How can I put search button on the navigation form to search all form in my database? I have eight form I would like to be able to search to be able to pull all information for one student worker.
View RepliesI am not able to disable NavigationButton when i login navigation form using login form. I am using MS access 2007 - 2010.i am using below code but getting error.
Forms![Navigation Form]!NavigationButton13.enable = False
Error
Run-time error '438'
Object doesn't support this property or method.
Any other method to disable NavigationButton.
I have my setup all complete and everything works great. Now, I have a subNavigation form within the Navigation form. Thing is, I am not sure how to go about the code for the query to pick up the Beginning and End Date to generate my report. Here is my Form setup:
frmNavigationForm (Main form) - Tabs on top.
NavigationSubform (first Navigation Form, where I have a tab called Admin)
frmAdminNav (where I have embedded under the Admin tab) - Tabs on left side.
NavigationSubform (Second Navigation form where I have a tab called "Search") I don't recall what the name. How do I find it, stupid question, I know...
frmSearch (where I am trying to pull a detailed report from date search criteria)
Here is one of the codes I have been trying to use in my Query and nothing seems to work.
Code:
Between [Forms]![frmNavigationForm]![NavigationSubform].[Form]![frmAdminNav].[Form]![frmSearch]![BeginDate] And [Forms]![frmNavigationForm]![NavigationSubform].[Form]![frmAdminNav].[Form]![frmSearch]![EndDate]
have set up a navigation form which contains 5 unbound subforms that are made visible or not visible thru the on click event of command buttons on the main form, the subforms have a command button with an embedded macro that searches for a record based on what has been keyed to an unbound text box on the subform, this works fine when the sub forms are opened independently of the navigation form but when the search is done from within the main form, the error message is, "....cannot find the referenced from frmAQIFAList" subform, I tried referencing the main form name infront of the subform name but this also doesn't work, perhaps this would be better with code ? or is it because the subforms are unbound ?
View 4 Replies View RelatedBasically I want to put a code in the "on load" event of a form that enables or disables navigation buttons based on a value in a table (the table has 1 record and 1 column).
So if the value is "A", I want to hide navigation buttons on load; if it is "B", I want to show navigation buttons on load.
I know I can set this property in each form, but I have a number of forms that I want to configure at the same time.
My problem is that I don't know how to reference the value in the table.
I am new to MS Access! I have design a database and a form to record the information of customer feedback.
The first thing I want is to search the record from the whole database. Secondly I want to print that searched record. And finally I want to make a Form Reset Button.
I have made a "Clear" button but it is not working correctly and removes the record from the database after saving.
I have attached the database!
I am trying to create a navigation form on a split database with front end and back end.But Access is not letting me drag forms or reports into the navigation form. Why?
View 1 Replies View RelatedI have a database that uses four forms and each form has it's own table and each form has it's own search button to find a specific record within that table. I would like to use one search button that will look at all four tables and bring up the correct record when the request number is entered. Can I link all the tables to perform this or is code required? Can someone send me in the right direction for how to do this? Give me an example of code if it's required?
Thanks for any help I can get.
Laura Edmark
So I'm not new to Access but I am to 2010. It has been a bit "challenging". Here's my first question:
1.) I'm trying to search on a field by using a command button. I basically want to click the button and the following message pops up: Enter MRN.
2.) When the MRN is entered, I would like the form to filter on all records that have this MRN.
3.) In old versions of Access, I would create a Macro for this and then call the Macro in the form.
4.) I've tried the FindRecord action in the Macro but it does not work. I actually came across several actions that don't seem to be working properly (getting error messages).
5.) In my head, this should be one of the EASIEST things to do. I've done this before in several different databases. I will admit it has been a few years since I have used Access for this (ie. building forms, macros etc.). I've primarly used it to pull in a data set and then run some queries to get the data I need quickly versus using Excel.
How to open a search form with a mouse click on Button_Search
My idea is to pop up a form where user can enter the search text and select the required name and get back to the old form with all details about the entry. This form alone is workign fine. I want to call it in a mouse click. and pass the data back to old form.
I am using Access 2007 and am a former user of an old flat-file 32 bit program under Windows 3.x. I am fairly new to MS Access 2007. I run a filter or query, which will return X number of records. Then, I will search those X records by specific text, such as "assist" from the record navigation buttons. I search for "assist" and the text will be highlighted each time it is found in any text or memo field in the record. Hitting Enter takes me to the next occurrence and highlights the text. If "assist" occurs in 4 fields in a record, for instance, it will be highlighted in each of those 4 fields one by one as I hit Enter. The next Enter takes me to the next record and will then continue to the next occurrence of assist" in any of its fields. It will continue to highlight "assist" in those fields, in succession, until the last occurrence in all of those records is found, in which case Enter does not return "assist" anymore because the last occurrence has already been found.
This does not always work. Often, I get every occurrence of "assist," but in the current record only, even though the word exists in other remaining records that were returned with my original filters/query.
A message "Microsoft Office Access has stopped working" appears everytime I input something in the Subform [Search] box beside navigation button. After that, the database closes. Attached is the screenshot of my subform.
View 5 Replies View RelatedI am working on Data entry form where a user can enter the details in the form and save and go ahead, its a single form in default view. I want to provide an edit button with navigation control in this form only where they can edit their wrong record for update.
View 1 Replies View RelatedIs it possible to define the position of a navigation button. For example, I want my first navigation button not starting totally on the left but a bit indented. Possible?
Secondly, suppose I have combo boxes on my first navigation button and for each combo box and choose a value, next I move to the second navigation and then back to the first navigation button. Then it always seems that the values of my combo boxed are reset to default value. Can this be avoided?
I currently have a database where new records can be entered in a "New Part" Form and Records can be viewed(but not altered) in a "Part Search" Form. The forms are the same except one is allowed to edit. I have also created another form where I am trying to search the "Part Search" Form via a tracking number. I want to have a text box where users enter a tracking number then click the button to take them to the record on the "Part Search" Form.
View 2 Replies View RelatedHi,
Is there a way to totally remove the navigation button bar? Even though setting form navigation buttons to "No" removes the buttons, the "bar that held the buttons" remains in it's default gray colour. I'm trying to make a subform blend in with the main form but this is posing to be a problem because of the old remains of the navigation "bar" (See attached image to see what I mean).
TIA.
i need to create a system that can search data using keyword.so i want to create search button that i will create it at form. currently i have 1 table and in that table i have 10 fields which are project_name, doc_ref_no, doc_title, volume, book_no, author, doc_status, box_barcode, filling_location, doc_availability.
i have create 2 forms, one form for user to add new record and another one is to search record. the user can search by enter project name, doc title, volume and box barcode. for project name and volume, i use combo box and for doc title and box barcode i'm using text box.
i want to create search function that can detect from user keyword and even user did not fill in all the form, the system still can search the record.
I have a form that has a subform on it. The main form shows a category of furniture and has custom navigation buttons and a search text box for asset numbers and command button that runs the search. The subform shows the asset numbers associated with that furniture category, sometimes there is only one asset number, in other cases there could be 60. There is a scroll bar to scroll through the asset numbers when there are too many to see in the initial window.
The buttons all work as they should except when I search for an asset number that is part of a category that has too many asset numbers to show in the main window. When this happens the "previous" and "next" navigation buttons do not take you to the previous or next record. All of the other buttons on the form work though - you can go to the first, or the last record, and you can search for a new asset.This is the code for the search:
Code:
Private Sub cmdAssetSearch_Click()
Dim rs As Object
If IsNull(Me.TextAsset) Or Me.TextAsset = "" Then
MsgBox "Please type in an asset number to search for.", vbOKOnly
Me.TextAsset.SetFocus
[code]....
I've also attached a picture of what I mean when I say there are more asset numbers than what the window shows.
I have this database with the purpose to storage all the tasks that are done in my team. I have a table named Tasks with all their fields. Now, I would like to set a more user friendly way for clients to update this table. I have created another table with a list of most common tasks, so when a client wants to add their tasks list they can choose one of this tasks and add it to the list. I had created a form with multiple items that contains the common tasks and next to each task a button that adds the information they choose into the table "Tasks". This works just fine. However, I would like to add a single button at the top to add all the tasks instead of having to choose one after one.
The "Add All tasks" button has this code:
Private Sub Command79_Click()
Dim valSelect As Variant, MyDB As DAO.Database, MyRS As DAO.Recordset
Set MyDB = CurrentDb()
Set MyRS = MyDB.OpenRecordset("Tasks", dbOpenDynaset)
[Code] ....
I want to have my users open the database to a windowed navigation form. Maybe a shortcut but how would I set it to when the database first opens it goes strait to that windowed(or dialog) box.
View 1 Replies View RelatedCan I create a navigation form after i have split my database and moved the background to my network
View 1 Replies View RelatedI have a search button / text field on a form with the following code:
Private Sub SearchButton1_Click()
Code:
Dim rsTemp As Recordset
If IsNull(Me.SearchField1) = False Then
Set rsTemp = Me.RecordsetClone
rsTemp.FindFirst "[CompassRef] = '" & Me.SearchField1 & "'"
If Not rsTemp.NoMatch Then
Me.Bookmark = rsTemp.Bookmark
[Code] .....
Unfortunately it only returns the 'No record found' MsgBox, even if SearchField1 is populated with relevant content.
I am creating search boxes within that searches customer by lastname, phone number, address and suburb. Will I be able to use one search button for all of them or do they have to be individual buttons?
View 4 Replies View RelatedI am currently the administrator of a fairly large network and am trying to keep inventory of all my domain assets. I would like to be able to search for these assets by a number of different ways such as computer name, location name (ie: CEO office, accounts receiveable, or human resources), slot number on my switches (I would like to know whats connected to where), and also what switch it is located on. Right now I am using a combo box to populate these fields but would like to implement a search function instead to be able to search with whatever information I have.
View 1 Replies View RelatedNew to the navigation form: I need several forms in the navigation form to all relate to the same client ID field. I have this information on the main form but the form with in the navigation form will not pick it up.
I have tried =[Forms]![Frm Client Information Navigation Panel]![ClientID] But just cant get it to pick up that information...
I would like to have something like the master link fields and, child link fields but when I add a form to the navigation form this option in not available.
I have this code which filters a form with the command button ("Command 82"), but it only searches in the "TASK_NUMBER" field.
How can I make it search multiple fields at once? I feel like you can just use the "Or" operator, but where do I put it?
Private Sub Command82_Click()
Me.Filter = "TASK_NUMBER Like '" & "*" & Me.Text80 & "*'"
Me.FilterOn = True
Me.Requery
End Sub