Forms :: Splitform View - No Record Selected

Mar 7, 2013

Access 2010

I have a bound form (splitform view) with the code

"DoCmd.GoToRecord , , acLast"

on the Form_Open event. When I open the form it does go to the last record and shows all the data that are in (some of the) fields. I cannot however manipulate the record until I click on the navigation buttons in the bottom of the form. It also doesn't show which record ("34 of 34" for example) is selected.

How I can get it to open the last record and let me manipulate it directly on open?

View Replies


ADVERTISEMENT

Starting Datasheet View At Selected Record

Oct 13, 2011

I have a simple form in datasheet view in Company Name sequence. By default it starts the list at the beginning. I would like to put a combo box in the form header that pulls down the companies to allow the user to select the starting company to list. I don't want to go directly to the selected company, I just want the list to populate starting with the selected company. I can create the combo box and I know I use the After Update event to get the selected value, but how do I restart the list. Ideally, I would still like the operator to be able to scroll up and down after the list is redisplayed starting with the selected company.

View 2 Replies View Related

Forms :: Display Donation Details In Datasheet View Of Fund And Amount For Selected Date / Donor

Oct 31, 2013

I have two related tables

1 Donor and
2 Donations with fields date, donor, fund and amount

I want a form to display donation details in datasheet view of fund and amount for a selected date and donor...

View 14 Replies View Related

Forms :: Double Click Event - Form Showing 1st Record Instead Of Selected Record

May 8, 2014

I am new to access and I recently encountered a double click issue

My form loads perfectly on double click event but it shows the first record instead of selected record.

My search is based on a PersonID but each PersonID has different WorkID that I wish to display on double click but it always shows the first WorkID instead of my selected record

I have tried changing the filters in the form properties but it still doesn't work for me.

Here's my code:

Private Sub SearchResults_DblClick(Cancel As Integer)
DoCmd.OpenForm "WorkForm", , , "[PersonID]=" & Me.[Searchresults], , acNormal
End Sub

[Searchresults] draws information from my Query

Query information:

PersonID... WorkID... Type......Location
1234..........1............Paint .....Address A
1234..........2............Electric...Address B
1234..........3............Floor..... Address C

View 7 Replies View Related

Remember The Selected Record - Requery - Then Go Back To Selected Record...

Jun 28, 2005

Hi guys,

Bit of a problem I'm hoping someone can help with. I have a telephone call logging system. The system is a tabbed form with each tab representing a person's Telephone Call Inbox. As new calls are entered into the database, they appear in each person's inbox until they are marked as dealt with.

This all works fine and there are no problems with the basics of it, but the problem I do have is that after I have split the database into a Back end and a Front end and distributed the Front ends to each user, when a new call is entered it doesn't appear in the persons inbox until they do a requery.

At first I sent the form to requery using the ontimer event, but the problem I have is that after every reqery the form goes back to the first record. A user on the office forum suggested I use the following code:

vCurrent = Me.Bookmark
Me.Requery
Me.Bookmark = vCurrent

But this gives me invalid bookmark errors, so I was then told to add

On Error Resume Next

But this stops the bookmark function working and instead the first record is loaded every 1 minute (as set by my timer).

Can anyone recommend a better way that actually works without invalid bookmark errors?

View 14 Replies View Related

Forms :: Combo Box With Msgbox If Selected Item Is Not In Record

Oct 30, 2014

I want a Messagebox to be appear if the selected item or if the input item in the combobox was not in the record.

I used this condition in combobox

="[asstnumbr] = " & "'" & [Screen].[ActiveControl] & "'"

but when I try this run code function in macro via IFF will become error

IIf([asstnumbr]<>"'" & [Screen].[ActiveControl] & "'",MsgBox("NO RECORD FOUND IN YOUR SEARCH"))

View 1 Replies View Related

Forms :: Sourcing Data From Subform Selected Record

Apr 24, 2013

I have a main form (frmMain) and a sub form (frmChild), set as datasheet. The first field in the datasheet is set as a hyperlink and opens another form correctly. What I would like is if the user selects a record on frmChild, then a textbox on frmMain is populated by the corresponding value in the second column of the datasheet. Is it possible to do this via vba, and if so, how? I've read about solutions by using continous forms, but I'd like to stay with datasheet format if possible.

View 2 Replies View Related

Forms :: Subform Datasheet Record Selected Display

Dec 2, 2014

In Access 2010, if you have a form with a subform in datasheet view, and you move the focus away from the subform, how can you tell which record(s) on the subform are selected?

When the subform has the focus, the selected row is shown with a blue/grey tint. But as soon as the subform loses the focus, this disappears and all rows look identical.

Its an issue as I have 2 datasheet subforms on my main form, with the 2nd showing records related to the record selected in the 1st. But as soon as the 2nd subform receives the focus, it is impossible to see which record in subform 1 was selected.

I have tried conditional formatting, but that does not work.

View 1 Replies View Related

Forms :: Populate Listbox Based On Selected Record

Jul 15, 2013

I'm using a sub form to display data form a table. The users wanted it display like a spread sheet. In order to get all the data to display on the same page I am trying to break some of the longer feilds out (i.e. comment field) and display them in a list/text box and not in the table with the smaller fields.

Basically what will happen is when a record is selected in the sub form the comment field tied to each record will be displayed below. I've tried a few things but I keep getting errors displayed in my list/text box (#Name?)

View 14 Replies View Related

Forms :: Code To Pick A Field From A Record Selected Via List

Dec 11, 2014

I have a query with the following structure;

aDate(pkey) cost1 cost2 cost3 calc1 calc2 calc3
01/012014 ,,,,,,,,,1,,,,,, 2,,,,,,, 3,,,,,, 1,,,,,,, 2,,,,, 3
01/02/2014 ,,,,,,,,1,,,,,, 2,,,,,,,, 3,,,,,, 2,,,,,, 4,,,,,, 6
01/03/2014,,,,,,, 1 ,,,,, 2,,,,,,, 3,,,,,,, 3,,,,,, 6 ,,,,, 9
01/04/2014 ,,,,,, 1,,,,,,,, 2,,,,,,, 3 ,,,,, 4,,,,,, 8,,,,,, 12

fields calc1,2,3 are running totals of cost1,2,3

I expect/hope to first calculate the sum of a cost field and then minus the value of its corresponding calc field from a specific record.

result = sum(cost1) - calc1 selected record value

I want to select the calc1 record from a drop down list of the primary key. Which cost field is in the equation will static/defined as I intend to make a textbox for each field.i need to know the code to pick a field(and retrieve it's value) from a record selected via dropdown list.

View 4 Replies View Related

Forms :: Display Button On Selected Record In Continuous Form

Oct 30, 2014

I have continuous form in Access 2010. I highlight selected record. Now I would like when user will select record, that record will display button to give ability user delete it. For not selected records button not visible and disable. How to display button only in selected record in continuous form?

View 2 Replies View Related

Forms :: Access 2010 The Same Record Be Selected In Each List Box Within The Form With Tabs

Sep 21, 2013

I have a form with 3 tab controls. Within each tab, there is a bound list box that lists records based on a combo box selection. All list boxes are bound to the same table and records in each tab will be in the same order.

Tab1, listbox1:Field1, Field2, Field3, Field4
Tab2, listbox2, Field1,Field2, Field5, Field6
Tab3, listbox3:Field1, Field2, Field7, Field8,Field9

I would like the same record be selected in each list box within the tabs, e.g. when record #2 is selected on tab1, the same record will be selected on tab2 and tab3, or if I click on tab 2 again and change the selection to record #3, record #3 will be selected on tab1 and tab2.

View 3 Replies View Related

Forms :: Main Form Show Record Selected Within Datasheet Subform

Sep 30, 2013

The situation is i have two forms, looking at the same table, but the main table shows more records, I would like to select a record in the datasheet subform and have the main form flick through to the corresponding record.

View 5 Replies View Related

Forms :: Unable To Get Preview Selected Record Function To Pull UniqueID Field

Aug 22, 2014

I am attaching a picture of what I am talking about as this is going to get confusing...at least it is for me.

I have a Navigation Form that holds 7 tabs that pull reports or data entry forms.

I am trying to get the Preview Selected Record function to pull the UniqueID field from the Data Entry Form and generate a report for printing.

I can search by UniqueID in the data entry form with no problem, it is linked to two subforms with no problem.

Here is the code I have used most successfully:

Code:
DoCmd.OpenReport "rpt1", acViewPreview,, "UniqueID =" & Forms!MainForm!NavigationSubform.Form.UniqueID

This actually works, but every time the print preview is closed, it crashes Access. I have researched this particular issue, and some of the solutions I have read and tried lead to "that method is not allowed or supported" errors or Run-Time 438 errors.

View 9 Replies View Related

Forms :: Setting New Record View As Default?

Oct 28, 2014

How to set a new record view as default in form view???

View 1 Replies View Related

Forms :: Datasheet View Textbox Fills With Same Value For Every Record?

Jun 13, 2014

Some background: I have a subform that is displayed in datasheet view, with an unbound textbox (field1) whose sole purpose is to pass the date and time entered into it to field2 (hidden, bound), and also display that info in this format: ddhhnn"Z" mm yy. The inputmask for field1 is 000000"Z ">LLL�0 which forces the user to enter the date/time using the ddhhnn"Z" mm yy format. I use field1's AfterUpdate event to convert its contents into a format (dd/MMM/yy hh:mm) that field2 can easily recognize as a date and time.

My problem: The only way I've figured out to get field1 to display field2's date and time is to use the subform's OnCurrent event:

Code:
Me.field1 = Format([Field2], "ddhhnn""Z ""mmm yy")

However, by doing that, whenever I click on a record's row the entire field1 column populates with the current record's field1 value. So, if I click on record 2's row, the entire field1 column populates with "101200Z JUN14" for every record. If I click on record 3's row, the entire field1 column populates with "111232Z JUN14" for every record. And so on and so forth.

How can I stop field1 from populating with the same value for every record?

View 3 Replies View Related

Forms :: Location Of New Record Line When In Data Sheet View

Aug 19, 2013

On a subform that records notes in datasheet view (columns: Date, Note; sorted in reverse chronological order with newest at the top), is there a way to get the blank new record line to appear at the top? Otherwise, you have to counter-intuitively scroll down below the oldest entry to enter a new line.

We could sort in chronological order, but then the most relevant notes would sometimes be scrolled off the bottom of the form and not seen.

View 2 Replies View Related

Reports :: Selected Field From Table Not Show Up When Click View Report?

Aug 30, 2013

I am using access 2007. I click on a table for example. I then click blank report to make a report.

I then insert a text box and then go to control source to select a field from that table. The field doesn't show up when i click view report?

View 2 Replies View Related

Query In Forms Question (printing A Single Selected Query Record From A Form?)

Oct 19, 2004

What is the best way to impliment a query in a form so that the user can view the query records, and have the option to print or save the selected record using command buttons?

I tried subforms but I could not get the command buttons to work in the subform after it went into the form, it wanted to print the entire form instead of the selected record from the subform.

So in a nutshell I have 3-4 queries that are built, and I want to have them show up on my form in a format that the user can scroll through the results and select a single record of the results and then print or save that individual record from the form, if such a thing is possible.

Thanks in advance

Todd

View 1 Replies View Related

Forms :: Text Boxes Showing In Design View But Not Display In Form View

Apr 19, 2014

I have a Form which I have linked correctly to a subform. The Text boxes are showing in the Design view but are not when one switches to the Form View. Labels for Fields are visible in the Form View. Have even created a new subform and that will also not display the Text Boxes.

View 1 Replies View Related

Forms :: Unable To View Object Properties In Form Design View (Access 2010)

May 16, 2014

Why the ability to view the properties of an object within a form is not available when you double click on it in design view?

I was happily working away double clicking on a command button to edit some code when for some reason the next time I tried to edit it did not open up for me.

I was unable to access it even by right clicking on the object & selecting properties as that also appears to be disabled, not greyed out or anything but just does nothing when selected.

Have I inadvertently changed a setting somewhere that prevents the properties from being displayed?

View 3 Replies View Related

!!??? All My Forms Are Blank Under Form View - But Fine Under Design View!!!

Jul 13, 2006

Anybody ever heard of this before? I open a form, and it is empty, just a blank window. I open the same form in Design View, all appears well. :mad:

View 2 Replies View Related

Forms :: No Filters - Cannot View All Records In Form View

Aug 27, 2013

I have 4 tables and around 440 records but can only view up to 417 in the form I have designed. I have been adding new records via form and it has been added to my main table, but when i try to view it in form view - the record is not available to view. What do I need to do to correct this problem?

I have checked that there are no filters, data entry is set to No, Auto deletions, additions and edits are set to yes.

Also to mention it seems that the problem has arisen since I set up some new queries, there is a one to one relationship between the tables!

View 1 Replies View Related

Forms :: From Pivot View To Filtered Datasheet View

Nov 14, 2013

I want to "zoom" to the underliyng data from pivot view. When in excel someone doubleclicks a field in a pivot table, it automatically creates a table containing all the lines that field were made up from. I want to achieve the same behaviour in Access.I started to think towards a VBA coda, that could be initiated from the form's double click event. It should go to datasheet view with the prpoer filter criterias.

View 1 Replies View Related

Forms :: Display Data In Form As Select Record In Subform In Data Sheet View

Nov 11, 2013

i have a main form named(EMP) i have a subform named(SEMP)with EMPID i have an another form Named(SDetail) with EMPID i want to open form Sdetail with filter records for data select in subform (SEMP) ,EMPID field Subform SEMP in as datasheet view. i can open sdetail for selected records only

View 14 Replies View Related

Reports :: View One Record From Master Table And Many Record From Slave Tables

Dec 23, 2013

I have got problem with ms access report. I want to make a report which is based on

1) first master table
2) first slave table
3) second slave table

I have done some research and decided to do some form with subform. So I have got the view one record from master table and many record from slave tables in one view.

But it turned out that it has become duplicate records. (the relationship are ok - it duplicate master record as many as slave records)

So:
1) how i can do ms access report from multiple tables - one master record with multiple records form slaves tables

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved