I have a form to modify existing property records. Each record has a PIN number and a unique ID which is a combination of year, state county and PIN. The same property can have a record for more than one year. On this form I have a combo box for selecting the record to be modified. The combo box includes PIN and Prop ID. The combo displays each record by PIN then ID as separate records. For example:
PIN Prop ID
06104409012 2007-IL-Lake-06104409012
06104409012 2010-IL-Lake-06104409012
But when I select a record it will always select the first record with identical PINs. In the case above if I click the 2010 ID the record fills in with the 2007 ID.
In Access 2013, I would like to be able to choose more than one value from a combo box, but I believe this is not possible. However, I can prepare a list box and set the Multi Select to Extended. Doing this, I can indeed select more than one value, but I don't know how to get those values into a text field in the form. (If poss, they would become comma separated in that field). Ideally, the code would call the list box because it would take up too much space if it were there all of the time.
I have a working combo box on a form that displays issue numbers for part number typed into a text box.This all works fine when the list of issue numbers is below the displayed list (16), but when the list is longer than 16 you cannot seem to select anything after item 16.
When the combo box has, say 25 items a scroll bar appears allowing the user to scroll down to item 25, but when you click the mouse the list just reverts back to the first 16 items? The only way to select an item after 16 is to select item 16 which then closes the combo box, then when you reopen it the list now shows items 17 to 25 which you can then select item 25.
This is the same in reverse, when you have item 25 selected, you cannot select item 1. When you click the mouse the list reverts back to items 17 - 25.The combo box is populated in code using the lost focus event on the text box for the part number.
I am trying to use a combo box to control which table a data entry form will write data to. I want to create a form that has a combo box to select from a top level table that I will call "Stores". Once a "Store" is selected from the drop down, the next field on the form will be a data entry field. The data entered in that field will be written to the table selected by the preceding combo box.
So, basically I would have say Wal-Mart, Macy's, Sears, K-Mart and etc, listed in my "Stores" table. Once I select one of the stores from the drop down, I would then enter a "department" name in the data entry field and based on which store I selected from the previous combo box, the data would be written to that stores department table (which each store will have its own department table), e.g., WalMartDepts, MacyDepts, SearsDepts, etc...
Now I have a combo box "cbo_items" and a text box "txt_selectedItems", I want to populate text field with items selected from the combo box, every time i select an item it appears in text box and to be separated with comma, so text box appears like this ( item1, item2, item3), and after finishing the whole thing the result appears in lable "lbl_result" as "total items selected: 3 items".
I wish having only one record display in a continuous form, after an "On Click" event. The database in which this question lies is attached.
On opening, the user first interacts with Table 1 (Continuous Form), then by clicking on ID on the details for that particular record appear.
What I would like to do is: When the user clicks on ID, only that record whose ID has been clicked on displays first on the continuous form, and then the PERSONAL form opens. To clarify further, my wish is that the sequence of events is:
User Opens Table 1 Form
User Clicks on ID (for example, let's take 2)
Only Record with ID 2 remains on the Continuous form.
Then details for record 2 display on the Personal Form that opens next.
The problem I currently have is with step number 3 above.
My Database is really simple, it contains 1 table (called Querys) and a form called Dashboard.
In my main form (Dashboard) I have inserted a sub form which shows all the records in my table (called Querys) when I use my main form and add a record this sub table can then be refreshed and it shows all my records.
This part is fine,What I would like to do is be able to select a record in my sub form and it show the record data in my main form. This would really speed up the navigation process as the database gets bigger.
I would like to select a record on an already open form called "form_candidates" using a search facility but can't get it to work.
In "form_candidates" the data settings are set to "yes" (filters/edits/deletions/additions) and data entry is set to "no". On opening, the form is set to go to a new record.
In this form I have a button that opens a record search form so both forms are now open. I enter the first few letters of the surname into a text box, press a button and the listbox is populated.
In the doubleclick event of the list box I have the following code:
Dim CandID As Integer CandID = Me.List4.Column(0) DoCmd.OpenForm "form_candidates", acNormal, , "forms![form_candidates]![Cand_ID]=" & CandID
So I double click on the record, the candidate form is being filtered but the record isn't being shown.
I am relearning Access and having a little difficulty. I am creating a Access database that links tables from an I series system which I have done trouble free. In the database I have pulled up for example a patient demographic file (hospital). I have form frmSearch that prompts the user to enter the medical record number OR they can search by name. I have a query that takes that information then loads a 2nd form to display the query results in a list box. I would like to be able to click on one of the results from the 2nd form to then load another form that will display all of the patient information that was selected.How do you set this up so that with the results shown, I can click on one of them and it will load that patient into another form pulling the rest of his or her information from the table file?
I have a form that currently uses a "catch all" table for listing available equipment to choose from for an equipment field. I call it tblEquipment. What I want to do is to make it so when I type a name in (1 of 35) in one field of the current record, the record source for the equipment field immediately looks at a different table that has equipment available only for that name. To do this I plan on making 35 different tables with limited data originally found in tblEquipment. I would call these tblEquipment1, tblEquipment2, etc. I do not use a sub form, nor do I want to.
So my questions are:
1) can this be done 2)If it can be done, how can I do it?
I have two subforms on a main form. Both use similar queries and nearly the same set of records and PK. The first subform is for data entry and the 2nd subform is a continuous form that lists the entries in order that are made from the 1st Subform. (for entering in vacation days and appointments)
The continuous form cannot be edited, it is to be a list for viewing the information only.
I have an edit button next to each record on the continuous form. When the button is clicked, I want it to take the 1st subform to that specific record as well (same PK), so the information can be edited there.
I cannot figure out how to get the 1st subform to go to the record on the continuous form when the button next to that record is clicked on the continuous form.
I tried the DoCmdSearch for record and just keep getting object is not open errors.
I have a problem with my database I have a combo box that will search for my record. Actually its working I input the specific number it goes to the specific record. But I want, if there no existing record in my database it will display a Messagebox that "No record Found" I try to put a code in a macro builder in a after update property field but nothing happened.
Expression code that it will display the msgbox if there's no record found.
the given code from macro builder is attached. I try to have an if else statement but I dont know how to not equal that giver conditional expression.
I created a search form that searches for Customer Number, Part Number, and Revision Number. The results are displayed in a List Box.
I want the user to be able to make a selection on the List Box and click an "Open Selected" button that launches that record in another form. How is this possible?
I have a quick question on Forms. I have a combo-box in a Form that displays the student ID, first name, last name, and test scores from a source table. I have selected only specific fields to display from the source table in the combo-box. The intention is to note down the ID of a student for future querying purpose and I’m looking at easier ways to do it.
The question I have is, as I look down the drop-down and select a student by his last name (say Johnson), I want the student ID to be selected (or copied) when I click the specific student. There could be many students with same last name, and once I select a particular student from the drop-down, I was wondering if there was a way for this ID to be copied or selected. At present, the student ID is written down and used later for querying other information.
Not sure what to search for so I thought Id write a new post:
I have a combo box which selects 3 items-
Primary key, Surname, Firstname
After an item is selected, the fields are populated according to the item.
Since there will be many records, it would be nice if the user can begin typing the surname and have predictive text, so the three items should then be-
Surname, Firstname, Primary key
So my question is, how do I get at the primary key if it is not selected?
If this does not make sense, what I am trying to say is:
The surname is selected, but I want to do a calculation based on the primary key so I get all the data associated with that user. I cant use the surname because there are duplicates.
ok so I want a form that has a combo box with [item_id, item_name] on each row that i select. when i select one it displays the relevant quantity and allows me to edit the quantity.
Hi, I was wondering if it was possible to use a combobox where you could select a month and year (eg March 2004, April 2004) so I could run a query to find orders made during the chosen time period.
Does anyone have any ideas how this could be done?
I am trying to get my head around some of the more advanced “features” of access..
At the minute I am trying to change the criteria of a query from selecting a value from within a combo box.. I believe I have got the syntax correct, but I keep getting no results returned..
I am using: [forms]![frmMovies]![combo2] as the criteria where frmMovies is the name of the form, and combo2 the name of the combo box.. I have set combo2’s source as the table containing the movie information “tblMovies” Before you ask I am not trying to setup my own movie store, more apply the theory to a bigger DB that I am working on :-p
Hopefully you can help, as I have now been scouring the forums for 2 days and am getting no where..
i have a combo box containing dates, however it will only display the date at the top of the list, no matter which date is selected. any help would be gratefully excepted! cheers
I seem to remember that there is a way, in a combo box, of entering an entry that isn't displayed in the combo box, so that you can then process that entry into a form's underlying table?
I think the example of doing this was in the MS Samples database for either Access 97 or Access 2000.
Does anyone recall what I'm talking about? Second question, does anyone have a link to those sample databases? Our technicians didn't bother loading the samples for us, so I'm kinda stuck.
Thank you tremendously to any and all who reply..... I'm looking forward to your responses!
Is it possible to select more than one item in a combo box? I have attached a sample of a database I am working on. I have a table called Interests and on the Bookings form, I would like to be able to select more than one interest in the Interests combo box, but I can't figure out how to do it. In databases I have seen, you simply have to hold down ctrl or shift to make multiple selections - that's what I want to do.
I have an unbound combo (because it is synchronised with another unbound combo box) box that selects a record, but I can not get it to update the rest of the form to show the required data.
The form looks up project data from 3 seperate tables which are all linked by relationship.
Is it possible to have a combo box on a form and allow users to select multiple entries from the drop-down list? Thats just the tip of the iceburg. If you can, then I'll probably be asking more questions soon.
I have a combo box that has three items in it. Name, ID_Num, Date
I need to use ID_Num and Date to filter the results of query. I can use one or the other but not both. I have tried ListIndex but apperently am writing it wrong in the expression builder.
I have a main form frmProperty from where you can go via a button to frmTraining and these two are linked by "Property Code".
On frmTraining i have an unbound combobox which gets it data from the tblTraining table. I want this to only display data for the "Property Code" that the frmProperty is pointing to.
I assumed this would just work if the link criteria was present in the button code, however it appears that no matter what the "Property Code" the combo box displays all the data in the tblTraining table.
