of the selection however the first filter is already disregarded. (i.e. When cbobox2 selection is made, it contains both brands instead of the one I've just selected and filtered in cbobox1. )

Outside of making two queries to account for each possible filter, I have tried setting a filter on the filterON, I have tried a SQL based VBA code, I have tried making two forms and attempting to set the filter on open but either way, nothing keeps the first filter selected (or the FilterON, or both SQL filters, etc). The ONLY way I have found to get it to filter both is with the filter function in Access, which is not useful as my users will not have access to the menu bars.

I have this EXACT same setup in another database and it works fine with 3 cbo boxes with an after even to set a filter for the recordsource for all three.

View 5 Replies View Related

Forms :: Change Form Details Based On Two Combo Boxes

Jun 12, 2014

I have two combo boxes in the form header and command buttons in the form detail. The combos allow the user to select either a customer or a prospect, then the command buttons open forms that only show records pertaining to the customer or prospect selected. Combos are "4Custcbo" and "4Proscbo".

1.How do I change which command buttons are available depending on whether the user has selected a customer or a prospect? Do I use two different subforms or is there a better way?

2.How do I hide the other combo box once the user has selected either a customer or a prospect?

View 3 Replies View Related

Forms :: Using Combo Boxes For Search Form In Read Only Mode

Jun 4, 2013

I would like to take advantage of using combo boxes to search records on a form but do not want user to be able to edit or change any of the data. Setting the form to read only of course, disallows use of any controls on the form.

View 2 Replies View Related

Forms :: Database With 3 Tables - Linking Combo Boxes And Text Boxes

Jul 29, 2015

I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.

View 4 Replies View Related

Forms :: Combo Box Recordsource Requery

Jan 7, 2014

I have a recordclone combo box for navigating between 240 company records, so the form will go to the correct record on updating the combo. Instead of clicking on the down button and scrolling through the list, I would like to enter letters into the box and update the record source automatically as I enter them.

I'm not sure what events to use since there appears to be very subtle differences between them (eg between 'on dirty', 'on change' and 'before update').So when I type in 'T', only those companies that start with 'T' are viewed in the combo box.I have discovered the VBA 'dropdown' command which would be useful for the user.

Code:

company.dropdown
Table_Company
Company_ID: autonumber
Company_name: text

The name of the form is "form1" and the combo box name is "company".The record source for the combo box is "query_company". In the form the ID field is hidden and the company name is not hidden.The criteria I have for the combo would be something like this.

Code:

SELECT Table_Company.Company_ID, Table_Company.Company_name
FROM Table_Company
WHERE (((Table_Company.Company_name) Like [forms!]![form1]![company] & "*"));

View 3 Replies View Related

Forms :: Changing Multiple Text Boxes To Combo Boxes?

Mar 14, 2014

there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.

I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.

View 4 Replies View Related

Forms :: Filtered Search Form Using Asterisk As Wildcard Default Value In Combo Boxes

Aug 23, 2013

I'm trying to make a filtered search form using "*" as a wildcard default value in combo boxes, this works for all the text fields except for the account number field (Numeric primary key). After quite a bit of reading up and searching, I tried using the following as the row source;

SELECT customers.ACCOUNT_NO, customers.CUSTOMER FROM customers; UNION SELECT "*", "All" From Customers;

But am still getting "#Error" in the combo box.

View 2 Replies View Related

Queries :: Multiple Combo Boxes And Text Boxes On A Search Form

Mar 24, 2014

I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):

1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators

I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:

SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =

[code]....

View 2 Replies View Related

Forms :: Create A Data Entry Form To Order Table Using 2 Cascading Combo Boxes

Jan 31, 2014

What I am trying to do is create a data entry form to an "order table" using 2 cascading combo boxes. I have created a data entry form based on a query. I can't get the cascading combo boxes to work properly.Here is the code:

Private Sub Combo0_AfterUpdate()
Combo2.RowSource = "SELECT L2_ID,L4_Element_name,L5_Category FROM qry_ord WHERE L3_ID = Combo0.Value;"
Combo2.DefaultValue = [Combo2].[ItemData](0)
Command4.SetFocus
End Sub

[code]....

View 2 Replies View Related

Combo Box Requery In Tabbed Form Mode

Nov 17, 2011

I have an application where I have developed a tabbed user input form with several tab pages to populate several tables with data using the master/child linking philosophy. There is one subform in particular that has two combo box fields that are related. I have them both set up to display value choices based on an undelying query. I want to restrict the scond box's choices based on the choice made in the first box and have written the following code to be applied after the first combo box is updated.

Private Sub RteGroup_AfterUpdate()
Form_Routing.OpType = Null
Form_Routing.OpType.Requery
Form_Routing.OpType = Form_Routing.OpType.ItemData(0)
End Sub

This effectively limits my second combo box choices based on the selection of the first box. It works fine if I run the subform individually but if I run it as part of the master form in tabbed mode I get an "Enter paramter value" dialog box asking for the value of the first combo box. it appears the requery is not functioning under the tabbed mode.

View 9 Replies View Related

Requery: Not Working

May 29, 2006

I am trying to recreate (with many changes) a database that I have previously made, but the requery macro is not working. On my previous database, I typed the following in the row source:

SELECT [sub-activity].[Sub-Activity ID], [sub-activity].[Sub-Activity Name], [sub-activity].[Activity ID] FROM [sub-activity] WHERE ((([Combo23])=[sub-activity].[Activity ID]));

Now when I type it in my new database, the WHERE part of the statement is causing nothing to appear in my combo box. Does anyone know why that would be and what I can do to fix it? Thanks so much. :)

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved