=([frmservices_2013].[Form]![sub2013])
I have this expression in a field on a form. It's been a really long time since I worked in Access. Is sub2013 a field on a form, in a table?
It's doing a running total of a field from a form. I can't find a subform with this name, or a field anywhere, I'm drawing a blank.
using Access 2007....
I have an access form (Customer) along with a sub-form (Work_done). On sub-form I have Running sum of Amount in Text box-1. I want that Total of Running sum be replaced with Main form's tables field total_amount. Is it possible that we can replace an amount of control of sub-form into main form's field?
View 1 Replies View RelatedI have a query, and I want a field that shows the current balance as of that transaction, eg:__________________________________________________ _______|__Transaction ID__|__Type_______|__Amount__|__Balance__||__1______________|__Deposit_____|__£10______|__£1 0_______||__2______________|__Deposit_____|__£30______|__£4 0_______||__3______________|__Withdrawal__|__£15______|__£2 5_______|So far, I have this:SELECT [Transaction ID], [Type], [Amount], (SELECT Sum([Amount]) FROM tblTransactions AS tblTransactions2 WHERE tblTransactions2.[Transaction ID] <= tblTransactions.[Transaction ID]) AS BalanceFROM tblTransactionsWHERE [Account ID]=1;Although this does not look at the 'Type' field; it just adds the amounts; regardless of it being a deposit or withdrawal. I'm really not sure how to add this.Thanks in advance.
View 11 Replies View RelatedI have a table with dates in field1 and an amount of seconds in field2.
field1 field2
01/01/2015, 1345
02/01/2015, -132
04/01/2015, 259
I would like to produce a query that performs a running total in the third column like so:
field1 field2 field3
01/01/2015, 1345, 1345
02/01/2015, -132, 1213
04/01/2015, 259, 1472
This is quite simple to achieve in Excel. (eg =SUM($B$1:B3))
What is the query formula for Access?
I have qry with these fields: DateOfPayment and Ammount.
I would like to add another field with running total sum. I am trying this:
RunnTot: Format(DSum("[Ammount]";"qryCFSUM"; [DateOfPayment] <=#" & [DateOfPayment] & "#" );"0 000"" Kč""").
But It still does not work.
Example of my data in "qryCFSUM":
DateOfPayment
20.1.2013
31.1.2013
30.3.2013
Amount
1 2000 Kč
15 456 Kč
23 465 Kč
And what I would like to have:
RunnTot
1 200 Kč
16 656 Kč
40 121 Kč
I want to calculate running total and find out the date when that total is greater than a number.
My initial plan was to use Dsum and then use dlookup to find when that Dsum value > [Fixednum].
But when I try Dsum and use Totals in query, access shuts down. maybe because of 15000 rows.
I have attached a sample database that shows what Im working with and what I would like.
I need calculated field (in a query) that executes a running cummulative total for three conditions: "="&Project Name, "="&Service and "<="&Date.
I can do it in Excel using SUMIFS(), but have no clue on how its done in Access 2010 !
The "Balance" field should be the end result:
Project Service Date Amount Balance
A Welding 1/1/2012 100 100
A Welding 1/2/2012 120 220
A Wiring 1/3/2012 150 150
B Welding 1/1/2012 103 103
B Painting 1/2/2012 124 124
B Painting 1/3/2012 155 278
C Welding 1/1/2012 106 106
C Wiring 1/2/2012 127 127
C Wiring 1/3/2012 159 286
I have a form that calculates number of hours each month. So a little box for Jan, Feb, etc.
At the bottom I have another field that sums it up. Well Im using just basic + to add the fields and it only works where there is something in each box.
I can't go through and put zeros in for everyone since a 0 and a blank mean two different things. I tried Dsum and just now after searching the forum, I tried nz.
Am I overlooking a real nice function that would assume a blank entry in the sum is a zero? or perhaps some trick I could try? Also, is there anyway to store the calculated total in the associated table, so I can query it later? It already has its own specific field that up until now was hand calculated and entered manually...like the monthly hours.
Thanks in advance
I have a table ("tbl_idq_all") with a text field for product codes ("scode"), a date field (dd/mm/yyyy) and a quantity field ("po_qty"). This table therefore holds future receipts of stock for products.
What I am having trouble doing is create a running total of [po_qty] based on [scode] and [Date].
A good example is stock code 10254. This has a quantity of 40,032 arriving 01/06/2013 and a quantity of 30,096 arriving 01/09/2013.
Therefore the running totals should read:
scode | Date | po_qty | RunningTotal
10254 | 01/06/2013 | 40032 | 40032
10254 | 01/09/2013 | 30096 | 70128
As you can see from the attached DB I have 70128 repeated twice in the RunningTotal column.
So I'm trying to create a running total, to be able to graph a cumulative total. After looking around, I think I've figured out that I need to use a DSUM formula.I basically want to get a cumulative sum of profit in the 4th column.
View 7 Replies View RelatedI am trying to create a query that has a self referencing running total based on the values (point totals) of itself (running total of values in the running total column that have already been calculated for all previous records) plus the total of new points being added in the current record, less the total of points being removed in the current record. This running total can never go below 0, if it does, the running total should restart at zero and add in only new points and begin the process again with the next records
I am able to do this in Excel in less than two seconds so I know there has to be a way to port this into a query. I've attached an excel example of what I am exactly trying to do
If it takes multiple queries to complete the required output I am ok with it. In my previous outtakes I have had up to 8 queries but just couldn't seem to do it..
Hello, I have 4 input field boxes in a form: "basic hours", "overtime hours", "holiday hours" and "total hours" i would like it so that when the user enters number(s) into the other field(s) the total field will calculate (add togther the other fields). So for example if the user puts "10" in the "basic hours" input field and "5" in the overtime hours" field then the "toal field" will display the number "15". i would like it so that the "total hours" field calculates the total progressively after each number in the other fields is input (ie a running total is displayed). The user will always fill in basic hours but 1 or more of the other fields can be left blank. I think i need to do some VB on the after update procedure for each field entry but not sure what the code is?, any help would be brilliant.
View 7 Replies View RelatedCan anyone tell me how to get a running balance on a report. I know how to create a running total, by setting the "running sum" property of a text box to "Over all".
I can't however see how I can adapt this to give a running balance (as in a bank statement for example). Attempts to do so end up in failure!!
Many thanks in advance.
Peter
I have three tables (Group, Customer, Savings).
Every member of a group do savings once every 15 days and each group has maximum 20 members, group has one to many relationship with customer and customer having one to many relationship with Savings (there is no direct relationship between group and savings) i have created a continuous form for saving entry. in this form i select a group which is unbound and based on that group, its members are listed in the combo box named CusID, after selecting customer other saving details are entered.
What I want, is that for every group i want a total saving for all that specific group's members selected in the mentioned unbound combo box in that continuous form, this total should be based on the group selected in the mentioned unbound combo box, in case i select another group the total should also be based on newly selected group.
I have a form that is displayed continuously and there is a text field in it (Text12).In the footer of this form I would like to add a textbox that is the sum of all Text12's on the form.I tried =Sum([Text12]) in the textboxes control source but that is just displaying an error when I run the form.
View 2 Replies View RelatedI wanted to take the values from the frmInvoiveItems' [LineTotal] field, subtotal all of them for a given invoice ([InvoiceApplied]), and place them in a new field under frmInvoiceInfo that I haven't created yet.
(I.E. I have three different items under frmInvoiceItems for one invoice. They all have a different price. I want to add all of their prices together, and display them in a "Total" field in the frmInvoiceInfo table. This new "Total" field should be the total amount due minus the "Deposit" value and anything in tblTransactions [I still have to figure out how to assemble that too... another question for another time]).
Is all of this possible without me having to store the information in a query? How?
In my database main form with subform. subform have query as recordsource.total of one of field in subform shown on main form. all is ok and show total correctly but when subform have no records then total field on main form shows #error. How to convert this value either into null string or zero(0).
View 2 Replies View RelatedAhhhh this is doing my nugget in!!! I have a simple table with 4 fields
ID (unique number)
DATE (date)
CAPACITY (number of SKU we can hold)
ORDERS (number of SKU on order)
the data looks like this
ID DATE CAPACITY ORDERS
1 01/01/2007 250000 250000
2 02/01/2007 250000 300000
3 03/01/2007 250000 300000
4 04/01/2007 250000 300000
So looking at the above table we can see that we have more orders than capacity in our factory, however they require to see this in graph form, so what I need is for each ID a running total of the CAPACITY and ORDERS so over a given date range i would produce a graph to find the "pinch points" where we could see if the capacity is less than the orders we have over time.
so my new table would be:
ID DATE CAPACITY ORDERS CAPRUN ORDRUN
1 01/01/2007 250000 250000 250000 250000
2 02/01/2007 250000 300000 500000 550000
3 03/01/2007 250000 300000 750000 850000
4 04/01/2007 250000 300000 1000000 1150000
etc. which i would create my graph from. Ive looked at Dsum and some other methods but cant get my head around it so any help will be much appreciated.
Thanks Steve.
Hi
I'm trying to create a database to keep track of invoices .
on work that was done.is there any sample database that I could take a look at.Or can anyone help me on this I'm trying to capture price on parts + price on labor = total the order form in the tradewinds database looks good but don't know where the code is for calulations? can anyone help me out?
Thanks
Tom
Im having a problem doing a running total on my form.
I want the result to be displayed in a text box, with the figures being collected from a column of figures.
Any help is appreciated
My friends, please help me figure this out. I am new to MS-ACCESS. I am trying to create a simple Leave system for my office. When a user requests a leave, the number of hours will be added to a table. I have created a form for this purpose. What I would then like to happen is, the next field in the Table is the sum of hours requested thus far. So that field would be Requested + Total requested Thus far. I can do it easily in Excel but I can't figure out how to do that in ACCESS. It is a very simple database and I can mail you my sample if you are interested. Thanks in advance.
yallah.
aliyallah@yahoo.com
Does anyon ehave any experience of running totals in an access query.
I'm reporting the data through excel not access reports so need a query not a report solution..
I have a table which looks:
RegionCategoryTypeDesc Period_IDPeriod_YTDPeriodTotal
CanadaEventsWSOP Team67Budget15000
CanadaEventsWSOP Team78Budget0
CanadaEventsWSOP Team89Budget0
CanadaEventsWSOP Team910Budget0
CanadaEventsWSOP Team1011Budget0
CanadaEventsWSOP Team1112Budget0
CanadaEventsWSOP Team1213Budget0
CanadaEventsTOTALAll12Budget15000
CanadaEventsTOTALAll23Budget15000
CanadaEventsTOTALAll34Budget15000
CanadaEventsTOTALAll45Budget15000
CanadaEventsTOTALAll56Budget15000
What I would like is to have an additional column which keeps a monthly summary of spend based on running total month 1to 12. All items have months 1 - 12 and are ordered in that fashion.
Any helpo really appreciated.
Simon
Hi guys
I am making a query that calculates how much costs i have per job. I'd like to create a function in the query that can calculate how big a percentage each job is. (need total for every job/ total for all jobs) but so far i haven't been succesful in this.
Anyone who could help me?
Cheers,
Takstein
I have a table called Team Standing that includes [TEAM] [PLAYER] [GAME DATE] [POINTS]. From this table I have a query that provides for each game date and team a count of the players, [GAME DATE] [TEAM] [PLAYER COUNT]. [PLAYER COUNT] is calculated using the total COUNT .
What I would like to add is a cumulative running total over the game dates. For example.
[GAME DATE] [TEAM] [PLAYER COUNT] [TOTAL PLAYER COUNT]
2007/01/05 --- 1 ------- 11 -------------- 11
2007/01/12 --- 1 ------- 8 -------------- 19
2007/01/19 --- 1 ------- 14 --------------- 33
I am having trouble figuring out how to get a cumulative running total. I have tried a number of different sub-queries and selects but I can’t seem to get something that works.
Any help or ideas would be greatly appreciated.
Thanks
Hi,
Am trying to create a query for a chart where I can total the employees over time but am having real trouble creating a running total from the "Total" field within a query but cannot seem to get it at all.
TotalStartDateLeftDate RunningTotal
126/03/1957
121/03/1971
127/02/1986
115/02/1988
207/03/1988
007/03/198831/05/2007
Here is my current SQL query:
SELECT Sum([CountOfStartDate]-[CountOfLeftDate]) AS Total, Atest1.StartDate, Atest1.LeftDate, Sum([CountOfStartDate]-[CountOfLeftDate]) AS RunningTotal
FROM Atest1
GROUP BY Atest1.StartDate, Atest1.LeftDate;
Can anyone help please?
I've been tasked to create a report that shows the date an employee hit a loss of $200.00 or greater for the company. Each day they work, they will either have an overage or a shortage in their till fund. They start out each day with a set amount of money in their till and at the end of the day they are expected to turn in that same amount; the tills are used for making change. If they are short, and the amount is fairly large, hence the $200.00 mark, then it becomes an issue that needs investigating.
I need to total these amounts up and when the total hits a negative $200.00 or greater, I need to display the date it occurred and then display the amount the company would have saved if the employee had been either terminated or transferred to a non-revenue department.
Getting the "saved" amount should not be a problem once I figure out how to get the above indicated loss amount.
Any ideas?
Kevin