I just need a quick, simple expression that I can copy and paste into the input mask for a control that I have on a couple of forms that prevents someone (me) to continue tabbing to the next control if the value entered is a duplicate.
View RepliesI have recently started working for a new company and have inherited a nightmare of a system!
I have basic knowledge of Access and have been asked to stop duplicate entries under the same PO Number.
I have tried using DLookups by looking at other posts on the forum with no success.
The input form is called Purchase Order Entry, with the field called PO_No. The table is called Orders, with the field called Purchase Order Number.
I have tried to make the Purchase Order Number in the Orders table, the primary key but an error that it cannot contain a null value appears.
The Purchase orders may not be entered into the database in numerical order also.
I have a date field on my form and used
Input Mask L<LL-0000;;* and
validation rule <=Date$()
I want the user input to look like 'Aug-2010' for example.but I get error: The value you entered isn't valid for this field
I'm trying to apply a custom input mask to a text box control. The text box must contain a 43 character string, broken into sections as follows :
AAAA-AAAAA-AAAAA-AAAAAA-AAAAAAAAA-AAAAAAAAAAA-AAA
(The format is quite strict and always comprises alphanumeric characters , hence I figured an input mask would, if nothing else, support the user to key the string accurately from its constituent parts...)
However, when I try to apply the input mask to the text box, I seem to run out of characters - I get as far as the below but the input mask wizard won't let me extend the mask to the final 8 characters
AAAA-AAAAA-AAAAA-AAAAAA-AAAAAAAAA-AAAAAAAAAAA-AAA
Are input masks restricted to 35 characters in length? And if so, how else could I make this, admittedly complex, text input more manageable for end users?
I have a form (Access 2007) that requires user to enter a date.
Using the standard date field (short date format) with the date picker works fine however some users prefer to enter the date via the keyboard (some prefer the date picker).
If I set an input mask (to facilitate keyboard entry) for the text box then the date picker disappears.
Is there any way to apply the date picker and the input mask to the control to accommodate all users?
I want create a from with a "Part Number" text box .
After I enter a Part Number into the text box ,
other text box at below will automatic come out the detail about the Part Number I typed in .
Extra :
my part number is something like this : 00-00000-00 ,
how to convert to input mask ?
I have to add an Input Mask or force the user to enter in a specified format in a text field. The condition is, text should start with "A" or "T". The complete format is A-12345-67890 or T-12345-67890.
View 3 Replies View RelatedI am trying to change the standard input mask violation error message to a personalised one. I have found this code:
Private Sub Form_Error(DataErr As Integer, Response As Integer)
Const INPUTMASK_VIOLATION = 2279
If DataErr = INPUTMASK_VIOLATION Then
MsgBox "There was an input mask violation in the field no!!"
Response = acDataErrContinue
End If
End Sub
However, i would like to change the message for a number of different text boxes. and i don't know how to isolate each one, and give each one a different message?
I am attempting to make a system where the lifespan of baskets in a production process can be tracked. In order to do this I am looking to create a form to input when a new basket is introduced.Each basket has a 'disc' associated with a number on (BasketNumber), however these discs are reused once the basket breaks which is making it more difficult.
I have a form (Add_New_Basket) which feeds into a table (Active_Basket); what I am trying to do is make sure that a new basket cannot be introduced with the same disc number as an active basket. The way I am trying to determine which baskets are active is that I have an end date, that is filled in once the basket has been scrapped.
Therefore I am trying to set my Add_New_Basket form to restrict me entering a new record with BasketNumber 999, if there is already a BasketNumber 999 in the table with 'EndDate' null. If there is BasketNumber 999 and EndDate is dd/mm/yyyy then it can create the entry.My form Add_New_Basket has fields ID (which is hidden), BasketNumber, StartDate (=Date()).My table has fields: ID, BasketNumber, StartDate, EndDate
If different people will be entering data into a "new donor" form, how do I keep them from adding the same person a second time?
It's possible people could have the same name, and it's possible that two people at the same address could be donors. So I assume I would want a "no duplicates" on the combination of name and address, right? But how to actually do that.
I have tried the code below, but I am not getting what I need. I have a table [Student Info] with a field [Student ID] as the primary key and many other fields. I added the Student ID field to my form, [Student Add]. When I input an ID that already exists I get an error code as expected but then my form still loads. I currently have a second form for updating student info [Student Update] for which I have a parameter form that asks for the Student ID. I would like to use just one form to add and update students if possible. So, if you add a new Student ID you can enter all pertinent data. However, if you enter a duplicate Student ID the form should populate with that student's information.
If I must have two forms (1 to add and 1 to update) and a duplicate Student ID is entered into the Add form, the user should get a message stating that the record already exists. Then, (Option 1) force the Add form to close without saving or (Option 2) give an option for opening the Update form. Either option is acceptable at this point because I am stuck.
When attempting to use the code below, I get a data mismatch error on the "Answer = DLookUp......" line.
Here's one I use on Social Security numbers for a pop up when a duplicate....
SS# is stored in table "tblApplicant"
Private Sub SocialSecurity_BeforeUpdate(Cancel As Integer)
Dim Answer As Variant
Answer = DLookup("[SocialSecurity]", "tblApplicant", "[SocialSecurity] = '" & Me.SocialSecurity & "'")
If Not IsNull(Answer) Then
MsgBox "Duplicate Social Security Number Found" & vbCrLf & "Please enter again.", vbCritical + vbOKOnly + vbDefaultButton1, "Duplicate"
Cancel = True
Me.SocialSecurity.Undo
I would like to know what the best way to input a duplicate record is with the exception of 1 field that is used to correspond with the proper parent of the record?
Here is an example of the problem, We receive a letter with pertinent information that corresponds to 30 of our facilities. I would need to enter this 30 times so that when the users of this information run their reports for their facility I can ensure that the letter would be referenced.
HOW DO I DO THE FOLLOWING:
I want to use input mask in my email field i.e the @ must be present but i must be allowed to input values or numbers before and after the @. This did not worked because i have fixed the values: ????@????
thanks
Dear All,
Is there any way that I can use an input mask to enter serial numbers of softwares.....
the data will be like this...
ABC8F-CHJ68-FH76F-GHF87-67JH5
Thanks in advance
Thanks
What I have is field called contract number, and its entered as 09-0011, which is ok.
Now I like it to show up in a different field as 090011. I guess my first question can this be done. Or even better how would I do it?
Now your question is. Why don't you put it in correctly the first time, and the answer is we want the number to have a dash.
Any suggestions
Never can be easy for me.
let's say i have a field, in which i store and identity card number. This number may consist up to 7 digits (of which 3 are mandatory) plus 1 letter (mandatory) at the end. Thus a valid identity card number may be the following: 1234567M, 123M
Eventually, since the field must always contain a letter, i set the data type to Text with field size of 8 ... and i set the inout mask as follows:
9999000L (since the first 4 digits are mandatory). With this input mask, if i have an ID Number of 123M, i have to input it as 0000123M.
Although, I would like to have the leading zeros, is it possible that during data entry time, i would simply type 123M, and i will get the zeros automatically, after the field loses the focus, rather than having to type them myself ?
Thank You
Trying to set an input mask to Capitalize the first letter of a surname but also to do this for ie MacDonald or O'Brian? How can i do this?
View 1 Replies View RelatedWhen you add a new column you can select different data types such as text, memo, currency,...
When I pick currency and typ in 12345 in the column and press tab it automatically puts the € sign behind 12345.....
I am trying to create an input mask for a name field. I have Spanish names with two last names separated by a hyphen, a comma after the two last names, a space, and then the First Name a space and the Middle Name. The First Last Name needs to be in all capitals like the example. Example: NARANJO-Ramirez, Jose Luis
Can someone please help me format this mask. One trick is that there aren't always middle names. Since all parts of the name are different lenghts for everybody, I need to have an optional number of characters for each of the four parts of the name.
Thanks for your help.
I have a text box on a form that holds a grid reference, (2 letters and 6 numbers). I have set the box up with an input mask, (>LL000000;0;_). Is there a way that when the user clicks in the box that the cursor will go to the start of the box. At present it goes wherever they click in the box. If they dont notice then the machine starts beeping at them, most annoying!
View 1 Replies View RelatedI have created an input mask but it depends what type of currency is..
If Me![Currency Counter] = "1" Then
Me![Serial No].InputMask = "LL00 000000"
Else
If Me![Currency Counter] = "2" Then
Me![Serial No].InputMask = "LL-00000000-L"
endif
endif
The problem is that if for example the currency counter = 2 the serial must be
AA-11111111-A but it is saving AA1111111A and i dont want it to save it like this.
Any help pls...
I have a text box that has an Input Mask setup. The box is format to be
##-### (00-000;0;). My problem is, when the user clicks in the box it does not start at the beginning, it starts where ever the user clicks inside the box. Is there way to for when you click inside the box it automatically starts at the beginning?
I have a text box that has an Input Mask setup. The box is format to be
##-### (00-000;0. My problem is, when the user clicks in the box it does not start at the beginning, it starts where ever the user clicks inside the box. Is there way to for when you click inside the box it automatically starts at the beginning?
I have a table that I copy into daily from a shared Excel spreadsheet. I am trying to minimize the amount of touching up the data needs. What input mask should I use so that a field with four numbers...1234 (for example) will be converted to a nine-digit number with leading zeros (000001234) when the data is imported. I would like the nine-digit number to be saved.
Also, is there a way to have a date field import the date only & ignore any text?
Hiya everyone,
I'm try to do a database for items with part numbers.
& I want to be able to set the field to only accept data which has two letters at the begining, but any other characters after that (no fixed size).
ie.
part num1: pn047589sdf8m3
part num2: pn6583
part num3: pnfdgmj5973m
part num4: pn-fdgmj-5973m
Is this possible to do?
Cos all I can do at the moment, is to put a fixed number of characters.
ie. is the field size is 30characters
then I'd have to do this:
>LLCCCCCCCCCCCCCCCCCCCCCCCCCCCC
but this isn't good.
I just need something like:
>LL*
* mean any character for as many characters in length.
Adam
BIGmrC
I am working on a membership database that only has members from Canada and the United States. In the zipcode field, is it better to have two seaparate fields or is there an input mask that can handle both US and Canadian zip codes.
Thanks in advance.
24t42