Forms :: Set Form Property To Window In Database Set To Use Tabbed Documents

Oct 16, 2013

I'm using access 2010.

How to set a single form's property to act as it's own "overlapping window" in a database that is set to use tabbed documents. I want most windows to have the tabbed layout but there are a few that I would like to have pop out and be their own windows.

I noticed that the Northwind database did this somehow. if you click on one of the products from the home screen a form pops up in its own window. I tried reverse engineering it, but no luck so far.

View Replies


ADVERTISEMENT

Forms :: Tabbed Documents Icon On Caption Bar

May 25, 2015

Customizing the form with the following code

Code:

Public Declare Function LoadImage Lib "user32" _
Alias "LoadImageA" _
(ByVal hInst As Long, _
ByVal lpsz As String, _
ByVal un1 As Long, _
ByVal n1 As Long, _
ByVal n2 As Long, _
ByVal un2 As Long) _
As Long

[code]...

I can load the little icon on the left on CaptionBar.It works very well on overlapping mode but no on Tabbed documents. How to works with tabbed documents mode?

View 9 Replies View Related

Forms :: Mixing Forms Overlapping Windows And Tabbed Documents

May 22, 2015

Is there any way to mix together on a db based on tabbed documents some overlapped forms?

View 4 Replies View Related

Freezing Header Of A Form In Overlapping Tabs Instead Of Tabbed Documents

Feb 16, 2015

I have a form (frmMain) which has a header with some basic links and text boxes I would like to keep as a frozen pane on top as the user are scrolling down the detail section of the form. The detail section does include a subform if that makes a difference (frmhome). When going to Options>Current Database> tabbed documents, the form header stays frozen perfectly.

I however would like to use "Overlapping windows" as the form center aligns in the Access window instead of left aligning when using "tabbed". So either :

1) how do I keep the header frozen in "overlapping" or
2) how do I center align the form in "tabbed" view, as right now the form just wants to go as far left as possible in the full Access window.

View 1 Replies View Related

Forms :: Access 2013 - Adding Cross Close Command On Tab In Tabbed Documents Mode

May 25, 2015

I would like to add a cross close command on the tab in tabbed documents mode. Is it possible to accomplish?

View 2 Replies View Related

General :: Order Of Tabbed Documents

Oct 17, 2012

Because of certain design considerations and the amount of data I'm maintaining, I have chosen to use tabbed documents rather than floating windows or subforms.

The hierarchy is supposed to be a person who is categorized as either a client, family member, donor, etc. Further, a client may use one or more services. In the example, our client uses Specialized Home Care. However, the tabs are intuitively out of order: the people tab is left-most, followed by the Specilaized Home Care tab, and lastly the Client tab. It should be People, People:Client, People:Client:Service. If a person uses a lot of our services, there will be separate People:Client:Service tabs and the People:Client tab will scroll off to the right. I'd like Access to order them properly but see no way to do it.when the forms are opened, it's people first followed by the high-level classification (i.e. Client), and the lastly the specific Client:Service tabs. I would expect Access to open and display them left to right, but, as you can see, it doesn't.

View 7 Replies View Related

Hide Property Window

May 29, 2006

hi guys,
easy question.
when the DB is open a login form comes up. The issue is that the properties window for that form comes too.
any suggestion? thx max.

View 3 Replies View Related

Forms :: Hyperlink To Tabbed Form

May 5, 2015

I've set hyperlinks to a couple of forms using the hyperlink address in properties. All works fine, and I've done it this way because the cursor changes to pointy hand when hovering over.

However, I need to navigate to a tabbed form in a main form.

Is there a way of doing this? I've been searching all sorts, and the most probable is to concatenate the destination?

description##Page1#page2... or something like that?

Is this correct?

What ever I've tried doesn't work, this includes ...

adding the main form destination to Hyperlink Address, and tabbed form in the SubAddress (Can't find main form)

Using the hyperlink builder. (Can't find anything)

Objects in this database (Only one form).

View 4 Replies View Related

Forms :: Populate A Tabbed Form With A Different Record On Each Tab?

Sep 28, 2014

how to populate a tabbed form with a different record on each tab?

View 3 Replies View Related

Forms :: Linking Several Tables On Tabbed Form?

Oct 6, 2013

I want to have a navigation Form where the top tab will show the main Customer, and in the same tab also a sub table with chosen contact information.

With that top tab chosen, I want to chose left tab wich shall open (in this example) the phone number of that contact.

I provide a PDF with a few pictures of tables, relationships and how I want the forms to look.

View 5 Replies View Related

Forms :: Date Difference In Tabbed Form

Mar 10, 2014

everything has been working perfectly except for date diffs.I am simply using an unbound text box with a date diff as a calculator of sorts, which meets the form's purposes. Everything works fine when the two dates are on the SAME tab using the formula ' =DateDiff("d",[DOB],[date of treatment]) ' entered in the textbox.

The number of days between treatment and DOB pops up immediately.

However, when trying to create a second date diff between two source text boxes on SEPARATE tabs, (i.e. DOB on Tab 1, and date of treatment and the unbound date diff calc box on Tab 2) the date diff does not work unless the form is opened, and closed again. As in, the only time the number of days pops up is if the form is closed and opened again.

View 3 Replies View Related

Forms :: Navigating Fields In Tabbed Form

Jan 22, 2014

I have a form which consists of four (4) tabbed sheets. The first sheet is the main form and the other three sheets are the linked subforms.

Pressing the tab key on the keyboard navigates from field to field in each individual form; however, I would like that when I get to the last field of each form, pressing tab moves to the next sheet or the first field of the next subform.

The problem I am getting is that when I get to the last field of the main form and/or subforms, hitting the tab button creates a new record in the specific form, which I do not want. I want to just tab to the next subform.

View 14 Replies View Related

Forms :: Unbound Form With Tabbed Controls?

May 31, 2015

I have an unbound form with 2 tabbed Controls on it.On the first Tabbed Control my command button code works but not for the 2nd tabbed control. Although the command buttons themselves work as far as going to the appropriate record.

What I mean by this is that I use code to enable/disable the command buttons depending on what record you are on.

Example: If there is only 2 record, the other command buttons will be disabled, Do I have to refer to the Tab Control ?

View 1 Replies View Related

Forms :: Tabbed Form Validation Before Switching Tabs

Mar 20, 2013

I have a tabbed form built in Access 2007. It's a series of about 32 different questions, with some being fill-in, some drop down boxes to select from, some radio buttons to choose a rating from 1 to 5. The reason I used a tabbed form was just to keep things consolidated on one screen where no scrolling was involved. All of the entries on each of these tabs are deposited into the same single table. I have 7 tabs, and all of the fields on the 7 tabs compose a single record in the table.

I have the actual tabs hidden, and instead use a button to switch to the next tab (Continue button at the bottom) once all the fields on that tab have been completed. I have all of the necessary fields set to be required, but Access does not validate the entries until the very end of the survey when they click a 'submit' button that actually saves the responses and returns to the opening splash page to start the survey again.

What I want to happen is for the fields on the current tab to be validated before it lets the user move to the next tab with the continue button. If they click continue and have left any fields blank they should get a message that all required fields must be completed or something similar to that.

I have found a thread here entitled "Form Validation before Moving to another Tab" which sounds similar to what I'm doing, but using the button method to navigate to the next tab, there is no BeforeUpdated event to assign that code to.

View 9 Replies View Related

Forms :: Combine 3 Forms Into 1 Tabbed Form

Sep 5, 2014

I made a form for our office to search data through our MS Access database. It was a big hit, and people started using it. Then came another request to make a new form - to search through another few tables. This was a big hit too.

The same process repeated and now I am stuck with 3 different forms, each with it's separate code and selection options.

How can I combine all of them into one and have 3 different tabs for the 3 existing forms without losing all the coding and software flow that I have already created?

View 6 Replies View Related

Database Window Shows After Printing Form

Feb 16, 2005

Hello team,

My database window is hidden.

I have a form with data about an article. When I click a button, another form opens showing a sales graph of that article.

On the form with the graph, I have put another button to print it. The code behind that button is:

Private Sub printpriceevolution_Click()
On Error GoTo Err_printpriceevolution_Click

Dim stDocName As String
Dim MyForm As Form

stDocName = "frm_priceevolution"
Set MyForm = Screen.ActiveForm
DoCmd.SelectObject acForm, stDocName, True
DoCmd.PrintOut
DoCmd.SelectObject acForm, MyForm.Name, False

Exit_printpriceevolution_Click:
Exit Sub

Err_printpriceevolution_Click:
MsgBox Err.Description
Resume Exit_printpriceevolution_Click

End Sub

The funny thing is that after the printing (which works fine) my database window is shown, where it is supposed to be hidden.

Any idea what could trigger this? Does it have to do with pop-up dialog box settings?

Thanks

View 1 Replies View Related

Forms :: Adding Subform To Main Form As Another Tabbed Page

Jun 25, 2013

I am modifying an existing form that has some tabbed pages(subforms) in it and I am wanting to know how to add another page. I have created another subform that I am wanting to add to this main form as another tabbed page.

View 1 Replies View Related

Forms :: Duplicating Tabbed Form And Change Record Source

Aug 7, 2014

I have a navigation form that has a tabbed form on one of its tabs. The tabbed form has a 'current client' query record source and allows one to choose from a list of current clients and when a client is selected - details relating to client are displayed on various tabs on tabbed form.

I want to duplicate tabbed form and change record source to a query selecting 'exited clients' so I can see same information but for exited clients.

I have created a new tab on navigation form for my new exited clients tabbed form and changed record source by creating a new exited client query but when I change record source on exited client tabbed form it automatically changes record source of current client tabbed form to the exited client query and visa versa.

View 3 Replies View Related

Modules & VBA :: Form Window To Popup On Opening Database

Dec 4, 2013

How I configure my Form Window to pop up as soon as I open my Access Database?

View 3 Replies View Related

Forms :: Creating Tabbed Form In Access 2007 - Control Alignment?

Mar 29, 2013

I'm creating a tabbed form in Access 2007, and in the first 3 tabs, when I dragged the field controls onto the form, they stretched to the width of the form and all stacked nicely underneath each other.

Now on the next tab they are coming out as much smaller. I don't want to stretch them to fit as I want them a uniform size and I just want to find how to get that setting back! I've been messing with the anchoring buttons to what seems like no avail!

View 2 Replies View Related

General :: Database Window Becomes Inactive And Cannot Open Another Form / Report

Aug 17, 2014

I have just noticed when I open one of my forms . the database window becomes inactive and I cannot open another , form , report etc.

View 2 Replies View Related

Forms :: Default Property / Using A Control Of Main Form Without Using Names Of Forms?

Nov 8, 2013

In the default property of a subform control I want to use a control of the main form without using names of forms, but using me and parent.

I used in default property of cboVATDetail: =Me.Parent!cboVAT, but it is not accepted. My aim is to use cboVAT of parent as default in cboVATDetail of child.

View 3 Replies View Related

Forms :: How To Check For TOP Property Of Form

May 25, 2015

I've saved a form to an text file to investigate a corrupted form issue. The output text file has below extracted text. I am wondering where I can find the TOP, RIGHT BOTTOM property of the form in design time? I could see some properties such as GridX, GridY, but not sure where are TOP property.

Version =20
VersionRequired =20
Checksum =-1566200859
Begin Form
RecordSelectors = NotDefault

[Code] ....

View 3 Replies View Related

Forms :: Set Where In The Window A New Form Will Appear

Apr 2, 2014

I have a pop-up form that is coded through VBA to open on certain button clicks. I would like this form to always open in the top-left corner of the window. For the life of me, I can't find anyway to specific in access where the form should open when called...

Is there a way to specify this? Or does access simply determine that itself? (arbitrarily it seems...)

View 1 Replies View Related

Forms Are Opening In Same Window / How To Open Forms In Different Window

Oct 21, 2013

My application is developed in Access 2003 version. Recently we moved from Access 2003 to Access 2010. Now users are facing usability issues like - in Access 2003 all the forms are opening in different windows and they can move to forms easily. But in Access 2010 all the Forms are opening in same window, if they want to move to different forms then they need to close the current window or press ctrl+F6. How can I enable/open forms multiple window in Access 2010.

View 3 Replies View Related

General :: Creating Database For Indexing / Organizing PDF Documents

Mar 19, 2013

I would like to Create a database for indexing / organizing PDF documents. My Company currently use a 3rd party accounts program and we raise sales and purchases using numerical numbers ( but we can Jump to a new range of numbers within the program) for example if the purchase order numbers become simliar to the sales order numbers. But this 3rd party software does not let us scan documents into it hence the need for an alternative database.

For the data base I was thinking if only creating a index of the sales order numbers to start with. the first few question I have are.

1.) Should I Use the Autonumber as my first index column or should I replace it with our own sales order numbers in that column.

2.) is there a way to autopopulate the sales order numbers in a table for historical sales numbers.

3.) can you scan directly into Access

How to start planning the design off the database as I know this is almost the most important aspect of a database.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved