Forms :: Setting Text Box Format To Short Date And Optional Short Time
Jun 21, 2013
I want to be able to set text boxes so that if one enters a date and a time it displays in the format "dd/mm/yyyy hh:mm", but if one just enters a date is displays in the format "dd/mm/yyyy". Is this possible?
Stipulating "dd/mm/yyyy hh:mm" means that when you just enter a date it adds "0" values for the time e.g. entering "21/6/13" gives "21/06/2013 00:00".
General Date allows for an optional time, but it means that when you do enter a time it gives you seconds as well "dd/mm/yyyy hh:mm:ss" - and I don't want that.
View Replies
ADVERTISEMENT
Dec 9, 2004
Hello again,
I think my subject heading explains it. How would you add or subtract two short time formatted values and produce a short time value? Also, how would you change a short time value into number minutes. (i.e. 5:30 into 330) Thanks!
G
View 1 Replies
View Related
Aug 14, 2014
I have two fields that are in short time format, and are saving the information to the table in short time format.
I then have a field that I have set to auto-fill under the chosen circumstances, with a text roughly as follows
Code:
Dim Story As String
Dim IDepTime
DimADepTime
IDepTime = [InstructedDeparture]
ADepTime = [ActualDeparture]
Story = "This person was instructed to leave at " & IDepTime & " but did not do so, instead departing at " & ADepTime & "which caused us a problem"
me.txtnarrative.value = Story
End Sub
This all works, however the times being displayed are in hh:mm:ss format, when I only want hh:mm format - how do I tell it the format I want?
View 1 Replies
View Related
Jan 17, 2006
I have a query where one field is Date:Now() so that todays date is forced in. However, it is giving me the date and time. I only want the short date, how do I achieve this???
Thanks!
View 2 Replies
View Related
May 23, 2006
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still shorttime but when you read the time within the code it comes out in AM/PM format. Also, when the defaul tiem should be #20:00:00# but this changes to #8:00:00 PM#
Weirdly though, when you just open the table, the times are in the correct shorttime format.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
This screen shot may help:
View 2 Replies
View Related
May 23, 2006
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still short time but the format is in AM/PM or medium time.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
View 1 Replies
View Related
May 14, 2013
I have a totals query that displays the sum of what products we ship each day. A process in the system automatically assigns the date/time to a ShippingDate field when an item is marked as despatched.
The totals query allows users to view what products are shipped between a period specified by the user.
The problem I am getting is that when the user inputs dates into fields [txtStart] and [txtEnd], the query fires up but will not display any records as a start time 00:00:00 and end time 23:59:59 was not input.
I don't want users to have to do this but cannot think of a way around it. My criteria code in the query for the shipping dates is
Code:
Between [Forms]![Switchboard]![txtStart] And [Forms]![Switchboard]![txtEnd]
Can I append the start / end time onto the code above somehow or is there another method I can utilise that is probably so glaringly obvious I have missed.
Usually a query allows me manipulate a field property sheet but in this case there is nothing obvious to select like format.
View 2 Replies
View Related
Aug 22, 2005
I have some project run on MS-Access as front-end with database linked to MS-SQL Server. I have some column of table contain Date-Time data that store data as General Date format (ie 01/01/2005 08:00:00). I create some form for my staff to key in a data of lab test that they will be key in only time with out date value. On form, I show this value as time only too. But I want to use this data with Date value for some calculate as backgroud process.
So...
In case of new data, Database will be store my data as CurrentDate with Time that my staff key in.
In case of data update, Database will be store my data as ExistDate with Time that my staff may update.
What should I do for solve my problem?
View 1 Replies
View Related
Aug 22, 2005
I have some project run on MS-Access as front-end with database linked to MS-SQL Server. I have some column of table contain Date-Time data that store data as General Date format (ie 01/01/2005 08:00:00). I create some form for my staff to key in a data of lab test that they will be key in only time with out date value. On form, I show this value as time only too. But I want to use this data with Date value for some calculate as backgroud process.
So...
In case of new data, Database will be store my data as CurrentDate with Time that my staff key in.
In case of data update, Database will be store my data as ExistDate with Time that my staff may update.
What should I do for solve my problem?
View 2 Replies
View Related
Jun 22, 2014
i have a problem i have field contains (minutes as number) like 5750 i want to convert thes minutes to short time hh :nn to be 95:50
View 3 Replies
View Related
Oct 9, 2014
Select * from Table where CDate(CStr(Nz(AnnouncementDate,0))) >=CDate(10-10-2014) and CDate(CStr(Nz(AnnouncementDate,0))) <= CDate(01-10-2014);
Here AnnouncementDate Column is Short Text
It gives me a type mismatch error..
View 3 Replies
View Related
Jul 7, 2014
Most my short text fields on my form are normal, but some have scroll buttons like a memo box and it's annoying, especially because the user can't jump to the next field by pressing return.
How do I make them normal?
View 10 Replies
View Related
Jan 5, 2008
I'm trying to refine another of my time entries. To enter a Short time (eg 10:35), I have to type in the four digits AND the semi-colon in the middle.
I would like to be able to enter only the four digits with Access making it into the correct format.
I have achieved a similar effect in Excel using code like
TimeVal = Left(Value, 2) & ":" & Right(Value, 2)
I tried writing something similar in the Before_Update Event, but it was rejected!! Any ideas? - Thanks, Andrew.
View 5 Replies
View Related
Feb 26, 2006
This must have been answered before, but I can't find it by searching so sorry for the dumb question.
I input a time in hours and minutes in a field with a Short Time format. I would like then to convert this to seconds in a field with a number format so that I can total the seconds and then add them to the results of a calculated DateDiff control to get the grand total of time spent on a project.
Any help would be gratefully received.
Cheers
Rob
View 2 Replies
View Related
Apr 2, 2008
I am trying to add hours entered in a short time format. For example 08:15 or 02:55. I also would like it to give a total number of hours beyond 23:00. Here is a table with a Name Column and Hours Column
Name Hours
BETTER,HEATHER 8:00
BETTER,HEATHER 8:00
BETTER,HEATHER 5:41
BETTER,HEATHER 2:35
BETTER,HEATHER 1:15
WILLIAMS,R 2:30
WILLIAMS,R 0:45
WILLIAMS,R 11:20
WILLIAMS,R 8:25
WILLIAMS,R 8:15
WILLIAMS,R 10:20
How do I
A) write a query to add up the hours. I believe Heather would total 25:31 Hours.
B) Show this same total in a report? In my report I had a Name Footer which showed "=Sum([hours])". Will this work once the query is right or will I use the "=Sum([totaltime])"?
Also, is it possible for you to respond in a SQL statement so that I can copy? Thanks.
View 6 Replies
View Related
Feb 12, 2014
How can I convert a number format into a short time format?
View 3 Replies
View Related
Mar 8, 2006
I've set up a query to calculate the difference between 2 time fields. I set the property to short time.
The thing is - when I run the query in a Select query, the times in the column which contains the difference, appear correctly : ie hh:mm, but when I run the same query in as a make table query, the time difference field (although I have set the property to short time) appear something like this:
0.664464564646
Can somebody please tell me how to make it that the time difference results field in my make table query appears as hh:mm??
Thanks in advance - nelld
View 1 Replies
View Related
Nov 17, 2005
Is there a way to assign some short cut controls that will insert certain text into the field the cursor is in? For example, is there a way to assign "No mustard" to Alt-M?
View 2 Replies
View Related
Dec 5, 2007
Hi all
I have a database I built for my employers that is accessed by up to as many as 50 users at one time. It is a relational database. I did a compact and repair this morning which changed the BE from 215MB to 45MB. I went to lunch and came back and the database is now 58MB. Does anyone have any ideas as to why it has increased by 13MB within an hour? There is no way this is caused by geniune data records.
Thanks
Gareth :eek:
View 8 Replies
View Related
May 23, 2007
I'm having issues querying a short date field in my database as it returns no data no matter how i format the date
SELECT * FROM Maintenance_Dbf
WHERE [Date Logged] = #$date#
ORDER BY Maintenance_ID ASC
$date has been set to:
2007-05-21
2007-21-05
21-05-2007
05-21-2007
07-05-21
07-05-21
21-05-07
05-21-07
2007/05/21
2007/21/05
21/05/2007
05/21/2007
07/05/21
07/05/21
21/05/07
05/21/07
and no joy
If i use this on a medium date field it will work fine??
Regards
Liam
View 3 Replies
View Related
Nov 5, 2014
I have the following code that creates a long string that works most of the time but sometimes gets cut short. I can't understand why it does this. When it cuts the string short it cuts it short in the same place. Everything gets in the string up to/or about the following code '</Practice Name>'This string is needed to upload info to a server.
Code:
dim msg as string
msg = "<?xml version=""1.0"" encoding=""utf-8""?>" & vbCrLf & _
"<soap:Envelope xmlns:xsi=""http://www.w3.org/2001/XMLSchema-instance"" xmlns:xsd=""http://www.w3.org/2001/XMLSchema"" xmlns:soap=""http://schemas.xmlsoap.org/soap/envelope/"">" & vbCrLf & _
" <soap:Body>" & vbCrLf & _
" <UpdateDataForScreens xmlns=""http://mdtoolboxrx.com/"">" & vbCrLf & _
" <PatientObj>" & vbCrLf & _
[code]....
View 10 Replies
View Related
May 23, 2007
Hi im having issues runing a query on a short date field in my works database calls [Date Logged] I am actually running the query from PHP/ODBC but have tryed running it in acess also..
I am using this query:
SELECT * FROM Maintenance_Dbf
WHERE [Date Logged] = #$date#
ORDER BY Maintenance_ID ASC
Where $date is i have replaced with all of the following date types..
2007-05-21
2007-21-05
21-05-2007
05-21-2007
07-05-21
07-05-21
21-05-07
05-21-07
2007/05/21
2007/21/05
21/05/2007
05/21/2007
07/05/21
07/05/21
21/05/07
05/21/07
yet i cant get any results returned..
Here is an example date from RAW tables 26/04/2007 12:25:33
Any idea's? even the query builder in access doesn't pull up any records :S
Regards
Liam
View 3 Replies
View Related
Aug 11, 2006
I have a field defined as Date/Time Short Date which shows values like 8/01/2006, 8/10/2006, etc and I need to select dates in a range.
However, when I write a query with code like:
SELECT AMOUNT
FROM INVOICE_TBL
WHERE PICK_UP_DATE BETWEEN 08/01/2006 AND 08/31/2006
It doesn't pick up the records I also tried >= <= with the same results.
Any help would be appreciated.
Thanks,
Steve
View 2 Replies
View Related
Jul 31, 2013
What is the difference between "short text" and "long text"? Both seem to have 255 characters limit. I have Access 2013, and I found a solution, that you can use Memo instead of Short text. But the problem is, that there is no "memo" data type in Access 2013. So that won't work for me.
View 8 Replies
View Related
Oct 13, 2006
Hi folks - I saw a thread last week re how to extract the year from the date field possibly using date serial but can't find it can anyone help - it is probably very simple but i can't get it to work.
Ta
Humph
View 2 Replies
View Related
Oct 13, 2006
Hi folks - I saw a thread last week re how to extract the year from the date field possibly using date serial but can't find it can anyone help - it is probably very simple but i can't get it to work.
Ta
Humph
View 2 Replies
View Related