How to let the user save a preliminary version of a record in a form? I have a table with records representing airplane status. Sometimes, the user wants to save a preliminary version of the status and create some other versions and save all of them for that specific airplane, but this does not happen for all the airplanes. How would I do that? Is it possible at all?
View RepliesI have a form that has a control to search the table for a specific record See code below that is on the AfterUpdate event of a Combo Box
Code:
Set rs = Me.Recordset.Clone
rs.FindFirst "[ClientID] = " & Str(Nz(Me![cboName], 0))
If Not rs.EOF Then Me.Bookmark = rs.Bookmark
[Code]....
What I need to know is how to make the rowsource based on the filter and not the table.
I want to hyperlink from a query direct to the relevant record in a specific form. I have a hyperlink field in the form which shows up in the query. When clicked in the query, this hyperlinks to the form but I cannot make it select the correct record in the form.How do I get it to select the correct record?
View 3 Replies View RelatedI have been trying to come up with a solution for a problem I am having for a while to no avail. We have a backend database that stores various tables full of data. We then have a custom Excel Ribbon that connects to the database and pulls in the different tables depending on the user selection form the ribbon. Everything is working well on that end. The problem I am running into though is that in the development phase of the ribbon and database we had multiple versions and so there are still some people who are using old versions of the ribbon and therefore not connecting properly to the database. Is there some type of code I can add into the database and ribbon where it checks for a specific version to ensure the user is using the most recent version?
Basically, before any type of query is run to connect to the database the ribbon would have some sort of label on it somewhere and the database would check for that label and if it is correct, the code proceeds and if not a message box appears that tells the user they are not using the most current version of the ribbon and exits the sub?
After I enter data into one field in a record I would like the form to save the record when I move to another field in the same record. It seems that the record is only saved when I exit it entirely. Is there a way to save a record when moving between fields in that record? Can this be done without using an Event Procedure for each field?
View 8 Replies View RelatedI am new to access i have a problem which is i have made a form which contains a subform and a read only subreport, what i want is the ability to select a record in read only subreport as in the picture attached and make a button that when i press on it, it should copy the values of the itemsID field, Packing field, ContainerNo field and origin field from the selected record and then paste them in the subform below.
Also i want to add more then one item, so the when i press on another record it should paste the values below the first record.
table A has 10 records where 1 field is set as REQUIRED/UNIQUE. the table B does not have any record but have a same field like table A. what I want is that if user insert the record in table B it should first check whether record is already present in table A or not, if already exists it should not accept insertion. and if not already there in table A it should insert record in table B.
View 3 Replies View RelatedHello!
I am trying to update the current status of an asset, when it was returned or checked out. At the same time, save the changes in a history table to record all the changes in past. I can do individually from different tables and different forms, but I would like to do from one form and one record entry. Is it possible? If so can anybody help?
Thanks
JVirk
I have a continuous form for which the recordsource is a query that retrieves dates from 10 days in the past to 10 days in the present. I want the record with today's date to be at the top of the form. The record with the oldest date is always on top. Is this a scrolling issue? How can I get the record with today's date to appear on top?
View 5 Replies View RelatedI am working on a form and I only want the information to be inserted into the database if the user clicks the button at the bottom. In other words, if the user is filling out the form and then closes the form, I do not want that record saved.
View 2 Replies View RelatedI have a form named CORRES_TYP with 3 text boxes and a list box. I also have a separate table with 3 field from where the information I put in the form was saved.
In my form whenever I put information on the textbox at hit add record button, these information are saved in my table and will reflect on the listbox on my form below the textboxes. Also if I select a record in the Listbox the record I selected will apprear on the corresponding textbox in the same form.
My problem is that I have been trying to create a command button that will save and change the existing record everytime I select an item in the list box and modify the information through the textbox. Here are some infromation about my table and form:
Table name = CORRES_TYP
Field 1 = CODE (Primary key, No Duplicates)
Field 2 = DESCRIPTION
Field 3 = FOLDER
Form name = CORRES_TYP
Textbox 1 = CODE
Textbox 2 = DESCRIPTION
Textbox 3 = FOLDER
Listbox name = LIST14
I have a simple EXIT command button that runs these macro actions: save record, close form. I also have a SAVE command button that runs this macro action: save record. If a user closes the form without clicking either the EXIT or SAVE command buttons, will the record changes be saved in the datasource table.
I have found from testing that the data is always saved even if the user does not click the EXIT or SAVE buttons, but I wanted to be absolutely certain. Is this correct ?
I am creating a form that has a bunch of yes/no box for daily task. Is there a way for access to record which user selects yes/no.
For example
yes/no box1 - user 1 completed this task
yes/no box2 - user 2 completed this task
and so on
So when i look back i can see which user complete which task. I did a bit of research and saw that i can save a user that update a record. But since this is a daily task, each new record will be a new day.
I want to open an existing record via a form and then edit that data but save the form as a new record. Basically a form used for handover/takeover process where most of the data remains the same but the new form is the basis for the next handover/takeover.
View 6 Replies View RelatedI am adding new record into subform via recordsetclone method. The problem is that record is added but on save it does not appear in the table. If add this record manual using subform everything works. When record added manually update of the record works fine.
C
'Add Wastage value to flooring area section
Private Sub Wastage_AfterUpdate()
Dim rsFlArea As DAO.Recordset
Dim Wastage As Double
Dim Item As String
Set rsFlArea = Me.OrderFloorAreaEdit.Form.RecordsetClone
[Code] .....
I need to export a specific record in the table. The menu's export option only export the entire table. Is there a way to define certain record to export?
Thanks
Well, here's another newbie question.
First let me say, I've search this forum for as long as tolerable looking for a simular problem as mine and could not find one. I am sure this isn't the first time this question has been asked.
I have taken a few Access courses at a local college for my own personal use and have discovered that the courses albeit expensive, just covered what appears to be mere basics.
At this time, I do not understand SQL or VBA. Nonetheless, I have created a database to organize my four bookcase library.
The library consists of books & mags, records(33's, 45's and 78's), DVD's, VHS & Digital tapes, CD's(Music and software).
I have created tables for Books/Mags, Video and Music. All of which pulls required data from a list in other tables such as mediatype (Book, DVD, Record etc..), location(C1S2R which has a description field as Case 1 Second Shelf Right side area) and Genre(Country Music, Video Sci-Fi, Fiction Reading etc...).
When I query on a field such as Title, it brings back the desired results. However, when I query on a field where the data was import from another table such as Genre, the result is an empty table and yet the record truly exsist.
For instance this is the criteria I used Like ["Genre"] & "*" When prompted I typed V and expect at least one record that had Video Sci-FI listed. The result came back blank. When I just hit OK then the whole table would display and sure enough the Video Sci-Fi record would be there as well.
This is true of all the fields/data that has been pulled into the table from another table. I have tried many combinations of the criteria command to no avail.
If I can get this part to work I can quit biting my nails (or should I say nubs)
Thanx in advance mates.
~Anobody~
~a nobody today a somebody tomorrow~
I have a "Search" form that I am using to search through a query in a list box of all of my Customers. Once the record that I am wanting to view comes up I highlight it and click a "View" button to bring up another form with the customers full record. When this form is open I am able to update the customer information and add User's to it if necessary.
My problem comes after I click on my save and close button that takes me back to me search form. I want to close the search form and the error I get is "The record cannot be deleted or changed because table "tblUserProfile" includes related records." I click OK and get a SECOND error stating "You can't save this record at this time. MS Access may have encountered an error while trying to save a record. If you close this object now, the data changes you made will be lost. Do you want to close the database object anyway?"
I have already made my changes and saved them in the form with the customer record so am not sure why I am getting an error when trying to close the Search form.
My database was working fine. Now, if I have to save or edit a record, I get a message Run time error 2107. The value you entered does not meet the validation rule defined for the field or control. I am able to enter and edit new records in the table. I did not change any validation in form. Then it goes to debug mode and highlighted this code (me.recordsource=Listsql - is highlighted)
Private Sub ListSearch_Click()
Dim dBS As Database
Dim Rst As Recordset
Dim Listsql As String
Set dBS = CurrentDb()
Listsql = "Select * from MasterData where employeeid ='" & [Forms]![MASTERFORM]![ListSearch] & "'"
[Code] ....
I have a main form and a nested subform. The main form is based on customer details and displays customer name and the customer primary key (custID). When this form is opened i pass two parameters to it, BPID and SIID. A BP is a business picture and a SI is a sales interaction. These are in a one to many relationship.
The subform displays a sales interactions (si) of a business picture (bP).The subform is set up with master child links of custid;bpid. This restricts the subform to only showing records for the a specific customer and specific BP (the user can cycle through all the linked SI's using the record selectors.
When the main form is opened I want the subform to display the sales interaction the user has selected when opening the main form based on the passed SIID but cannot get this to work. At the moment the subform just displays the first record.
I want to autofill in a text box with reference to a table I have in Access.I have the first text box that returns the first record in the table i want to get the data for with "text1 = Dlookup("numplate", "cars", "")
This returns the first record. I want the second text box to return the second number plate from the table.How can I get the second record to be returned...?
Is it possible to use VBA or macros to open a table to a specific record?
I know how to open a table in database view using a command button. I'd like to have it open to or automatically scroll to and select a specific record, based on the content of the form. This way I don't have to spend time scrolling through the whole table to try and find the desired record.
I'm very new to access database and I'm trying to create a macro that allows the user to enter data after seeing a mistake in a form. I need a macro that will open the specific table and record of a piece of data. For example there is a student TestName3 whose grade on a competency is 30% but should really be 45%. I want a macro by the competency percentage to allow the teacher to edit that without looking through the entire table. The macro should prompt first to ask if the teacher is sure they would like to edit, second prompt asking for the student's unique ID number, and finally be taken to the specific record and table related to that competency.
I have tried to use a vastly overcomplicated DLookup and Order column to give me the value for a acGoTo search.
Here's what I have.
Option Compare Database
Dim answer As String
Dim response As Object
Dim gotoresponse As Object
Private Sub Command71_Click()
On Error GoTo Command71_Click_Err
[Code] ......
I have 2 Tables. Table "BOL" and Table "Containers". Both contain "Job_Number" and "Bill_of_Lading_Number" as a field. I would like to get a "Bill_of_Lading_Number" record from "BOL" and add it to "Bill_of_Lading_Number" in "Containers" table based on condition when both "Job_Number" are equal. I have tried two methods. One with DLookup and another with SELECT. Both work but with a small problem.
When I execute them, a dialogue box popup asking me to enter the "Bill_of_Lading_Number" value while the required value shows as dialogue box heading. This box shouldn't come up and I am not sure why this is happening. "varsJobCont" variable I get from another form and is "Job_Number" value that determines the record to be selected.
My Both Codes are:
Dim strBill As String
strBill = DLookup("Bill_of_Lading_Number", "BOL", "Job_Number = " & Application.TempVars("varsJobCont").Value)
DoCmd.RunSQL "Update Containers SET Bill_of_Lading_Number = " & strBill & " WHERE Job_Number = " & Application.TempVars("varsJobCont").Value
Dim strBill As String
Dim dbs As DAO.Database
Dim rst As DAO.Recordset
Set dbs = CurrentDb
[code]....
shows the dialogue box and the heading "bbb1055" is actually the correct value I needed to get. It should have been put in the other table automatically without the need to insert it manually again.
I have a form where a user enter an ID and some details. This is saved in Table A.The ID is also in Table B - What I want is, once the user saves it in Table A-I want it to be deleted from Table B. Ultimately, Table A has all information and Table B will only have those IDs that haven't been entered in Table A. what is entered in Table A shouldn't be there in Table B.Is there a way to do this using a macro?I did find a VBA code online -
Private Sub Submit_Enter()
DoCmd.RunSQL "DELETE * FROM TBL_ClaimsToBeAssigned"
where [Claim ID] = Forms![FRM_PendsAssign]![Claim ID]
DoCmd.SetWarnings False
DoCmd.RunSQL "DELETE * FROM TBL_ClaimsToBeAssigned"
DoCmd.SetWarnings True
End Sub
DoCmd.OutputTo acOutputReport, "MD Form",".xls" "C:Documents and SettingsKevanAlderton.THERMOSHIELDDesktop", True
any ideas what is wrong ??
many thanks