If i open a form with a sub form on can i open it so that the focus go directly to a control on a sub form.I have tried to do it with a macro on the on open event to go to control but it comes up that the control don't exists on the sub form.i am using access 2010.
View RepliesI have a form with a subform on it. The subform has subforms. I need to set the focus on a control on one of the subforms. Here is what I am using.
START OF CODE
Forms!frmMain!frmMainSub.Form.frmContactLog.SetFoc us
Forms!frmMain!frmMainSub.Form.frmContactLog.Contac tMethod.SetFocus
END OF CODE
I use Code 1 to get to the third level. Code 1 works.
Code 1
Forms!frmMain!frmMainSub.Form.frmContactLog.SetFoc us
When I add the second line, Code 2, it doesn't work. I get the message "Run-time error 438: Object doesn't support this property or method."
Code 2
Forms!frmMain!frmMainSub.Form.frmContactLog.Contac tMethod.SetFocus
I have a single main form with a datasheet subform. When I scroll through the records shon in the main form, each has a different set of child records shown in the subform.
I want the focus to be on the last record of the subform each time.
On the main form, I have a button and this code
Code:
Private Sub cmdLast_Click()
Me.frmRevisionsSub.Requery
Me.frmRevisionsSub.SetFocus
Me.frmRevisionsSub.Form.txtRevTag.SetFocus
DoCmd.GoToRecord , , acLast
End Sub
which works perfectly, when I click the button.
If I call this code from main form's OnCurrent, focus remains on the first line of the subform instead of going to the the last. I have an inkling that it has to do with when the requery of the subform takes place, when I scroll through the records on the main form.
I have a form with a subform which is sized to show several records at the same time. If Record A has the focus, and I click anywhere in Record B, then Record B gets the focus, as expected. ... Except if I click on an Image field in Record B, when the focus stays on Record A.
How I can force it to set the focus to the other record ? I don't think this can be done with Events handlers, as they need to have the focus set first.
I have a form, with a subform,
When a user selects a record from the subform i use this to view the record in the main form
Private Sub Txt_Support_Name_Click()
DoCmd.ApplyFilter , "ID =" & Me.ID
End Sub
However when i select the record from the subform, it populates the form as required, however then the top record of the subform is highlighted.
Any way to either - highlight nothing, or highlight the selected row?
I have a form that I created that has a tab control. When the form loads, it automatically sets the focus to a field in the subform. This wouldn't be a problem, except when it does it hides the tabs at the top of the form so I have to go and scroll back up every time I click a tab so that I can see the tabs. Is there a way to adjust this? I have tried hiding a field and setting the focus to it and that didn't work. I also tried setting the focus to the actual tab, but that also did not work.
View 8 Replies View RelatedI am currently stuck on set focus property. I have a main from with nested subform. I am trying to move the focus from last field of the subform to another field on the main form.
Customers(mfrm)....>Addresses(sfrm)...>Orders(sfrm Add)......>OrdDetails(sfrmOrders)
Now I have a field name [Securedesign] in frmOrderdetails and I want the tab order to navigate to field [CustomerID] in frmAddresses which is a subform to frmCustomers.
I have 4 nested forms:
DataEntryMaster
DataEntryMainSub (subform on DataEntryMaster)
DataEntrySub2 (subform on DataEntryMainSub)
DataEntrySub3(subform on DataEntrySub2)
In the AfterUpdate even of DataEntrySub2, I have code that checks to make sure the field on DataEntrySub3 (it has only one field) has been filled in. If not, I want to set the focus to DataEntrySub3.
The code in the DataEntrySub2 afterupdate event:
if isnull(me!dataentrysub3.productbarcode then
msgbox "You must enter a product barcode!"
forms!dataentrymaster!dataentrymainsubform!setfocu s
forms!dataentrymaster!dataentrymainsubform!dataent rysub2.setfocus
forms!dataentrymaster!dataentrymainsubform!dataent rysub2!dataentrysub3.setfocus
end if
I've used this most-wordy syntax because I couldn't get the shorter syntax (eg, me.dataentrysub3.setfocus) to work at all. However, this STILL doesn't work.
What's really puzzling is that if I run those exact same 3 setfocus statements from the immediate pane, they work fine. But in the afterupdate event, my focus always ends up on a control in dataentrysub2.
Any ideas???
Well, the title says it all really. After I click into the subform and type something in a text box, the focus will not return to the parent form, via mouse or tab. I can't even switch the form back into design view, it appears to be totally locked. Has anyone run into this before?
View 4 Replies View Relatedi won't go into details except i am doing databases for cemeteries - very complicated
example
i have come across two people who have the same name, date of death, buried in the same grave on the same day but are not related and must have seperate records!!
my main table has 6 primary keys. [even then i have 2 duplicates who are not related]
anyway one of the problems is this
i have a main form with 2 subforms. the main form is unbounded. i need to copy information from 1 of 4 queries run by the main form [QBF] to one of the subforms. i don't know which query untill i view the data.
when i know which one, i press a command button which copies the information to one of the subforms. when i repeat the actions above instead on the new query data going into a new record on the subform it overwrites the existing data instead of pasting it into a new record.
i have tried setfocus command - this works only if i click on the subform and activate it [this defeats the object of the command as i might just as well click in a new record box on the subform].
in essence i do not need to activate this subform at all. i just need to check if a record exists and if it does goto a new record [again this works only if i physically click on the form]
any ideas how i can force the cursor to goto a new record without physically clicking on the subform??
thanks
When I click on my subform after entering some data in the primary form, I get this error message:
"The Microsoft Jet database engine can't find a record in the table <name> with key matching field(s) <name>. (Error 3101)"
This is because I have not filled in a ItemCode, a combobox, on the parent form and ItemCode is part of a one-to-many relationship that involves automatic filling in of other fields such as ItemDesc, UnitPrice, etc. How do I code the validation that handles such an error?
Thanks in advance,
Swee
Is it possible for an image control to change to a different picture on a form when focus changes to a different record on a subform? I am developing a simple database to record my ever growing collection of TV shows. The form that I use to view my TV show records has an image control on it, I previously had a single image for the entire series (box art for first season). I now want that image control to change to a different picture when the focus changes to a different record on the subform. i.e. when the focus changes from the first season on the subform to the second season; the picture on the main form changes with it.
View 7 Replies View RelatedI am trying to highligh a subform textbox a yellow color on focus. However it is highlighting every textbox in that field as it is a continuous form therefore they are all named ThisCount.
Is there a way to highlight just the specific textbox that I am in. I have tried.
Code:
Me.ThisCount.BorderColor =RGB(255, 215, 0) 'gold
Me.ThisCount.BorderWidth =3
and tried
Code:
Dim ctlCurrentControl As Control
Dim strControlName As String
Set ctlCurrentControl = Screen.ActiveControl
strControlName = ctlCurrentControl.Name
Set ctlCurrentControl = Screen.ActiveControl
ctlCurrentControl.BorderColor = RGB(255, 215, 0) 'gold
ctlCurrentControl.BorderWidth = 3
On a main form I have 2 sub forms. On the main form I have a command button that asks how many guests in a booking and depending on the response populates the subform with Guest Names. However it will only do this if I click on the subform and then click the command button.
I want to include some code that sits behind the command button on the main form that will duplicate the otherwise manual selecting of the sub form. And I am thinking this is a SetFocus procedure.
I have tried this code;
[Forms]![Booking].[SubForm1].SetFocus
where Booking is the name of the form. I do not know whether the Subform is #1
i have a button that allows you to "edit" the show that is selected. You can double click the show name from the list box, and it opens that show in viewing mode, but you cant edit it. You can click the edit show button in the form that you view the show with, but I want to be able to edit that show from the main form with the list box. But, the problem im having, is if someone clicks the "Edit show" button without have a show selected, they get a error.
If lstShows has focus Then
DoCmd.OpenForm "frmEventsEdit", , , "EventID = " & Me.lstShows
Else
'do nothing, since having no code here, it does nothing
End If
End Sub
That is what I want, but I cant get access to open that show up if its selected.I need to be able to tell if it has focus on it, and to open that selected show up.
This code stopped working without explanation after the longest time. I can't seem to fix it.
Code:
Private Sub Send_Letter_AfterUpdate()
Call Set_CallDateUserId
End Sub
Private Sub Set_CallDateUserId()
Me.txtCallDate.SetFocus
[Code] .....
I have a customer provide his or her SSN. If the SSN matches a record in a table the form opens specifically on that record (no problem). If the SSN doesn't match a record, the form adds a new record (again, no problem).
The issue I'm having is with the new record. The customer is able to scroll through other records (page up, page down), which is a no-no. I need the form to be locked on the new record. I've posted my code below.
Private Sub Command543_Click()
On Error GoTo Err_Command543_Click
Dim strCriteria As String
Dim rst As DAO.Recordset
Set rst = Me.RecordsetClone
[Code] .....
I have a parent form called "frm_job_enter"
and two sub-forms called "frm_fabricator" & "frm_engineer"
On the sub form "frm_fabricator" I have a combo box and after updating this combo box (called fabricator) I would like the cursor to jump into a field called “ApllicationsEng” on the other sub form "frm_engineer"
Any help would be appreciated thank you.
I have a continuous form with a combobox and a text box. In the after_update event of the combobox I want to setfocus on the text box - of the specific record that I'm on. I tried using Me.CurrentRecord but that returns me to a completely different record than the one I was on. How can I setfocus to the text box of the record I am on?
View 12 Replies View RelatedI have a subform that I use to scan in products using a barcode reader, when the item scans it moves to the quantity (Qty) field where I have this code:
Code:
Private Sub Qty_GotFocus()
Qty.Value = 1
DoCmd.GoToRecord , , acNewRec
txtOrderNo.SetFocus
End Sub
I am simply trying to set the Qty value to 1 and move onto the next record ready to scan another product in.
I have a Dynamic Search form, which I use to search for client, on the double click it takes me to the client, at which point I have the Forms Visible set to False.
When I click on a button to open that Form, the Visible turns back to True, however it shows my last search results, how do I clear it so that when I call it back up it is ready to search again, and my focus is set to the SearchFor box.
In a form, I go to a textbox with setfocus. The whole text is selected then. But how can I place the cursor after the existing text, so that I can begin writing immediately?
View 3 Replies View RelatedWhen the client clicks in a text-Box or Combo-box in a sub-form, the field seems to jump to the side. in this image it jumps to the left, but jumps to the right to..., it is quite irritating, especially attempting to open a combo-box list, and see the button jumping aside.We renewed the file many times, so I don't think it is corrupted, but go know..the file can be accessed via network or terminal server, the pic is from terminal, but happens via network too.
View 1 Replies View RelatedI am having trouble setting the focus on my forms... I have a parent form with two labels that are coded like this.
Private Sub Advisory Messages_Click()
Me![ Advisory Messages].Visible = _
Not Me![Advisory Messages].Visible
End Sub
[code]...
I have the visible property set to no on the subform allowing the user to toggle the visibility when the label is clicked. The problem though is when I click inside the subform to use the scroll bar to view records, it transfers the focus to the subform making it almost impossible to close by clicking the label again because the label is on the parent form. I found the "me.parent.setfocus" command and a few other set focus commands but I don't know what I should be applying the command to in order to make it work.
I have a form that allows me to update entries in a table. When I select the line I need to update and hit the "edit" button I get a run time error '2164' You cant disable a control while it has the focus. when I debug the line in the code that is highlighted yellow is
Me.cmdEdit.Enabled = False.
I developed the database in access 2013, and now I am forced to run the database on a computer that has Access 2003. I have changed the database base to access 2000-2003.
I have a toggle control on a form which depending on selection uses a loop and instr to make 'not visible' a set of controls on a subform.(forms! Mainform !subform.form)I get error 2165 but if I test immediatley before the make not visible process it returns the toggle frame as being the active control.
View 3 Replies View Related