I have a form which runs specific queries and opens a report using combo boxes, these work perfectly fine if I just try to run them in the form. I have put the form into a navigation form and if I try to run the same query I get parameter queries popping up instead of just running the query and opening the report.
View RepliesI have a form with 7 List boxes linked to 7 Query's which in turn are linked to a table. Each list box if for a particular trade.
I am trying to select a person or persons from each List box and then have them sent to a report. I have Code to do one list box, but do not know how to link all boxes with code to a 'Open report' button.
The code I am using is as follows:-
Private Sub cmdOpenReport_Click()
On Error GoTo Err_cmdOpenReport_Click
Dim strWhere As String
Dim ctl As Control
Dim varItem As Variant
'make sure a selection has been made
[code]....
I have a database with a table name tblTeachersProfile and a report format based on the table. I also have a form with two combo boxes name cboState and cboCounty base on field from the table and a control button called Get. Now, I would like to make selection from the two combo boxes and generate a report after updating both combo boxes based on my selections.
This is what I have but it is not working: For my Get button
Code:
DoCmd.OpenReport "rptInServiceIndividualSchoolAndTeachersInformation", acViewReport, , "strCounty = '" & Me.cboState & "'" And "strDistrict = '" & Me.cboRegion & "'";
howdy all, ive never touched Access until 2 days ago so my experience is
sorely lacking but here is my question:
i want to create a form with a combo box from which a selection is
made (data in the combo box is simply a field list from the same table the query is searching, but
my stumbling block is that i want to include the query in the
same form as the combo box and have it dynamically updates based on the
selection in the combo box.
however for the life of me i cant get the query to update based on the
input (using [Forms]![Form]![Combo1] as the criteria in the query) i have set this criteria in the
CustomerID field of the query (which is also the primary key of the table)
I am struggling to pull out a report based on the combo box selection. I have NOI database and want to pull out a report for a specific customer that how many NOIs are generated by this customer..
I have a separate table of customer and another table of NCRs and the customer information comes from customer table.
I have tried the below statement but gives me an error message:
code for Macro that pulls the report in click event:
[CustomerName]=[forms]![CustName]![combocust1]
do i need to mention the report as well in some where in report ?
I have a couple forms with Combo boxes that look up data in queries. I noticed in testing that I could accidently type a "~" (and other characters) in the field and once I do, it causes a runtime error that shuts down the entire app (as opposed to letting the user backspace out of it or resetting the field). Before I put in some "Before Update" code to prevent the system from crashing, I want to make sure I am on the right track. I have already set the combo box to just show the list, not allow edits, limit to list, etc. Is there a way to prevent the user from doing this either by preventing the keyboard from working on combo boxes (not preferred) or by trapping it before the system crashes? I would think I could validate with a recordset, and create my own path out for the user, but I was hoping the combo box would have sort of done that work for me.
View 1 Replies View RelatedI have a report that gets its data from a query. I need the query to run before the report based on criteria based from two combo boxes on a form.
View 3 Replies View RelatedI have a form with a subform which has a lookup table (combo box) as a field. I want to be able, when I select a certain item in the lookup to have it automatically open a form. e.g. A field called insurance class - I select motor, I want the motor details form to open. If I select Fire, I want it to open the fire form and so on. I have already created the forms. Please help!
View 14 Replies View RelatedI'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =
[code]....
Attached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)
View 6 Replies View RelatedI have designed a main form which have buttons for about 30 different companies name to open, each button opens an individual company form. Now the companies list is growing day by day so i want to create a combo box which select the company name and open the relevant company's form.
Do I need to create a table which lists all the companies and then add a combo box on a main screen which select the company name and open the form but i need a VBA code for that.
I have one table with some info about my clients, I have a form, where I must choose this clients from combobox and then after clicking button Print must open report with info about specific (chosen from combobox) client and some another texts that doesn't change. Final result must be printed report as invoice.
I can't create report with only specific record information.
Hey guys, I'm not sure if this is possible, and it is the most challenging thing that I have tried to implement into my database to date.
What I have is a booking form which allows you to Add Bookings for camera kits.
When a customer comes in and would like to book a kit, the form must be filled in with the relevant details, I have 2 combo boxes on this form.
The first is the Kit selection, there are 5 camera kits.
The second is an option to book the full kit out, or just components.
So here's the tricky part...
When the first combo box selection is made (eg. Kit 3) I need the Kit3 table to be active.
Then, when the user selects "Components" from the second combo box, I need a form to open up based on both of the above.
So a form based on tblKit3 would be opened and the user can manually select the components that they require to be booked out.
Any help at all would be appreciated.
I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
View 4 Replies View Relatedthere is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
I am trying to make a search option in my form header. Right now I have two unbound combo boxes (CboAccountsfilter and cboCourseName) that I can use to filter my records. Currently, I can use the drop down for CboAccountsfilter and a list of accounts will appear. When I select one, the corresponding Course Names will appear in cboCourseName. This works fine...Code below. I would like to take the filtering a step farther and add checkboxes to filter the data. I my form, there currently exist several check boxes (yes/no)...(Priority, Rep Top Target, Manager Top Target, ect). I would like to have the option to use a check box to filter. I.E if I had a checkbox in my header called PriorityFilter, if checked it would only bring up those records that met the two combo boxes criteria and was a priority.
Below is the code I have so far...it doesnt have anything for the checkbox because I am at a lost of how to get started.
Private Sub CboAccountsfilter_Change()
Me.Requery
Me.cboCourseName.Requery
Me.Check178.Requery
End Sub
[code]...
I have been trying to modify a sample database to suit what I want to do but I am getting stuck on the very first part cascading combo boxes i want to open a form and add multiple items to a table - first i want to select, from a combo box a department - then select a supplier from all the suppliers/manufacturers related to that department then select a stock item based on the description from all the items available from that supplier
I have attached the database I am using to modify and my database.
Code:
Private Sub Text74_AfterUpdate()
Me.Text1280 = Environ("UserName")
If Me.Text74 = "MACGH" Then
Me.Text89 = "PureGene"
Me.Text85.Value = Date
End If
End Sub
Is there a way to insert a line of code in the above that would add the next number to a 2 specific textbox's (Text103 and Text509)? Maybe if a table was created with all possible values and then the code would reference that table. There is probably a better way though. An example would be, if record 1 is A1 (in Text103) and 1 (in Text509), when record 2 is entered Text103 would be A2 and Text509 would be 2. Record 3 would be A3 and Text 509 3.
Access 2010 project I am trying to develop for my workplace.
I want to be able to show a chart, a graph, of how many open orders we have had during the last month (showing per day) and during the last year (showing per months). In order to do this I am trying to create a set of queries that would provide me with such information in the form/structure;
[Date] [OpenOrdersTotal]
Yyyy-mm-dd 4
Yyyy-mm-dd 5
Yyyy-mm-dd 3
Yyyy-mm-dd 4
And after that I would create a chart I have
1. TblOrders
[OrderID] Autonum
[CaseID] Foreign primary key
[DepartmentID] Foreign primary key
[DateOrderMade] Date (yyyy-mm-dd)
[DateOrderAnswerd] date (yyyy-mm-dd)
2. TblDates
[ReportDate] Date (yyyy-mm-dd)
The evaluation in a query that runs all [ReportDate] logically would say;
Code:
Count(IIF([ReportDate] BETWEEN [DateOrderMade] AND [DATEORDERANSWERD]);1;0)
...but that wont do it.
I have attached a copy of the segment above ....
Hi
I need to print a specific form based on the selection made on a combo box.
I have been able to set it up to open the relevant form when the user selects an option from the combo box, but am unable to find a way to be able to print the specific report based on the selection.
I have a command button which prints a report based on the data in my current form, but would like it to also print the specific form based on the combo box selection.
Is this possible, and if so how is it possible?
Thanks in advance,
me
I have several comboboxes (6) on my form.How to populate these comboboxes with values depending on selected value in previous combobox.
Example.Lets say that you select value "Audi" in combobox 1, then available values in combobox 2 should be "A4","A6","TT" etc. and if you selected "BMW" in combobox 1, then available values in combobox 2 should be "3-series", "5-series" etc...
I am facing a problem. i am very amateur at access. I want to design a form on which there is one combo box and one command button. If i made a selection from the combo box and clik on command button it should show all the details related to that particular selection (say Shop Order) on a report. I dont know how to link this things.
report may be like..
Shop Order Description Length Width Hight..
Ax12 xxxxxx xxx xxx xxx
Ax 12
for a particular shop order selection there may be no. of parts that should show on.
like an assembly thing. Suppose Shop order for a bag is A23 and its different parts are belt and chain...
now
SHOP Order description ......
A23 belt
A23 Chain...
i hope i described my problem..
please do help if you can..
Thank you
Hemendra
I have made a Cascading Combo Boxes form . This form has 3 combo boxes. Its working perfectly
I have to select items in all 3 combo boxes to get a report.
What i want is, if I do not select (leave empty) any item in the third combo box it should give me the report for all the items in the third combo box "Me.SubDesCbo"
How can I do that. I am using the following code:
Private Sub cmdOpenReportSingle_Click()
On Error GoTo Err_Handler
Const REPORTNAME = "Yarn Report"
Const MESSAGETEXT = "All Combo's Must Be Selected."
Dim strCriteria As String
' build string expression to filter report
' to selected customer and account
[Code] .....
(MACROS ONLY)I am looking for a way to open a form in order to add a new record. The idea is that I open up the form with a MemberID and possibly the name already filled in on the relevant form. It is merely for ease of use regarding the user.
I have got as far as opening the the new entry form. I just need to pass the MemberID into the relevant field. If I use the wizard it is just finding a record of a pre-filled entry.
Basically I have a database that records commitments for clients. The user can go a client form, and within that form there is a subform which shows each expenditure commitment for that person (wihtin the subform there is also another subform that shows all income attached to each commitment). The user can use the Next and Previous buttons to navigate through the expenditure commitments (and the same if they want to navigate through the income commtiments within each expenditure commitment).
If you double click on any specific commitment whithin any part of the subform, then the expenditure commitment form (or the income commitment form if it is an income one) opens to allow the user to change stuff.
My database is set up so that each time a form opens the previous form closes. So when the user has the commitment form open and clicks close, the client form will re-open. My issue is that is always goes back to showing the very first commitment and the user then has to navigate back through till they find the one they have just updated.
What I would like to be able to do is when the user closes the commitment for that the client then the form opens up with the specific subform on the screen that they have just changed.The code I currently have written on the Close command of the Commitment is as follows:
Code:
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frmTotalCommitmentsbyClient
stLinkCriteria = "[FrameworkID]='" & Me![FrameworkID] & "'"
DoCmd.OpenForm stDocName, , , stLinkCriteria
DoCmd.Close acForm, "frmCommitments"
I essentialy just need the bit that would also say show the subform (which is called subfrmComms2) where the commitmentID = the commitment ID on the Commitment form.Now just to really complicate matters, I would also like this to happen if someone has the Income Commtiment form open and they close it, only the Income Commitment subform is actualy a subform of subfrmComms2 (above), but equally the income commitment form has within it the Expenditure ID, the Income ID and the FrameworkID.
1. I have created a button in a switchboard with embedded macro:-
Close Window
OpenForm (Form name: frmCustomerFind)
2. I have created a form "frmCustomerFind), in which I can select a customer name in a combo box named "CustomerName".
a. The row source: SELECT [tblCustomer].[CustomerID],[tblCustomer].
[CustomerName] FROM tblCustomer ORDER BY [CustomerName];
b. After Update Macro:
Open Form (Form name: frmCustomer)
SearchForRecord (Object Type: Form Object Name: frmCustomer
Record: First Where Condition = "[CustomerID]=" & Me.CustomerID
At the end, the form "frmCustomer" does open but not go to the record I want. It goes to the first record instead. (The frmCustomer has the "CustomerID" and "CustomerName" fields).